2003 Hyundai H-1 (Grand Starex) keyless

BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
1-10 B070C01FC-GAT
Alarm Stage
Alarm Stage Alarm Stage
Alarm Stage
Alarm Stage
B070C02P
B070A01P-GAT
THEFT-ALARM SYSTEM
THEFT-ALARM SYSTEM THEFT-ALARM SYSTEM
THEFT-ALARM SYSTEM
THEFT-ALARM SYSTEM
(Minibus only) (If installed)
(Minibus only) (If installed) (Minibus only) (If installed)
(Minibus only) (If installed)
(Minibus only) (If installed) This system is designed to provide protection
from unauthorized entry into the car. This sys- tem is operated in three stages: the first is the"Armed" stage, the second is the "Alarm" stage,and the third is the "Disarmed" stage. If trig-gered, the system provides an audible alarmwith blinking of the turn signal light. B150B01P-GAT
CENTRAL DOOR LOCKS
CENTRAL DOOR LOCKS CENTRAL DOOR LOCKS
CENTRAL DOOR LOCKS
CENTRAL DOOR LOCKS
(For Truck) (If installed)
(For Truck) (If installed) (For Truck) (If installed)
(For Truck) (If installed)
(For Truck) (If installed) The central door locking system is located on the driver's door lock button. It is operated bydepressing the door lock button. If the front dooris open when the button is depressed, the doorwill lock when closed.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
When the front door lock button is de-
When the front door lock button is de- When the front door lock button is de-
When the front door lock button is de-
When the front door lock button is de-
pressed, the front doors will lock. When the
pressed, the front doors will lock. When the pressed, the front doors will lock. When the
pressed, the front doors will lock. When the
pressed, the front doors will lock. When the
front door lock button is pulled up, the front
front door lock button is pulled up, the front front door lock button is pulled up, the front
front door lock button is pulled up, the front
front door lock button is pulled up, the front
doors will unlock.
doors will unlock. doors will unlock.
doors will unlock.
doors will unlock. B070B01O-AAT
Armed Stage
Armed Stage Armed Stage
Armed Stage
Armed Stage CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
Do not arm the system until all passengers
Do not arm the system until all passengers Do not arm the system until all passengers
Do not arm the system until all passengers
Do not arm the system until all passengers
have left the car. If the system is armed
have left the car. If the system is armed have left the car. If the system is armed
have left the car. If the system is armed
have left the car. If the system is armed
while a passenger(s) remains in the car, the
while a passenger(s) remains in the car, the while a passenger(s) remains in the car, the
while a passenger(s) remains in the car, the
while a passenger(s) remains in the car, the
alarm may be activated when the remaining
alarm may be activated when the remaining alarm may be activated when the remaining
alarm may be activated when the remaining
alarm may be activated when the remaining
passenger(s) leaves the car.
passenger(s) leaves the car. passenger(s) leaves the car.
passenger(s) leaves the car.
passenger(s) leaves the car.
B070B02P
LOCK
UNLOCK
Park the car and stop the engine. Arm the system as described below.
1) Remove the ignition key from the ignition switch.
2) Make sure that the engine hood and tail gate are locked.
3) Lock the doors using the transmitter of the keyless entry system.
After completion of the steps above, the turnsignal light will blink once to indicate that thesystem is armed.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
1)1)
1)1)
1) If any door, tail gate or engine hood
If any door, tail gate or engine hood If any door, tail gate or engine hood
If any door, tail gate or engine hood
If any door, tail gate or engine hood
remains open, the system will not be
remains open, the system will not be remains open, the system will not be
remains open, the system will not be
remains open, the system will not be
armed.
armed. armed.
armed.
armed.
2)2)
2)2)
2) If this happens, rearm the system as
If this happens, rearm the system as If this happens, rearm the system as
If this happens, rearm the system as
If this happens, rearm the system as
described above.
described above. described above.
described above.
described above. The alarm will be activated if any of the follow- ing occurs while the car is parked and thesystem is armed.
1) A front or rear door is opened without using the transmitter.
2) The tail gate is opened without using the transmitter.
3) The engine hood is opened.
