2-45
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B260D01O-AAT 1.1.
1.1.
1. Playing CD
Playing CD Playing CD
Playing CD
Playing CD
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation.
o When a disc is in the CD deck, if you press the play button, the CD player will begin playing even if the radio is being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3.
TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press once to skip forward to the beginn- ing of the next track. Press once to skipback to the beginning of the track.
4.4.
4.4.
4. SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track. 5.5.
5.5.
5. REPEAT Button
REPEAT Button REPEAT Button
REPEAT Button
REPEAT Button
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation, when the track ends, it will automatically be re-played.This process will be continued until youpush the button again.
6.6.
6.6.
6.
EJECT Button
EJECT Button EJECT Button
EJECT Button
EJECT Button
When the EJECT button is pressed with theCD loaded, the CD is ejected. NOTE:
o To assure proper operation of the unit, keep the vehicle interior temperature within a normal range by using thevehicle's air conditioning or heating sys-tem.
o When replacing the fuse, replace it with a fuse having the correct capacity.
o The preset station frequencies are all erased when the car battery is discon-nected. Therefore, all data will have to beset again if this should occur.
o Do not add any oil to the rotating parts. Keep magnets, screwdrivers and othermetallic objects away from the tapemechanism and head.
o This equipment is designed to be used only in a 12 volt DC battery system withnegative ground. o This unit is made of precision parts. Do
not attempt to disassemble or adjust anyparts.
o When driving your vehicle, be sure to keep the volume of the unit set lowenough to allow you to hear sounds com-ing from the outside.
o Do not expose this equipment (including the speakers) to water or excessive mois-ture.
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-54 H290F01O-GAT
1.1.
1.1.
1. CD Select Button
CD Select Button CD Select Button
CD Select Button
CD Select Button
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation or cassette tape playing.
o When a disc is in the CD deck, if you press the play button the CD player will begin playing even if the radio or cassette playeris being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3. TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press button once to skip forward to the beginning of the next track. Press buttononce to skip back to the beginning of thetrack. 4.4.
4.4.
4. REPEAT
REPEAT REPEAT
REPEAT
REPEAT
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation when the track ends, it will automatically be re-played. This process will be continued until you push the button again.
5.5.
5.5.
5.
EQUALIZER Button
EQUALIZER Button EQUALIZER Button
EQUALIZER Button
EQUALIZER Button
Press the EQ button to select the CLASSIC,
JAZZ, ROCK and DEFEAT MODE for the de-sired tone quality. Each press of the buttonchanges the display as follows; NOTE:
NOTE: NOTE:
NOTE:
NOTE:
oo
oo
o To assure proper operation of the unit,
To assure proper operation of the unit, To assure proper operation of the unit,
To assure proper operation of the unit,
To assure proper operation of the unit,
keep the vehicle interior temperature
keep the vehicle interior temperature keep the vehicle interior temperature
keep the vehicle interior temperature
keep the vehicle interior temperature
within a normal range by using the
within a normal range by using the within a normal range by using the
within a normal range by using the
within a normal range by using the
vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys- vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys-
vehicle's air conditioning or heating sys-
tem.tem.
tem.tem.
tem.
oo
oo
o When replacing the fuse, replace it with a
When replacing the fuse, replace it with a When replacing the fuse, replace it with a
When replacing the fuse, replace it with a
When replacing the fuse, replace it with a
fuse having the correct capacity.
fuse having the correct capacity. fuse having the correct capacity.
fuse having the correct capacity.
fuse having the correct capacity.
oo
oo
o The preset station frequencies are all
The preset station frequencies are all The preset station frequencies are all
The preset station frequencies are all
The preset station frequencies are all
erased when the car battery is discon-
erased when the car battery is discon- erased when the car battery is discon-
erased when the car battery is discon-
erased when the car battery is discon-
nected. Therefore, all data will have to be
nected. Therefore, all data will have to be nected. Therefore, all data will have to be
nected. Therefore, all data will have to be
nected. Therefore, all data will have to be
set again if this should occur.
set again if this should occur. set again if this should occur.
set again if this should occur.
set again if this should occur.
oo
oo
o Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts. Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts.
Do not add any oil to the rotating parts.
Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other
Keep magnets, screwdrivers and other
metallic objects away from the tape
metallic objects away from the tape metallic objects away from the tape
metallic objects away from the tape
metallic objects away from the tape
mechanism and head.
mechanism and head. mechanism and head.
mechanism and head.
mechanism and head.
oo
oo
o This equipment is designed to be used
This equipment is designed to be used This equipment is designed to be used
This equipment is designed to be used
This equipment is designed to be used
only in a 12 volt DC battery system with
only in a 12 volt DC battery system with only in a 12 volt DC battery system with
only in a 12 volt DC battery system with
only in a 12 volt DC battery system with
negative ground.
negative ground. negative ground.
negative ground.
negative ground.
oo
oo
o This unit is made of precision parts. Do
This unit is made of precision parts. Do This unit is made of precision parts. Do
This unit is made of precision parts. Do
This unit is made of precision parts. Do
not attempt to disassemble or adjust any
not attempt to disassemble or adjust any not attempt to disassemble or adjust any
not attempt to disassemble or adjust any
not attempt to disassemble or adjust any
parts.
parts. parts.
parts.
parts.
oo
oo
o When driving your vehicle, be sure to
When driving your vehicle, be sure to When driving your vehicle, be sure to
When driving your vehicle, be sure to
When driving your vehicle, be sure to
keep the volume of the unit set low
keep the volume of the unit set low keep the volume of the unit set low
keep the volume of the unit set low
keep the volume of the unit set low
enough to allow you to hear sounds com-
enough to allow you to hear sounds com- enough to allow you to hear sounds com-
enough to allow you to hear sounds com-
enough to allow you to hear sounds com-
ing from the outside.
ing from the outside. ing from the outside.
ing from the outside.
ing from the outside.
oo
oo
o Do not expose this equipment (including
Do not expose this equipment (including Do not expose this equipment (including
Do not expose this equipment (including
Do not expose this equipment (including
the speakers and tape) to water or exces-
the speakers and tape) to water or exces- the speakers and tape) to water or exces-
the speakers and tape) to water or exces-
the speakers and tape) to water or exces-
sive moisture.
sive moisture. sive moisture.
sive moisture.
sive moisture.
CLASSIC
JAZZ ROCK DEFEAT
6.6.
6.6.
6.
CD EJECT Button
CD EJECT Button CD EJECT Button
CD EJECT Button
CD EJECT Button
When the button is pressed with the CD
loaded, the CD is ejected.
7.7.
7.7.
7. SCAN Button (If installed)
SCAN Button (If installed) SCAN Button (If installed)
SCAN Button (If installed)
SCAN Button (If installed)
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track.
STARTING & OPERATING
STARTING & OPERATING STARTING & OPERATING
STARTING & OPERATING
STARTING & OPERATING
3-16 D180H01P-GAT
Parking brake
Parking brake Parking brake
Parking brake
Parking brake
If the atmospheric temperature is below freez- ing, park the vehicle with the gearshift lever in1st or reverse and do not engage the parkingbrake. If the parking brake is engaged and thereis moisture on the brake linings, the liningscould become frozen to the brake drums, mak-ing it impossible to release the parking brake.
C160G02A-AAT
To Keep Locks from Freezing
To Keep Locks from Freezing To Keep Locks from Freezing
To Keep Locks from Freezing
To Keep Locks from Freezing
To keep the locks from freezing, squirt anapproved de-icer fluid or glycerine into the keyopening. If a lock is covered with ice, squirt itwith an approved de-icing fluid to remove theice. If the lock is frozen internally, you may beable to thaw it out by using a heated key.Handle the heated key with care to avoid burn-ing your fingers.
NOTE:
NOTE: NOTE:
NOTE:
NOTE:
The proper temperature for using the immo-
The proper temperature for using the immo- The proper temperature for using the immo-
The proper temperature for using the immo-
The proper temperature for using the immo-
bilizer key is from -40°C to 80°C. If you heat
bilizer key is from -40°C to 80°C. If you heat bilizer key is from -40°C to 80°C. If you heat
bilizer key is from -40°C to 80°C. If you heat
bilizer key is from -40°C to 80°C. If you heat
the immobilizer key over 80°C to open the
the immobilizer key over 80°C to open the the immobilizer key over 80°C to open the
the immobilizer key over 80°C to open the
the immobilizer key over 80°C to open the
frozen lock, it may cause damage to the
frozen lock, it may cause damage to the frozen lock, it may cause damage to the
frozen lock, it may cause damage to the
frozen lock, it may cause damage to the
transponder in its head.
transponder in its head. transponder in its head.
transponder in its head.
transponder in its head. D180G01P-GAT
Door locks
Door locks Door locks
Door locks
Door locks
To prevent the door locks from freezing up, the lock cylinders should be masked with tape,etc., when washing the vehicle in cold weatherto prevent the entrance of water.
