Downloaded from www.Manualslib.com manuals search engine How to Check Lubricant
If the level is below the bottom of the filler plug hole,
you’ll need to add some lubricant. Add enough lubricant
to raise
the level to the bottom of the filler plug hole.
What to Use
To add lubricant when the level is low, use Axle
Lubricant (GM Part
No. 12345977) or SAE 8OW-90
GL-5 gear lubricant. To completely refill after draining,
add
4 ounces (1 18 ml) of Limited-Slip Differential
Lubricant Additive (GM Part
No. 1052358). Then fill to the bottom
of the filler plug hole with Axle Lubricant
(GM Part No. 12345977) or SAE 8OW-90 GL-5
gear lubricant.
Engine Coolant
The cooling s stem in your vehicle is filled with
DEX-COOL engine coolant. This coolant is designed
to remain in your vehicle for
5 years or 150,000 miles
(240 000 km) whichever occurs first, if you add only
DEX-COOL’ extended life coolant.
The following explains your cooling system and how
to add coolant when it is low. If you have a problem
with engine overheating, see “Engine Overheating” in
the Index.
A
50/50 mixture of water and DEX-COOL@
coolant will:
0 Give freezing protection down to -34°F (-37°C).
8
0 Give boiling protection up to 265 “F (129” C).
Protect against rust and corrosion.
0 Help keep the proper engine temperature.
Let the warning lights and gauges work as
they should.
6-22
Downloaded from www.Manualslib.com manuals search engine USAGE
Key Lock
Cylinders
Rear Axle
(Limited-Slip
Differential)
Windshield Washer Solvent
FLUIDLUBRICANT
Multi-Pu ose Lubricant,
Superlube
% (GM Part
No. 12346241 or equivalent).
Axle Lubricant (GM Part
No. 12345977) and 4 ounces
(1 18 ml) of Limited-Slip
Differential Lubricant Additive
(GM Part
No. 1052358 or
equivalent) where required. See “Rear Axle” in the Index.
GM Optikleen@ Washer Solvent
(GM Part
No. 1051515) or
equivalent.
USAGE
Hood Latch
Assembly,
Pivots, Spring
Anchor and
Release Pawl
Hood and Door
Hinges
-
Weatherstrip Conditioning
FLUIDLUBRICANT
Lubriplate Lubricant Aerosol (GM
Part
No. 12346293 or equivalent)
or lubricant meeting requirements
of NLGI
# 2, Category LB or
GC-LB.
Multi-Pu ose Lubricant,
Superlube
% (GM Part
No. 12346241 or equivalent).
Dielectric Silicone Grease (GM
Part
No. 12345579 or equivalent).
7-17
