Page 294 of 1807

BO0R3-01
N09045
Butyl Tape
: 3 Clips
N09040
Outside Garnish Seal BO-38
- BODYQUARTER WINDOW GLASS
2118 Author: Date:
1997 SUPRA (RM502U)
REMOVAL
1. REMOVE THESE PARTS:
(See pages BO-61)
(a) Tonneau cover
(b) Luggage compartment mat
(c) Spare wheel cover
(d) Rear seatback
Torque: 25 N´m (260 kgf´cm, 19 ft´lbf)
(e) Removable roof stay RH and LH (Sport roof)
(f) Deck trim rear cover
(g) Removable roof holder (Sport roof)
(h) Quarter wheel house inner cover
(i) Speaker grille
(j) Deck trim side board
(k) Front door scuff inside plate
(l) Rear quarter trim board
(m) Front seat outer belt shoulder anchor
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(n) Rear seat outer belt floor anchor
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(o) Roof side inner garnish
(p) Rear roof headlining (Sport roof)
2. REMOVE ROOF SIDE RAIL WEATHERSTRIP
(a) Using a clip remover, remove the 3 clips from the rear side
of the weatherstrip.
(b) Remove the rear side of the weatherstrip from the retain-
er.
3. REMOVE ROOF SIDE RAIL WEATHERSTRIP RETAIN-
ER
Remove the outside garnish seal and retainer.
Page 314 of 1807

BO0RF-01
N19535
Sport Roof:
Roof Side Rail Weatherstrip RH
Removable Roof Moulding RH
Removable Roof Headlining
Front Pillar GarnishRear Roof Headlining
Front Roof
Headlining
Assist Grip Removable Roof
Moulding LH Roof Side Rail
Weatherstrip LH Roof Headlining
Visor Holder
Sun VisorInterior LightClip
Front Pillar GarnishRoof Side Inner GarnishCoat Hook
Deck Trim Side BoardTonneau Cover
Tonneau
Cover
Clamp
Deck Trim Rear Cover
Quarter Wheel House Cover
Rear Seat Outer Belt
Speaker Grille Assist GripFront Seat
Outer Belt
Deck Trim
Side Service
Hole Cover
Front Door Scuff Inside Plate
Rear Quarter Trim Board
Rear Seatback
5XLuggage Compartment Mat
Rear Seat Cushion
Spare Wheel Cover
Non-reusable partSport Roof:
Removable Roof StayLower Back Service
Hole Cover
Stay Support Cover
Holder Garnish
Removable Roof Holder
43 (440, 32)
43 (440, 32)
25 (260, 19)
N´m (kgf´cm, ft´lbf) : Specified torqueClip
BO-60
- BODYROOF HEADLINING
2140 Author: Date:
1997 SUPRA (RM502U)
ROOF HEADLINING
COMPONENTS
Page 315 of 1807
BO0RG-01
N08498
N08499
N08501
3 Clips
2 Clips
N08502
- BODYROOF HEADLINING
BO-61
2141 Author: Date:
1997 SUPRA (RM502U)
REMOVAL
1. REMOVE THESE PARTS:
(a) Tonneau cover
(b) Luggage compartment mat
(c) Spare wheel cover
(d) Rear seat cushion
(e) Rear seatback
Torque: 25 N´m (260 kgf´cm, 19 ft´lbf)
(f) Removable roof stay RH and LH (Sport roof)
(g) Deck trim rear cover
(h) Removable roof holder RH and LH (Sport roof)
(i) Quarter wheel house cover
(j) Deck trim side boards
(k) Front door scuff inside plates
(l) Speaker grilles
(m) Rear quarter trim boards
(n) Front seat outer belts
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(o) Rear seat outer belts
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(p) Deck trim side service hole covers
Page 320 of 1807
BO0RT-01
N19399
Rear Seatback
Rear Seat Cushion
Seat Hook
Roof Side Inner GarnishTonneau Cover
Luggage Compartment
Mat
Spare Wheel Cover
Sport Roof:
Holder Garnish
Removable Roof Holder
Tonneau Cover
ClampDeck Trim Side Board
Deck Trim Rear Cover
Rear Quarter
Trim Board Quarter Wheel
House Inner Cover
Quarter Wheel
House Inner
Front Cover
Speaker Grille
Front Door Scuff Inside Plate
Rear Seat Outer BeltSport Roof:
Lower Back
Service Hole Cover
Stay Support
Cover
Rear Seat Inner Belt
Seat Track Cover Front Seat
Outer BeltFront Seat
Front Seat Cushion
Inner Shield
Seat Track CoverFront Seat Inner Belt
43 (440, 32)
7.8 (80, 69 in.´lbf)
43 (440, 32)
43 (440, 32)
43 (440, 32)
43 (440, 32)
43 (440, 32)
43 (440, 32): Specified torqueN´m (kgf´cm, ft´lbf)
- BODYSEAT BELT
BO-67
2147 Author: Date:
1997 SUPRA (RM502U)
SEAT BELT
COMPONENTS
Page 343 of 1807
BR0GZ-01
R07130
R07131
- BRAKEFRONT BRAKE CALIPER (2JZ-GTE)
BR-37
1837 Author: Date:
1997 SUPRA (RM502U)
REMOVAL
1. REMOVE FRONT WHEEL
2. DISCONNECT FLEXIBLE HOSE
(a) Remove the union bolt and 2 gaskets from the caliper,
then disconnect the flexible hose from the caliper.
Torque: 30 N´m (310 kgf´cm, 22 ft´lbf)
HINT:
At the time of installation, please refer to the following item.
Install the flexible hose lock securely in the lock hole in the cali-
per.
(b) Use a container to catch the brake fluid as it drains out.
3. REMOVE CALIPER
Remove the 2 mounting bolts and caliper.
Torque: 118 N´m (1,200 kgf´cm, 87 ft´lbf)
4. REMOVE THESE PARTS
(a) Clip and 2 pins
(b) Anti-rattle spring
(c) 2 pads
(d) 2 pad spacers and anti-squeal shims
Page 350 of 1807
BR0HF-01
R07153
R07154
- BRAKEREAR BRAKE CALIPER (2JZ-GTE)
BR-55
1855 Author: Date:
1997 SUPRA (RM502U)
REMOVAL
1. REMOVE REAR WHEEL
2. DISCONNECT FLEXIBLE HOSE
(a) Remove the union bolt and 2 gaskets from the caliper,
then disconnect the flexible hose from the caliper.
Torque: 30 N´m (310 kgf´cm, 22 ft´lbf)
HINT:
At the time of installation, please refer to the following item.
Install the flexible hose lock securely in the lock hole in the cali-
per.
(b) Use a container to catch the brake fluid.
3. REMOVE CALIPER
Remove the 2 mounting bolts and caliper.
Torque: 104 N´m (1,065 kgf´cm, 77 ft´lbf)
4. REMOVE THESE PARTS
(a) Clip
(b) 2 pins
(c) Anti-rattle spring
(d) 2 pads
(e) 4 anti-squeal shims
Page 354 of 1807

