2000 TOYOTA CAMRY headrest

BO0MZ±01
H01869

Hog RingSeatback PadHeadrest
Seatback Cover
Headrest Support
Seat Cushion Cover
Seatback Frame
w/ Side Airbag:
Side Airbag
Assembly
Seat Cushion
Inner Shield
w/ Lumber Support:
Lumper Support Lever

Hog Ring
Seat Cushion
Pad
Seat Cushion
Frame
Seat Track Adjusting
HandleFront Seat Inner Upper Track
18 (185, 13)
37 (375, 27)
Seat Track Cover
18 (185, 13)
Front Seat
Inner Track
37 (375, 27)
Front Seat Cushion
Shield
Release
Handle
Front Seat Cushion
Lower Shield
Vertical Adjuster
Knob w/o Vertical:
Front Seat Inner Upper Track
18 (185, 13)
18 (185, 13)
Front Seat
Inner Track37 (375, 27)
37 (375, 27)
Front Seat Outer
Adjuster
Front Seat Cushion
Shield
Release
Handle
N´m (kgf´cm, ft´lbf)
Front Seat Cushion Lower Shield
: Specified torque

Non±reusable part
37 (375, 27)
6.0 (61, 53 in.´lbf)
18 (185, 13)
± BODYFRONT SEAT (Manual Seat for TMC Made)
BO±99
2447 Author: Date:
FRONT SEAT (Manual Seat for TMC Made)
COMPONENTS

BO0N1±01
H01870
± BODYFRONT SEAT (Manual Seat for TMC Made)
BO±101
2449 Author: Date:
DISASSEMBLY
1. REMOVE THESE PARTS:
(a) Release handle
(b) Front seat cushion shield
(c) Vertical Seat Adjuster:
Vertical adjuster knob
(d) Front seat cushion lower shield
(e) Seat cushion inner shield
(f) w/ Lumber Support:
Lumber support lever
(g) Headrest
(h) Front seat inner belt
2. REMOVE SEATBACK ASSEMBLY
(a) w/ Side Airbag Assembly:
Remove the side airbag wire harness after removing
clips.
(b) Remove the bolts and seatback assembly.
3. REMOVE SEATBACK COVER
(a) Remove the hog rings.
(b) w/ Side Airbag Assembly:
Remove the hook from the seatback frame.
(c) Remove the headrest supports.
(d) Remove the seatback frame from the seatback cover with
pad.
(e) Remove the seatback cover from the seatback pad.
4. w/ Side Airbag Assembly:
REMOVE SIDE AIRBAG ASSEMBLY
Remove the 1 clip of side airbag wire harness, 2 nuts and side
airbag assembly from the seatback frame.
CAUTION:

Do not store the side airbag assembly with the airbag
deployment direction facing down.

Never disassemble the side airbag assembly.
5. REMOVE SEAT CUSHION ASSEMBLY
Remove the 4 bolts and seat cushion assembly from the seat
adjuster.
6. REMOVE SEAT CUSHION COVER
(a) Remove the seat cushion frame.
(b) Remove the seat cushion cover from the seat cushion
pad.
7. REMOVE SEAT TRACK ADJUSTING HANDLE
Remove the seat track handle.
8. REMOVE FRONT SEAT OUTER ADJUSTER
Remove the E ring and front seat outer adjuster from the front
seat inner truck with upper track.

BO0N3±01
± BODYFRONT SEAT (Manual Seat for TMC Made)
BO±103
2451 Author: Date:
REASSEMBLY
1. Vertical Seat Adjuster:
INSTALL FRONT SEAT OUTER ADJUSTER
Install front seat outer adjuster to front seat inner adjuster with
E ring, nuts and bolts.
2. w/o Vertical Seat Adjuster:
INSTALL FRONT SEAT OUTER AND INNER AD-
JUSTER
Install the adjusters to the seat cushion frame.
3. INSTALL SEAT TRACK ADJUSTING HANDLE
Install the seat track adjusting handle.
4. Vertical Seat Adjuster:
INSTALL SEAT CUSHION COVER
(a) Install the seat cushion cover to seat cushion pad.
(b) Install the seat cushion cover with pad to the seat cushion
frame.
5. INSTALL SEAT CUSHION ASSEMBLY
Install the seat cushion assembly with 4 bolts to the seat adjust-
er.
HINT:
Tighten the 4 bolts temporarily, then from the bolts on the rear
side tighten completely.
Torque: 18 N´m (185 kgf´cm, 13 ft´lbf)
6. w/ Side Airbag Assembly:
INSTALL SIDE AIRBAG ASSEMBLY
Install the side airbag assembly with new 2 nuts to the seatback
frame.
Torque: 6.0 N´m (61 kgf´cm, 53 in.´lbf)
NOTICE:

Make sure that the side airbag assembly is installed
to the specified torque.

If the side airbag assembly has been dropped, or
there are cracks, dents or other defects in the case or
connector, replace the side airbag assembly with a
new one.

When installing the side airbag assembly, take care
is not pinched between other parts.
7. INSTALL SEATBACK COVER
(a) Install the seatback cover to the seatback pad.
(b) Install the seatback cover with pad to the seatback frame.
(c) Install the headrest supports.

H01870
BO±104
± BODYFRONT SEAT (Manual Seat for TMC Made)
2452 Author: Date:
(d) w/ Side Airbag Assembly:
Hang the hook on to the seatback frame.
CAUTION:
Take care to hung the hook securely. Otherwise the seat
cover slides, it might cause incorrect deploying.
8. INSTALL SEATBACK ASSEMBLY
(a) Install the seatback assembly with bolts.
Torque: 18 N´m (185 kgf´cm, 13 ft´lbf)
(b) Install new hog rings.
HINT:
Install the hog rings to prevent wrinkles as least as possible.
(c) w/ Side Airbag Assembly:
Securely fix the side airbag wire harness to seat cushion
and seatback by clips.
9. INSTALL THESE PARTS:
(a) Front seat inner belt
(b) Headrest
(c) Lumber support lever
(d) Seat cushion inner shield
(e) Front seat cushion shield
(f) Vertical Seat Adjuster:
Vertical adjuster knob
(g) Front seat cushion lower shield
(h) Release handle

BO0MO±01
H01872

Hog Ring
Front Seatback Cover
Front Seatback Pad
Headrest
Headrest
Support

Hog Ring
Front Seatback
Hinge Cover
Front Seatback
Frame
w/ Lumber Support:
Lumber Support Lever
Front Seat Cushion Cover
Front Seat
Cushion Pad
Front Seat Cushion Frame
Inner Adjuster
Sub±Assembly
Track Cover
Seat Track
Adjusting HandleOuter Adjuster
Sub±Assembly
Front Seat Cushion
Shield
Release
Handle
Front Seat Cushion
Lower Shield
Vertical Adjuster Knob
w/ Side Airbag Assembly:
Side Airbag
Assembly
6.0 (61, 53 in.´lbf)
w/o Vertical:
Inner Adjuster
Sub±Assembly
Outer Adjuster
Sub±Assembly
Front Seat Cushion
Shield
Front Seat Cushion
Lower Shield
Release Handle
N´m (kgf´cm, ft´lbf) : Specified torque

Non±reusable part
BO±106
± BODYFRONT SEAT (Manual Seat for TMMK Made)
2454 Author: Date:
FRONT SEAT (Manual Seat for TMMK Made)
COMPONENTS

BO0MQ±01
H01870
BO±108
± BODYFRONT SEAT (Manual Seat for TMMK Made)
2456 Author: Date:
DISASSEMBLY
1. REMOVE THESE PARTS:
(a) Release handle
(b) Front seat cushion shield
(c) Vertical Seat Adjuster:
Vertical adjuster knob
(d) Front seat cushion lower shield
(e) Front seatback hinge cover.
(f) w/ Lumber Support:
Lumber support lever
(g) Headrest
(h) Front seat inner belt
2. REMOVE SEATBACK ASSEMBLY
(a) w/ Side Airbag Assembly:
Remove the side airbag wire harness after removing
clips.
(b) Remove the hog rings.
(c) Remove the bolts and seatback assembly.
3. REMOVE SEATBACK COVER
(a) w/ Side Airbag Assembly:
Remove the hook from the seatback frame.
(b) Remove the headrest supports.
(c) Remove the seatback frame from the seatback cover with
pad.
(d) Remove the seatback cover from the seatback pad.
4. w/ Side Airbag Assembly:
REMOVE SIDE AIRBAG ASSEMBLY
Remove the 2 nuts and side airbag assembly from the seatback
frame.
CAUTION:

Do not store the side airbag assembly with the airbag
deployment direction facing down.

