2003 Hyundai H-1 (Grand Starex) radio

2-31
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
SSAR011ASSAR012A
SSAR010A
AM reception
Ionosphere
AM signal reception is usually better than FM
reception. This is because AM radio waves are transmitted at low frequency. These long, lowfrequency radio waves can follow the curvatureof the earth rather than travelling straight outinto the atmosphere. In addition, they curvearound obstructions so that they can providebetter signal coverage. Because of this, clearAM broadcasts can be received at greater dis-tances than FM broadcasts. Iron bridges
Unobstructed area
Mountains
Buildings
FM broadcasts are transmitted at high frequen-
cy and do not bend to follow the earth's surface. Because of this, FM broadcasts generally be-gin to fade at short distances from the station.Also, FM signals are easily affected by build-ings, mountains, or other obstructions. Thesecan result in certain listening conditions whichmight lead you to believe a problem exists withyour radio. The following conditions are normaland do not indicate radio trouble:
B750A01A-AAT
STEREO SOUND SYSTEM
STEREO SOUND SYSTEM STEREO SOUND SYSTEM
STEREO SOUND SYSTEM
STEREO SOUND SYSTEM
How Car Audio Works
How Car Audio Works How Car Audio Works
How Car Audio Works
How Car Audio Works
Ionosphere
FM reception
AM and FM radio signals are broadcast from
transmitter towers located around your city.They are intercepted by the radio antenna onyour car. This signal is then received by theradio and sent to your car speakers.
When a strong radio signal has reached your
vehicle, the precise engineering of your audiosystem ensures high quality reproduction. How-ever, in some cases the signal coming to yourvehicle is not strong and clear. This can be dueto factors such as the distance from the radiostation, closeness of other strong radio stationsor the presence of buildings, bridges or otherlarge obstructions in the area. FM radio station
Obstructed area

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-32 B750B02Y-AAT
Using a cellular phone or a two-way
Using a cellular phone or a two-way Using a cellular phone or a two-way
Using a cellular phone or a two-way
Using a cellular phone or a two-way
radio
radio radio
radio
radio When a cellular phone is used inside the vehi- cle, noise may be produced from the audioequipment. This does not mean that somethingis wrong with the audio equipment. In such acase, use the cellular phone at a place as far aspossible from the audio equipment.
CAUTION
CAUTION CAUTION
CAUTION
CAUTION
When using a communication system such
When using a communication system such When using a communication system such
When using a communication system such
When using a communication system such
a cellular phone or a radio set inside the
a cellular phone or a radio set inside the a cellular phone or a radio set inside the
a cellular phone or a radio set inside the
a cellular phone or a radio set inside the
vehicle, a separate external antenna must
vehicle, a separate external antenna must vehicle, a separate external antenna must
vehicle, a separate external antenna must
vehicle, a separate external antenna must
be fitted. When a cellular phone or a radio
be fitted. When a cellular phone or a radio be fitted. When a cellular phone or a radio
be fitted. When a cellular phone or a radio
be fitted. When a cellular phone or a radio
set is used by using an internal antenna
set is used by using an internal antenna set is used by using an internal antenna
set is used by using an internal antenna
set is used by using an internal antenna
alone, it may interfere with the vehicle's
alone, it may interfere with the vehicle's alone, it may interfere with the vehicle's
alone, it may interfere with the vehicle's
alone, it may interfere with the vehicle's
electrical system and adversely affect safe
electrical system and adversely affect safe electrical system and adversely affect safe
electrical system and adversely affect safe
electrical system and adversely affect safe
operation of the vehicle.
operation of the vehicle. operation of the vehicle.
operation of the vehicle.
operation of the vehicle.
WARNING:
WARNING: WARNING:
WARNING:
WARNING: Don't use a cellular phone when you are driving, you must stop at a safe place to usea cellular phone.
o Fading - As your car moves away from the
radio station, the signal will weaken andsound will begin to fade. When this occurs,we suggest that you select another strongerstation.
o Flutter/Static - Weak FM signals or large obstructions between the transmitter andyour radio can disturb the signal causingstatic or fluttering noises to occur. Reducingthe treble level may lessen this effect untilthe disturbance clears. o Station Swapping - As an FM signal weak-
ens, another more powerful signal near thesame frequency may begin to play. This isbecause your radio is designed to lock ontothe clearest signal. If this occurs, selectanother station with a stronger signal.
o Multi-Path Cancellation - Radio signals be- ing received from several directions cancause distortion or fluttering. This can becaused by a direct and a reflected signalfrom the same station, or by signals fromtwo stations with close frequencies. If thisoccurs, select another station until the con-dition has passed.
SSAR014ASSAR013A

2-33
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
5. TUNE/SEEK Button
K210A01P-GAT
STEREO RADIO OPERATION (K220) (If installed)
STEREO RADIO OPERATION (K220) (If installed) STEREO RADIO OPERATION (K220) (If installed)
STEREO RADIO OPERATION (K220) (If installed)
STEREO RADIO OPERATION (K220) (If installed)
K220A01TB-1
1. Power ON/OFF, VOLUME, BALANCE, SCAN Button
7. FADER Button 2. BASS/TREBLE-pull Button
3. Preset Buttons
4. LCD
6. FM/AM Button

2-37
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
K240A01TB
K240A01TB-GAT
STEREO RADIO OPERATION (H240, K240) (If installed)
STEREO RADIO OPERATION (H240, K240) (If installed) STEREO RADIO OPERATION (H240, K240) (If installed)
STEREO RADIO OPERATION (H240, K240) (If installed)
STEREO RADIO OPERATION (H240, K240) (If installed)
8. LCD
1. Power ON/OFF, VOLUME2. TUNE/SEEK Button
3. PRESET Buttons4. SCAN Button5. BASS/BAL pull Button 6. TREB/pull FAD Button
7. FM/AM Button

2-41
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
H260A01O-AAT
STEREO RADIO OPERATION (H260) (If
STEREO RADIO OPERATION (H260) (If STEREO RADIO OPERATION (H260) (If
STEREO RADIO OPERATION (H260) (If
STEREO RADIO OPERATION (H260) (If II
II
I nstalled)
nstalled) nstalled)
nstalled)
nstalled)
H260A01O
1. POWER ON-OFF/VOLUME/BALANCE Control Knob
2. FADER Control Knob
3. BASS/TREBLE Control Knob
4. SCAN Button 6. BAND Selector
5. TUNE/SEEK Select Button 7. PRESET Button

INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
2-42 3.3.
3.3.
3. BASS Control Knob
BASS Control Knob BASS Control Knob
BASS Control Knob
BASS Control Knob
Press to pop the knob out and turn to the left or right for the desired bass tone.
TREB (Treble Control) Knob
TREB (Treble Control) Knob TREB (Treble Control) Knob
TREB (Treble Control) Knob
TREB (Treble Control) Knob
Pull the bass control knob further out. Turn tothe left or right for the desired treble tone.
4.4.
4.4.
4.
SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
When the scan button is pressed, the fre-quency will increase and the receivable sta-tions will be tuned in one after another, receiv-ing each station for 5 seconds. To stop scan-ning, press the scan button again.
5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button 5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button
5. TUNE (Manual) Select Button
Press the ( ) side or ( ) side to increase or todecrease the frequency. Press either buttonand hold down to continuously scroll. Releasebutton once the desired station is reached.
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
SEEK Operation (Automatic Channel
Selection)
Selection) Selection)
Selection)
Selection)
Press the TUNE select button for 0.5 sec ormore, and releasing will automatically tune thenext available station with beep sound. When the ( ) side is pressed longer than 0.5 second and releasing will automatically tunethe next higher frequency and when the ( )side is pressed longer than 0.5 second andreleasing will automatically tune the next lowerfrequency. 6. BAND Selector
6. BAND Selector 6. BAND Selector
6. BAND Selector
6. BAND Selector
Pressing the button changes the AM, FM1and FM2 bands. The mode selected is dis-played on LCD.
7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button 7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button
7. PRESET STATION SELECT Button
Six (6) stations for AM, FM or FM2 respectivelycan be preset in the electronic memory circuiton this unit.
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
HOW TO PRESET STATIONS
Six AM and twelve FM stations may be pro-grammed into the memory of the radio. Then,by simply pressing the band select button and/or one of the six station select buttons, you mayrecall any of these stations instantly. To pro-gram the stations, follow these steps:
o Press band selector to set the band for AM, FM or FM2.
o Select the desired station to be stored by seek, scan or manual tuning.
o Determine the preset station select button you wish to use to access that station.
o Press the station select button for more than two seconds. A select button indicator willshow in the display indicating which selectbutton you have depressed. The frequencydisplay will flash after it has been stored intothe memory.
H260B02E-AAT
1.1.
1.1.
1. POWER ON-OFF Control Knob
POWER ON-OFF Control Knob POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
POWER ON-OFF Control Knob
The radio unit may be operated when the igni-
tion key is in the "ACC" or "ON" position. Pressthe knob to switch the power on. The LCDshows the radio frequency in the radio mode orthe CD track indicator in either the CD mode orCD AUTO CHANGER mode. To switch thepower off, press the knob again.
VOLUME Control
VOLUME Control VOLUME Control
VOLUME Control
VOLUME Control
Rotate the knob clockwise to increase the vol-
ume and turn the knob counterclockwise toreduce the volume.
BALANCE Control
BALANCE Control BALANCE Control
BALANCE Control
BALANCE Control
Pull and turn the control knob clockwise to
emphasize right speaker sound (Left speakersound will be attenuated). When the controlknob is turned counterclockwise, left speakersound will be emphasized. (Right speaker soundwill be attenuated)
2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob 2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob
2. FAD (Fader Control) Knob
Turn the control knob counterclockwise to em-
phasize front speaker sound. (Rear speakersound will be attenuated) When the controlknob is turned clockwise, rear speaker soundwill be emphasized. (Front speaker sound willbe attenuated)
FM/AM