The alarming horn will sound and the turn signallight will blink continuously for 27 seconds (E.C

1-11
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
B070D02O-AAT
Disarmed Stage
Disarmed Stage Disarmed Stage
Disarmed Stage
Disarmed Stage The system will be disarmed when the driver’s
or passenger’s door is unlocked by depressing the "UNLOCK" button on the transmitter.
After completion of the step above, the turn
signal light will blink twice to indicate that thesystem is disarmed.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
Once the system has been disarmed, it can
Once the system has been disarmed, it can Once the system has been disarmed, it can
Once the system has been disarmed, it can
Once the system has been disarmed, it can not be rearmed except by repeating the
not be rearmed except by repeating the not be rearmed except by repeating the
not be rearmed except by repeating the
not be rearmed except by repeating the
arming procedures.
arming procedures. arming procedures.
arming procedures.
arming procedures.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
Only the transmitter can disarm the armed
Only the transmitter can disarm the armed Only the transmitter can disarm the armed
Only the transmitter can disarm the armed
Only the transmitter can disarm the armedstage. If the transmitter does not disarm the
stage. If the transmitter does not disarm the stage. If the transmitter does not disarm the
stage. If the transmitter does not disarm the
stage. If the transmitter does not disarm the
system, it is necessary to take the following
system, it is necessary to take the following system, it is necessary to take the following
system, it is necessary to take the following
system, it is necessary to take the following
steps;
steps; steps;
steps;
steps;
1.1.
1.1.
1.
Unlock the door with the key, which will
Unlock the door with the key, which will Unlock the door with the key, which will
Unlock the door with the key, which will
Unlock the door with the key, which will
cause, the alarm to be activated.
cause, the alarm to be activated. cause, the alarm to be activated.
cause, the alarm to be activated.
cause, the alarm to be activated.
2.2.
2.2.
2. Insert the key in the ignition key cylinder
Insert the key in the ignition key cylinder Insert the key in the ignition key cylinder
Insert the key in the ignition key cylinder
Insert the key in the ignition key cylinder
and turn the ignition key to "ON" posi-
and turn the ignition key to "ON" posi- and turn the ignition key to "ON" posi-
and turn the ignition key to "ON" posi-
and turn the ignition key to "ON" posi-
tion.
tion. tion.
tion.
tion. B070F01A-GAT
Keyless Entry System (If installed)
Keyless Entry System (If installed) Keyless Entry System (If installed)
Keyless Entry System (If installed)
Keyless Entry System (If installed)
Locking doors
Locking doors Locking doors
Locking doors
Locking doors
1. Close all doors.
2. Push the "LOCK" button on the transmitter.
3. At the same time all doors lock, the turn signal lamp will blink once to indicate thatthe system is armed.
Unlocking doors
Unlocking doors Unlocking doors
Unlocking doors
Unlocking doors
1. Push the "UNLOCK" button on the transmit- ter.
2. At the same time all doors unlock, the turn signal lamp will blink twice to indicate thatthe system is disarmed.
only/ Except E.C 3 times). To turn off thesystem, unlock the door or tail gate with thetransmitter.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
Avoid trying to start the engine while the
Avoid trying to start the engine while the Avoid trying to start the engine while the
Avoid trying to start the engine while the
Avoid trying to start the engine while the
system is armed.
system is armed. system is armed.
system is armed.
system is armed.
2. Remove the old battery from the case andnote the polarity. Make sure the polarity ofthe new battery is the same(+side facingdown), then insert it in the transmitter.
B070E02P
B070E02HP-GAT
Replacing the battery
Replacing the battery Replacing the battery
Replacing the battery
Replacing the battery When the transmitter's battery begins to get
weak, it may take several pushes on the button to lock or unlock the doors, and the LED will notlight. Replace the battery as soon as possible.
Battery type : CR2032 1. Separate the case with a phillips screw-
driver.
B070E01P
3.3.
3.3.
3. Wait for 30 seconds.
Wait for 30 seconds. Wait for 30 seconds.
Wait for 30 seconds.
Wait for 30 seconds.
After completing the steps above, the sys-
After completing the steps above, the sys- After completing the steps above, the sys-
After completing the steps above, the sys-
After completing the steps above, the sys- tem will be disarmed.
tem will be disarmed. tem will be disarmed.
tem will be disarmed.
tem will be disarmed. Replacement instructions: