2001 NISSAN ALMERA TINO wiring diagram

Fig. 4NLEL0504S1304
YEL458C
POWER DOOR LOCK
Wiring Diagram Ð D/LOCK Ð/LHD Models (Cont'd)
EL-269

Fig. 5NLEL0504S1305
YEL459C
POWER DOOR LOCK
Wiring Diagram Ð D/LOCK Ð/LHD Models (Cont'd)
EL-270

Fig. 6NLEL0504S1306
YEL460C
POWER DOOR LOCK
Wiring Diagram Ð D/LOCK Ð/LHD Models (Cont'd)
EL-271

DOOR LOCK/UNLOCK SWITCH CHECK=NLEL0505S04
1 CHECK DOOR LOCK/UNLOCK SWITCH INPUT SIGNAL
1. Disconnect time control unit harness connector.
2. Check continuity between time control unit harness connector terminal 37 or 38 and ground.
NEL674
Refer to wiring diagram.
OK or NG
OK©Door lock/unlock switch is OK.
NG©GO TO 2.
2 CHECK DOOR LOCK/UNLOCK SWITCH
1. Disconnect door lock/unlock switch harness connector.
2. Check continuity between each door lock/unlock switch terminals.
+Power window main switch (Door lock/unlock switch)
NEL675
OK or NG
OK©Check the following.
+Ground circuit for door lock/unlock switch
+Harness for open or short between door lock/unlock switch and time control unit con-
nector
NG©Replace door lock/unlock switch.
POWER DOOR LOCK
Trouble Diagnoses/LHD Models (Cont'd)
EL-274

DOOR KEY CYLINDER SWITCH CHECKNLEL0505S05
1 CHECK DOOR KEY CYLINDER SWITCH INPUT SIGNAL (LOCK/UNLOCK SIGNAL)
Check voltage between time control unit harness connector terminals 28 or 29 and ground.
NEL676
Refer to wiring diagram.
OK or NG
OK©Door key cylinder switch is OK.
NG©GO TO 2.
2 CHECK DOOR KEY CYLINDER SWITCH
1. Disconnect door key cylinder switch harness connector.
2. Check continuity between door key cylinder switch terminals.
NEL677
OK or NG
OK©Check the following.
+Door key cylinder switch ground circuit
+Harness for open or short between time control unit and door key cylinder switch
NG©Replace door key cylinder switch.
POWER DOOR LOCK
Trouble Diagnoses/LHD Models (Cont'd)
EL-275

DOOR LOCK ACTUATOR CHECKNLEL0505S06
1 CHECK DOOR LOCK ACTUATOR OUTPUT SIGNAL
Check voltage for door lock actuator.
+Door lock actuator driver's side
NEL678
+Door lock actuator passenger side and rear
NEL679
Refer to wiring diagram.
OK or NG
OK©GO TO 2.
NG©Replace time control unit. (Before replacing the control unit, perform ªDOOR LOCK/
UNLOCK SWITCH CHECKº.)
POWER DOOR LOCK
Trouble Diagnoses/LHD Models (Cont'd)
EL-276

2 CHECK DOOR LOCK ACTUATOR
1. Disconnect door lock actuator harness connector.
2. Apply 12V direct current to door lock actuator and check operation.
+Front and rear door
NEL680
+Back door
NEL681
OK or NG
OK©Check harness for open or short between time control unit connector and door lock
actuator.
NG©Replace door lock actuator.
DOOR SWITCH CHECKNLEL0505S08
1 CHECK DOOR SWITCH INPUT SIGNAL
Check voltage between time control unit harness connector terminals 6 and ground.
NEL647
Refer to wiring diagram.
OK or NG
OK©Door switch is OK.
NG©GO TO 2.
POWER DOOR LOCK
Trouble Diagnoses/LHD Models (Cont'd)
EL-277

2 CHECK DOOR SWITCH
1. Disconnect door switch harness connector.
2. Check continuity between door switch terminals.
NEL648
OK or NG
OK©Check the following.
+Door switch ground circuit or door switch ground condition
+Harness for open or short between smart entrance control unit and door switch
NG©Replace door switch.
DOOR UNLOCK SENSOR CHECKNLEL0505S09
1 CHECK DOOR UNLOCK SENSOR INPUT SIGNAL
Check voltage between time control unit terminal 35 or 36 and ground.
NEL682
Refer to wiring diagram.
OK or NG
OK©Door unlock sensor is OK.
NG©GO TO 2.
POWER DOOR LOCK
Trouble Diagnoses/LHD Models (Cont'd)
EL-278