1-19
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
BEFORE DRIVING YOUR VEHICLE
B290A01P-GATSECOND SEAT (Minibus)
SECOND SEAT (Minibus) SECOND SEAT (Minibus)
SECOND SEAT (Minibus)
SECOND SEAT (Minibus)
Adjusting Seat Forward and Rearward
Adjusting Seat Forward and Rearward Adjusting Seat Forward and Rearward
Adjusting Seat Forward and Rearward
Adjusting Seat Forward and Rearward
B290A01P-GAG
Pull the lever up and hold it while you slide the seat forward or backward to desired position.Release the lever to lock the seat in position. B290B01P-GAT
To rotate (Second seats: type 1)
To rotate (Second seats: type 1) To rotate (Second seats: type 1)
To rotate (Second seats: type 1)
To rotate (Second seats: type 1)
B290B01P-GAG
(a)
(b)
B270A01P-GAT
SEAT WARMER (Driver's seat only)
SEAT WARMER (Driver's seat only) SEAT WARMER (Driver's seat only)
SEAT WARMER (Driver's seat only)
SEAT WARMER (Driver's seat only)
(Minibus)
(Minibus) (Minibus)
(Minibus)
(Minibus)
(If installed)
(If installed) (If installed)
(If installed)
(If installed)
B270A01P-GAG
The seat warmer is provided to warm the front
seats during cold weather. With the ignition key in the "ON" position, push the switch to warmthe driver's seat.
During mild weather or under conditions where
the operation of the seat warmer is not needed,keep the switch in the "OFF" position. To increase the amount of lumbar support, turn
the handle forward. To decrease it turn thehandle toward the rear.
1. Minimum support
2. Maximum support
B260B01P
1 2
The seat belt cannot provide full protection
The seat belt cannot provide full protection The seat belt cannot provide full protection
The seat belt cannot provide full protection
The seat belt cannot provide full protection
to an occupant
to an occupant to an occupant
to an occupant
to an occupant if the seat back is reclined.
if the seat back is reclined. if the seat back is reclined.
if the seat back is reclined.
if the seat back is reclined.
B260A01P-GAT LUMBAR SUPPORT CONTROL
LUMBAR SUPPORT CONTROL LUMBAR SUPPORT CONTROL
LUMBAR SUPPORT CONTROL
LUMBAR SUPPORT CONTROL
(Driver's seat only) (If installed)
(Driver's seat only) (If installed) (Driver's seat only) (If installed)
(Driver's seat only) (If installed)
(Driver's seat only) (If installed)
B260A01P-GAG
1
2
Minibus, Van
Truck
2-11
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
INSTRUMENTS & CONTROLS
C150A01P-GATTURN SIGNAL SWITCH
TURN SIGNAL SWITCH TURN SIGNAL SWITCH
TURN SIGNAL SWITCH
TURN SIGNAL SWITCH
C140A01P-GAT
MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH
MULTI-FUNCTION LIGHT SWITCH
Pulling down on the lever causes the turn
signals on the left side of the car to blink. Pushing upward on the lever causes the turnsignals on the right side of the car to blink. Asthe turn is completed, the lever will automati-cally return to the center position and turn offthe turn signals at the same time. If either turnsignal indicator light blinks more rapidly thanusual, goes on but does not blink, or does notgo on at all, there is a malfunction in thesystem. Check for a burned-out fuse or bulb orsee your Hyundai dealer.
Rotate the switch to turn on the lights.
1. Lights off
2. Position, tail, licence-plate, and instrument panel lamps on
3. Headlights on To operate the headlights, turn the barrel onthe end of the multifunction switch.
Parking light auto cut (If installed)
Parking light auto cut (If installed) Parking light auto cut (If installed)
Parking light auto cut (If installed)
Parking light auto cut (If installed)
If you do not turn the parking lights "OFF" after
driving, the parking light will automatically shut"OFF" when the driver's door is opened.
To turn them "ON" again you must simply turn
the ignition key to the "ON" position. C160A01P-GAT
HIGH-BEAM SWITCH
HIGH-BEAM SWITCH HIGH-BEAM SWITCH
HIGH-BEAM SWITCH
HIGH-BEAM SWITCH
To turn on the headlight high beams, push the
lever forward (away from you). The High BeamIndicator Light will come on at the same time.For low beams, pull the lever back toward you.