D180E01P-GAT
Wiper blades
Wiper blades Wiper blades
Wiper blades
Wiper blades
Before operating the wipers, check the wiperblades to confirm that they are not frozen to thewindshield or tailgate. If the blades are frozen tothe windshield or tailgate, do not operate thewipers until the ice has melted and the bladesare freed. D180F01P-GAT
Ventilation slots
Ventilation slots Ventilation slots
Ventilation slots
Ventilation slots
The ventilation slots in the headlight housing on the assistant seat side should be brushed clearafter a heavy snowfall so that the operation ofthe heating and ventilation systems will not beimpaired.
anyway, will only deliver a fraction of the startercurrent which is normally available. It is recommended that you have the battery checked by an authorized HYUNDAI dealerbefore the start of cold weather and, if neces-sary, have it charged. This not only ensures reliable starting, but a battery which is kept fully charged also has alonger life. D180D01P-GAT
Washer fluid
Washer fluid Washer fluid
Washer fluid
Washer fluid
To ensure proper operation of the windshield or rear window at low temperatures, anti-freezeshould be added to the washer fluid at a rate ofone part antifreeze to one part water.
D180A01P-GAT
DURING COLD WEATHER
DURING COLD WEATHER DURING COLD WEATHER
DURING COLD WEATHER
DURING COLD WEATHER
Engine oil
Engine oil Engine oil
Engine oil
Engine oil
The engine oil can become very thick at low
temperatures, thus making it difficult to start theengine.
Change to a thinner oil designed for winter use
before the start of cold weather; for the appro-priate oil viscosity, refer to the "Consumer Infor-mation" section.
D180B01P-GATEngine coolant
Engine coolant Engine coolant
Engine coolant
Engine coolant
If the temperature in your area drops below
freezing, there is the danger that the coolant inthe engine or radiator could freeze and causesevere damage to the engine and/or radiator. Be sure to add a sufficient amount of antifreeze
to the coolant to prevent it from freezing.
The engine coolant mixture used at the factory
is intended to be left in the cooling system andprovides protection against freezing for tem-perature as low as approximately -30°C (-20°F).The concentration should be checked beforethe start of cold weather and anti-freeze addedto the system if necessary
D180C01P-GATBattery
Battery Battery
Battery
Battery
The capacity of the battery is reduced at low
temperatutes.
This is an inevitable result of its chemical and
physical properties. This is why a very coldbattery, particularly one that is not fully charged
IN CASE OF EMERGENCY
IN CASE OF EMERGENCY IN CASE OF EMERGENCY
IN CASE OF EMERGENCY
IN CASE OF EMERGENCY
4-16 A bulb should only be replaced with a new bulb of the same rating and type. The designationcan be found on the base of the bulb. Headlight, upper/lower beam ................ 60/55WFront turn-signal lamps ................................ 21WPosition lamps ............................................... 5WRear turn-signal lamps ................................. 21W Reversing lamps .......................................... 21W Licence-plate lamps ....................................... 5WStop and tail lamps ................................. 21/5WFront fog lamp .............................................. 55WSide repeater lamp ....................................... 5WRear fog lamp ............................................ 21W
E130D01P-1
Truck
E130B01P-1
E130C01P-1
Truck
Minibus/Van
E130B01P-GAT Bulb capacity
Bulb capacity Bulb capacity
Bulb capacity
Bulb capacity
E130A01P-1
Minibus/Van
E130A02P-GAT
REPLACEMENT OF LAMP BULBS
REPLACEMENT OF LAMP BULBS REPLACEMENT OF LAMP BULBS
REPLACEMENT OF LAMP BULBS
REPLACEMENT OF LAMP BULBS
Before replacing a bulb, be sure the light is off.
Do not touch the glass part of the new bulb with your bare fingers; the skin oil left on the glasswill evaporate when the bulb gets hot and thevapor will condense on the reflector and dim thesurface.
