YOUR 307 IN DETAIL77
The most recent destinations are
shown.
There are three possible methods of
defining the location to which you
wish to travel:
accept the last details input by means of the "OK"function,
input the details of your destina tion,
automatically input the details of your current location by means of
the "Current location" function.
GPS details
The last address entered is displayed.
There are three options for defining
the location in which you wish to
obtain this service:
accept the last address entered
using the "OK"function,
fill in the "Town" and "Street"
zones,
automatically enter the name of your current location using the
"Current location" function.
Selecting a service.
If you wish to be directed to a ser
vice, select the
categorycorre
sponding to the service , then confirm
by pressing the dial.
The list of services corresponding to
the category selected is displayed.
Select the servicethen confirm by
pressing the dial to access the
"Place choice" function.
An indication on the edge of the
screen (x/n) shows you the maxi
mum number of establishments pro
viding the same service within a
radius of 30 miles (50 km), as the
crow flies, from the selected location.
Use buttons "<"and ">"to consult
the list provided.
When the establishment of your
choice is displayed, you can:
selelct the "OK"function to acti
vate guidance towards this service,
se lect the "Archive" function to enter
this establishment in your directory.
Note:
if the service selected is not
available in the programmed loca
tion, a temporary message informs
you of this.
Following validation of the location,
the service closest to it is displayed.
The distance indicated is the dis
tance as the crow flies from the ser
vice to the selected location.
09-09-2002
YOUR 307 IN DETAIL89
Manual operation
If you wish, you can make a different
choice from that offered by the sys
tem by changing a setting. The other
functions will still be controlled auto
matically. Pressing the "AUTO" but
ton returns the system to completely
automatic operation.
4. Air conditioning
Press this button to switch
off the air conditioning. The
symbol "ECO" is displayed.
Automatic operation of the
air conditioning is resumed
when the button is pressed again.
The symbol "A/C" is displayed.
Note
It is quite normal that the condensa
tion created by the air conditioning
results in a flow of water under the
vehicle when it is stationary.
5. Air distribution
Pressing this button several
times in succession
enables the air flow to be
directed in turn towards:
– the windscreen (de icing or demist ing), – the windscreen and the footwells,
– the footwells,
– the centre and side vents and the
footwells,
– the centre and side vents.
6. Air flow
The flow of air can be
increased or reduced
by pressing buttons +
or – respectively.
7. Air intake Press this button for recir
culation of the interior air.
Recirculation, shown on
the display, enables the
passenger compartment to be insu
lated from exterior odours and
smoke.
Avoid prolonged recirculation of inte
rior air. To do this, press the button
again to resume intake of exterior air. 8. Switching the system off
The "OFF" button enables
the entire system to be
switched off.
9. Demisting the rear screen and the mirrors
Press this button to demist
the rear screen and the mir
rors. Demisting switches
off automatically. It is possi
ble to stop operation of the
demisting before it is switched off
automatically by pressing the button
again.
Important precaution
Operate the air conditioning for 5 to
10 minutes, once or twice a month,
to keep it in good working order.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Note : to optimise the operation of the
air conditioning, leave the vents
open.
09-09-2002