C170A01P-GATPASSING SWITCH
PASSING SWITCH PASSING SWITCH
PASSING SWITCH
PASSING SWITCH
HSR2114HSR2113HSR2112
1 2
3
HSR2115
APPEARANCE CARE
APPEARANCE CARE APPEARANCE CARE
APPEARANCE CARE
APPEARANCE CARE
5-2 Have the underbody checked regularly (au-
tumn and spring) and have additional protec- tion treatment carried out as required. As not allof the commercially available materials aresuitable for use on your vehicle, it is recom-mended that you have this work done at anauthorized HYUNDAI dealer.
When washing the vehicle, especially in winter,
spray the underbody with water to remove dirtand dust which might contain salts, road chemi-cals, etc. Clean the carpeting with a vacuum cleaner andremove any stains with carpet cleaner.Oil and grease can be removed by lightlydabbing with a clean colorfast cloth and ben-zene or spot remover.
F010O01P-GAT
Load weight and driving speed
Load weight and driving speed Load weight and driving speed
Load weight and driving speed
Load weight and driving speed
Remove any luggage, etc., which is not neces-sary from the vehicle. The load weight placedon the roof or towed in a trailer also should notbe excessive. Correctly adjusting the air pressure of the tires before driving under maximum load weight con-ditions and before driving long distances isespecially important. F010P01P-GAT
Tire replacement
Tire replacement Tire replacement
Tire replacement
Tire replacement
Tires which do not meet the size specifications must not be used. Replacement of the tiresmust be made as a set of the two front tires, thetwo rear tires, or all four tires. A mixture of bias-ply tires and radial tires must not be used. Consult an authorized HYUNDAIdealer regarding tire replacement. F010Q01P-GAT
Kerb parking
Kerb parking Kerb parking
Kerb parking
Kerb parking
If the tires strike a kerb or concrete parking barrier, they could be damaged, and this dam-age could become a source of extreme dangerwhen the vehicle is subsequently driven at highspeed. If the vehicle is to be driven or onto akerb or any other such barrier, it should bedriven slowly and at an appropriate angle to thekerb or barrier.
F010J01P-GAT
Engine compartment
Engine compartment Engine compartment
Engine compartment
Engine compartment
Clean the engine compartment at the beginning
and end of winter. Pay particualr attention toflanges, crevices, and peripheral parts wheredust containing road chemicals and other cor-rosive materials might collect.
If salt and other chemicals are used on the
roads in your area, clean the engine compart-ment at least every three months.
F010K01P-GATUpholstery and Interior
Upholstery and Interior Upholstery and Interior
Upholstery and Interior
Upholstery and Interior
To maintain the value of your new vehicle,
handle the upholstery carefully and keep theinterior clean.
Use a vacuum cleaner and brush to clean the
seats. If stained, vinyl and synthetic leathershould be cleaned with an appropriate cleaner,and cloth fabrics can be cleaned with eitherupholstery cleaner or a 3% solution of neutraldetergent in lukewarm water. F010L01P-GAT
Damaged paint
Damaged paint Damaged paint
Damaged paint
Damaged paint
Small cracks and scratches in the paint coatshould be touched up as soon as possible withHYUNDAI paint pencil or spray paint to preventcorrosion. Check body areas facing the road orthe tires especially carefully for damage to thepaint coat caused by flying stones, etc. Thepaint code number for your vehicle can befound on the vehicle information code plate.
F010M01P-GATTarTar
TarTar
Tar
If tar becomes adhered to the vehicle, usespecial tar remover to remove it as soon aspossible. If the tar leaves a stain, polish theaffected area. F010N01P-GAT
Plastic and rubber parts
Plastic and rubber parts Plastic and rubber parts
Plastic and rubber parts
Plastic and rubber parts
Use a soft cloth and wash with water. If neces- sary, a cleaning agent specially designed forplastics can be used. If engine oil, brake fluid,battery fluid, etc., comes in contact with theseparts, wash promptly with water and then usealcohol to remove the stain completely.