Never disassemble the side airbag assembly.
5. REMOVE SEAT CUSHION ASSEMBLY
Remove the 4 bolts and seat cushion assembly from the seat
adjuster.
6. REMOVE SEAT CUSHION COVER
(a) Remove the seat cushion frame.
(b) Remove the seat cushion cover from the seat cushion
pad.
7. REMOVE RECLINING CONNECTING PIPE
Remove the reclining connecting pipe.
8. REMOVE SEAT TRACK ADJUSTING HANDLE
Remove the seat track adjusting handle.
9. REMOVE OUTER ADJUSTER SUB±ASSEMBLY
Remove the outer adjuster sub±assembly from the inner ad-
juster sub±assembly.

BO0MS±01
BO±110
± BODYFRONT SEAT (Manual Seat for TMMK Made)
2458 Author: Date:
REASSEMBLY
1. INSTALL OUTER ADJUSTER SUB±ASSEMBLY
Install the outer adjuster sub±assembly to the inner adjuster
sub±assembly.
2. INSTALL SEAT ADJUSTING HANDLE
Install the seat track adjusting handle.
3. INSTALL RECLINING CONNECTING PIPE
(a) Adjust the reclining lock positions of the seat adjusters.
(b) Slide the seat adjusters to the most front position.
(c) Place the adjusters on a spacer to adjust the seat rails in
parallel and install the connecting pipe.
HINT:
When installing the connecting pipe with raising up the adjust-
ers, the lock positions adjusted in 3±(a) step slip off, lock error
will occur.
4. INSTALL SEAT CUSHION COVER
(a) Install the seat cushion cover to seat cushion pad.
(b) Install the seat cushion cover with pad to the seat cushion
frame.
5. INSTALL SEAT CUSHION ASSEMBLY
Install the seat cushion assembly with 4 bolts to the seat adjust-
er.
HINT:
Tighten the 4 bolts temporarily, then from the bolts on the rear
side tighten completely.
6. w/ Side Airbag Assembly:
INSTALL SIDE AIRBAG ASSEMBLY
Install the side airbag assembly with 2 nuts to the seatback
frame.
Torque: 6.0 N´m (61 kgf´cm, 53 in.´lbf)
NOTICE:

Make sure that the side airbag assembly is installed
to the specified torque.

If the side airbag assembly has been dropped, or
there are cracks, dents or other defects in the case or
connector, replace the side airbag assembly with a
new one.

When installing the side airbag assembly, take care
is not pinched between other parts.
7. INSTALL SEATBACK COVER
(a) Install the seatback cover to the seatback pad.
(b) Install the seatback cover with pad to the seatback frame.
(c) Install the headrest supports.

H01870
H01871
± BODYFRONT SEAT (Manual Seat for TMMK Made)
BO±111
2459 Author: Date:
(d) w/ Side Airbag Assembly:
Hang the hook on to the seatback frame.
CAUTION:
Take care to hung the hook securely. Otherwise the seat
cover slides, it might cause incorrect deploying.
8. INSTALL SEATBACK ASSEMBLY
(a) Install the seatback assembly with 4 bolts.
HINT:
Tighten the 4 bolts temporarily, then from the bolt on the front
right side tighten completely.
(b) Install a new hog rings.
HINT:
Install the hog rings to prevent wrinkles as least as possible.
(c) w/ Side Airbag Assembly:
Securely fix the side airbag wire harness to seat cushion
by clips.
9. INSTALL THESE PARTS:
(a) Front seat inner belt
(b) Headrest
(c) w/ Lumber Support:
Lumber support lever
(d) Front seatback hinge cover
(e) Front seat cushion lower shield
(f) Vertical Seat Adjuster:
Vertical adjuster knob
(g) Front seat cushion shield
(h) Release handle