2-45
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B260D01O-AAT 1.1.
1.1.
1. Playing CD
Playing CD Playing CD
Playing CD
Playing CD
o Insert the CD with the label facing upward.
o Insert the CD to start CD playback, during radio operation.
o When a disc is in the CD deck, if you press the play button, the CD player will begin playing even if the radio is being used.
o The CD player can be used when the igni- tion switch is in either the "ON" or "ACC"position.
2.2.
2.2.
2. FF/REW ( / )
FF/REW ( / ) FF/REW ( / )
FF/REW ( / )
FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
3.3.
3.3.
3.
TRACK UP/DOWN
TRACK UP/DOWN TRACK UP/DOWN
TRACK UP/DOWN
TRACK UP/DOWN
o The desired track on the disc currently be- ing played can be selected using the tracknumber.
o Press once to skip forward to the beginn- ing of the next track. Press once to skipback to the beginning of the track.
4.4.
4.4.
4. SCAN Button
SCAN Button SCAN Button
SCAN Button
SCAN Button
o Press the SCAN button to playback the first 10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track. 5.5.
5.5.
5. REPEAT Button
REPEAT Button REPEAT Button
REPEAT Button
REPEAT Button
o To repeat the music you are listening to, press the RPT button. To cancel , pressagain.
o If you do not release RPT operation, when the track ends, it will automatically be re-played.This process will be continued until youpush the button again.
6.6.
6.6.
6.
EJECT Button
EJECT Button EJECT Button
EJECT Button
EJECT Button
When the EJECT button is pressed with theCD loaded, the CD is ejected. NOTE:
o To assure proper operation of the unit, keep the vehicle interior temperature within a normal range by using thevehicle's air conditioning or heating sys-tem.
o When replacing the fuse, replace it with a fuse having the correct capacity.
o The preset station frequencies are all erased when the car battery is discon-nected. Therefore, all data will have to beset again if this should occur.
o Do not add any oil to the rotating parts. Keep magnets, screwdrivers and othermetallic objects away from the tapemechanism and head.
o This equipment is designed to be used only in a 12 volt DC battery system withnegative ground. o This unit is made of precision parts. Do
not attempt to disassemble or adjust anyparts.
o When driving your vehicle, be sure to keep the volume of the unit set lowenough to allow you to hear sounds com-ing from the outside.
o Do not expose this equipment (including the speakers) to water or excessive mois-ture.

2-47
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
B260F01P-AAT
o To use the CD auto changer.
1. Open the sliding lid of the CD auto chang- er.
2. To eject the compact disc magazine, press the EJECT button located inside the CD auto changer.
3. Insert the discs into the magazine.
4. Push the magazine into the CD auto changer and close the sliding lid.
o The CD auto changer can be used when the ignition switch is in either the "ON" or "ACC" position.
1. CD Select Button
1. CD Select Button 1. CD Select Button
1. CD Select Button
1. CD Select Button
When the CD changer magazine contains discs,
press the "CD" button and the CD changer canbe used even if the radio is being used. TheHyundai CD changer can hold up to eight discs.The disc number will be lit, and the track num-ber, and elapsed time will be displayed.
2. DISC Select Button
2. DISC Select Button 2. DISC Select Button
2. DISC Select Button
2. DISC Select Button
To select the CD you want, push " " to
change the disc number. 3. TRACK UP/DOWN
3. TRACK UP/DOWN 3. TRACK UP/DOWN
3. TRACK UP/DOWN
3. TRACK UP/DOWN
o The desired track on the disc currently be-
ing played can be selected using the track number.
o Press once to skip forward to the begin- ning of the next track. Press once to skipback to the beginning of the track.
4. FF/REW ( / )
4. FF/REW ( / ) 4. FF/REW ( / )
4. FF/REW ( / )
4. FF/REW ( / )
If you want to fast forward or reverse through
the compact disc track, push and hold in the FF( ) or REW ( ) button.
When you release the button, the compact disc
player will resume playing.
5. REPEAT
5. REPEAT 5. REPEAT
5. REPEAT
5. REPEAT
o To repeat the music you are listening to,
press the RPT button. To cancel , press again.
o If you do not release RPT operation when the track ends, it will automatically be re-played. This process will be continued until you push the button again.
6. SCAN Button
6. SCAN Button 6. SCAN Button
6. SCAN Button
6. SCAN Button
o Press the SCAN button to playback the first
10 seconds of each track.
o Press the SCAN button again within 10 sec. for the desired track. NOTE:
o When replacing the fuse, replace it with a fuse having the correct capacity.
o This equipment is designed to be used only in a 12 volt DC battery system with negative ground.
o This unit is made of precision parts. Do not attempt to disassemble or adjust anyparts.
o When driving your vehicle, be sure to keep the volume of the unit set lowenough to allow you to hear sounds com-ing from the outside.
TUNEDISC