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
Keep the lamps out of contact with petro-
Keep the lamps out of contact with petro- Keep the lamps out of contact with petro-
Keep the lamps out of contact with petro-
Keep the lamps out of contact with petro- leum product, such as oil, gasoline, etc.
leum product, such as oil, gasoline, etc. leum product, such as oil, gasoline, etc.
leum product, such as oil, gasoline, etc.
leum product, such as oil, gasoline, etc.(2)(2)
(2)(2)
(2)
Never use a fuse with a capacity larger
Never use a fuse with a capacity larger Never use a fuse with a capacity larger
Never use a fuse with a capacity larger
Never use a fuse with a capacity larger
than that specified or any substitute, such
than that specified or any substitute, such than that specified or any substitute, such
than that specified or any substitute, such
than that specified or any substitute, such
as wire, foil, etc.;doing so will cause the
as wire, foil, etc.;doing so will cause the as wire, foil, etc.;doing so will cause the
as wire, foil, etc.;doing so will cause the
as wire, foil, etc.;doing so will cause the
circuit wiring to heat up and can cause a
circuit wiring to heat up and can cause a circuit wiring to heat up and can cause a
circuit wiring to heat up and can cause a
circuit wiring to heat up and can cause a
fire.fire.
fire.fire.
fire.
INDEX
INDEX INDEX
INDEX
INDEX
10-2 EMISSION CONTROL SYSTEM
........................................................... 7-1
ENGINE ........................................................................................................ 9-2
ENGINE COOLANT .................................................................................. 8-9
ENGINE NUMBER .................................................................................... 1-2
ENGINE OIL .................................................................................... 8 - 7 ~ 8 - 8
ENGINE OVERHEATING ........................................................ 4-11 ~ 4-12
ENGINE RPM ADJUSTMENT KNOB ...............................................2-15
ENGINE WARNING LIGHT ................................................................. 2-10
EXTERIOR AND INTERIOR LAMP OPERATION .........................8-13
F FOUR-WHEEL DRIVE (4WD) ..................................................3-9 ~ 3-10
FOURTH SEAT ....................................................................................... 1-21
FRONT DOOR EDGE WARNING LIGHT .......................................2-15
FRONT DOOR WINDOW GLASS .....................................................1-17
FRONT FOG LAMP SWITCH ........................................................... 2-16
FRONT INTERIOR LIGHT ................................................................... 2-17
FRONT ROOM LAMP ........................................................................... 2-18
FRONT SEATS ....................................................................................... 1-18
FUEL FILTER WARNING LAMP-RED ................................................. 2-9
FUEL GAUGE ............................................................................................. 2-5
FUEL TANK CAPACITY .......................................................................... 9-1
FUEL, ENGINE COOLANT, OIL, AND EXHAUST GAS LEAKAGE .................................................................................... 8-13
FUSES ....................................................................................................... 4-15
G GASOLINE ENGINE ROOM .................................................................. 8-5
GOOD BRAKING PRACTICE ............................................................. 3-11H
HAZARD WARNING LIGHT SWITCH ..............................................2-16
HEADLAMP LEVELING DEVICE SYSTEM ....................................2-14
HEADREST .............................................................................................. 1-22
HEATING AND COOLING ...................................................... 2-24 ~ 2-25
HEATING CONTROLS .......................................................................... 2-25
HEIGHT ADJUSTABLE FRONT SEAT SHOULDER BELT .......1-23
HIGH-BEAM INDICATION LAMP-BLUE .............................................. 2-9
HIGH-BEAM SWITCH ........................................................................... 2-11
HINGED WINDOW .................................................................... 1-16 ~ 1-17
HINGES AND LATCHES LUBRICATION ........................................8-15
"HOLD" MODE SWITCH ......................................................................... 3-7
HOOD RELEASE .................................................................................... 1-12
HORN SWITCH ....................................................................................... 2-17
I IF A TIRE IS FLATENED ............................................................ 4 - 6 ~ 4 - 8
IF THE ENGINE OVERHEATS .............................................4-11 ~ 4-12
IGNITION SWITCH ................................................................................... 3-1
ILLUMINATED IGNITION SWITCH ...................................................... 1-8
IMMOBILIZER SYSTEM .............................................................. 1 - 5 ~ 1 - 8
INCLINOMETER ......................................................................................... 2-6
INDEX ........................................................................................................ 10-1
INDICATION AND WARNING LAMPS ..................................2-9 ~ 2-10
INSIDE REAR-VIEW MIRROR ........................................................... 2-21
INSTALLATION OF ACCESSORIES ................................................... 1-3
INSTRUMENTS .......................................................................................... 2-3
INSTRUMENTS PANEL LIGHT CONTROL (=RHEOSTAT) ......2-14