2000 RENAULT SCENIC Technical Note 3426A Workshop Manual

Downloaded from www.Manualslib.com manuals search engine VALUES AND SETTINGS
Tyres and wheels
07
07-6
Tyres and wheels
(1) With full load and on motorways.
Tightening torque for wheel nuts: 9 daN.m
Rim run-out: 1.2 mm Type Rim TyresTyre pressure when
cold (in bar) (1)
Front Rear
BA05 6 J 15 185/60 R 15 2.4 2.2
JA05 6 J 15 185/60 R 15 2.3 2.3

Downloaded from www.Manualslib.com manuals search engine VALUES AND SETTINGS
Brakes
07
07-7
Brakes
(1) Drum: maximum wear diameter
Max. disc run-out: 0.07 mm
(1) Leading brake shoe.
(2) Trailing brake shoe.Typeat the front at the rear
Disc thickness (in mm) Disc thickness (in mm) Drum diameter (in mm)
Max. Min. Max. Min. Min. Max. (1)
BA05 20.6 17.6 - - 203.2 204.45
JA05 24 21 11 9.5 - -
TypeLining thicknesses (in mm) (including backing)
Brake fluid Front Rear
New
Min.New
Min.
JA05 18 6 11 5 SAE J1703
DOT 4
BA05 18 6 4.9 (1)
3.4 (2)2 SAE J1703
DOT 4

Downloaded from www.Manualslib.com manuals search engine VALUES AND SETTINGS
Brake compensator
07
07-8
Brake compensator
BRAKING PRESSURE
Conditions:
– Full fuel tank,
– Driver on board.
(1) The test is performed using two pressure gauges in an X arrangement.TypeCheck pressure (1) (in bars)
Front Rear
B0A5 140
+18 52 0
JA05 140 +18 32 0

Downloaded from www.Manualslib.com manuals search engine VALUES AND SETTINGS
Underbody height
07
07-9
Underbody height
The difference between the right-hand side and the left-hand side of the same axle of a vehicle must not exceed
5 mm, the driver's side always being higher.
Any alteration to the underbody height also requires adjustment of the brake compensator and of the headlights.Typeat the front
H1 - H2 = ... mm
± 7.5 mmat the rear
H4 - H5 = ... mm
± 7.5 mmDimension X (mm)
D and G
± 0.5 mm
BA05 104 22 496
JA05 102 27 512
98336R

Downloaded from www.Manualslib.com manuals search engine VALUES AND SETTINGS
Underbody height
07
07-10
MEASUREMENT POINTS
Dimension H5 is measured from the axis of the
suspension bar.
99656R1
88636-4R

Downloaded from www.Manualslib.com manuals search engine VALUES AND SETTINGS
Front axle angle checking values
07
07-11
Front axle angle checking values
B0A5
ANGLES VALUESPOSITION OF
FRONT AXLEADJUSTMENT
CASTOR
3˚22'
3˚52' ± 30'
4˚22'
Max. right/left
difference = 1˚


H5 - H2 = 89 mm
H5 - H2 = 69 mm
H5 - H2 = 49 mmNOT
ADJUSTABLE
CAMBER
- 0˚23'
- 0˚29' ± 30'
- 0˚38'
Max. right/left
difference = 1˚


H1 - H2 = 104 mm
H1 - H2 = 115 mm
H1 - H2 = 125 mmNOT
ADJUSTABLE
PIVOT
13˚25'
13˚40' ± 30'
13˚52'
Max. right/left
difference = 1˚


H1 - H2 = 104 mm
H1 - H2 = 115 mm
H1 - H2 = 125 mmNOT
ADJUSTABLE
PARALLELISM
(for 2 wheels)
toe-out
+ 0˚10' ± 10'
+ 1 mm ± 1 mmUNLADENAdjustable by
rotating track rod
sleeves
1 turn= 30'
(3 mm)
POSITION FOR TIGHTENING RUBBER
BUSHES
- UNLADEN -

Downloaded from www.Manualslib.com manuals search engine VALUES AND SETTINGS
Front axle angle checking values
07
07-12
J0A5
ANGLES VALUESPOSITION OF
FRONT AXLEADJUSTMENT
CASTOR
5˚00'
3˚54' ± 30'
3˚19'
Max. right/left
difference = 1˚


H5 - H2 = 23 mm
H5 - H2 = 65 mm
H5 - H2 = 75 mmNOT
ADJUSTABLE
CAMBER
- 0˚15'
- 0˚28' ± 30'
- 0˚37'
Max. right/left
difference = 1˚


H1 - H2 = 90 mm
H1 - H2 = 112 mm
H1 - H2 = 120 mmNOT
ADJUSTABLE
PIVOT
13˚14'
13˚32' ± 30'
13˚55'
Max. right/left
difference = 1˚


H1 - H2 = 90 mm
H1 - H2 = 112 mm
H1 - H2 = 120 mmNOT
ADJUSTABLE
PARALLELISM
(for 2 wheels)
toe-out
+ 0˚10' ± 10'
+ 1 mm ± 1 mmUNLADENAdjustable by
rotating track rod
sleeves 1 turn=
30' (3 mm)
POSITION FOR TIGHTENING RUBBER
BUSHES
- UNLADEN -

Downloaded from www.Manualslib.com manuals search engine VALUES AND SETTINGS
Rear axle angles checking values
07
07-13
Rear axle angles checking values
ANGLES VALUESPOSITION OF
REAR AXLEADJUSTMENT
CAMBER
- 0˚50' ± 15'
- 1˚15' ± 15'UNLADENNOT
ADJUSTABLE
PARALLELISM
(for 2 wheels)
toe-in
- 0˚30' ± 20'
- 3 mm ± 2 mm
- 0˚15' ± 20'
- 1.5 mm ± 2 mmUNLADENNOT
ADJUSTABLE
POSITION FOR TIGHTENING RUBBER
BUSHES
- UNLADEN -