BR0HL-01
R07154
BR5358
Matchmarks
BR5349
BR5331
BR3564
- BRAKEPARKING BRAKE
BR-61
1861 Author: Date:
1997 SUPRA (RM502U)
DISASSEMBLY
1. REMOVE REAR WHEEL
2. REMOVE REAR DISC BRAKE ASSEMBLY
(a) Remove the 2 mounting bolts and remove the disc brake
assembly.
Torque: 104 N´m (1,065 kgf´cm, 77 ft´lbf)
(b) Suspend the disc brake securely and so the hose is not
stretched.
3. REMOVE DISC
(a) Place matchmarks on the disc and rear axle hub.
(b) Remove the disc.
HINT:
If the disc cannot be removed easily, return the shoe ad-
juster until the disc turns freely.
If there are no matchmarks, temporarily install the disc,
then measure the disc runout and install the disc in the
position (See step 4 on page BR-51).
4. REMOVE SHOE RETURN SPRINGS
Using needle-nose pliers, remove the 2 shoe return springs.
5. REMOVE SHOE STRUT WITH SPRING
6. REMOVE FRONT SHOE, ADJUSTER AND TENSION
SPRING
(a) Slide out the front shoe and remove the shoe adjuster.
(b) Disconnect the tension spring and remove the front shoe.
7. REMOVE REAR SHOE
(a) Slide out the rear shoe.
(b) Remove the tension spring from the rear shoe.
(c) Disconnect the parking brake cable from the parking
brake shoe lever.
(d) Remove the shoe hold-down spring cups, springs and
pins.
Page 1316 of 1807

P13212
Z16756
M/T
Matchmarks
Z16731
Hole Plug EM-64
- ENGINE MECHANICAL (2JZ-GTE)ENGINE UNIT
1169 Author: Date:
1997 SUPRA (RM502U)
(c) Lift the engine out of the vehicle slowly and carefully.
NOTICE:
Remove the engine and transmission assembly carefully
without damaging the shift lever retainer (M/T), A/C com-
pressor or PS solenoid valve.
(d) Make sure the engine is clear of all wiring, hoses and
cables.
(e) Place the engine and transmission assembly onto the
stand.
34. A/T:
REMOVE OIL DIPSTICK AND GUIDE FOR
TRANSMISSION
(a) Remove the bolt.
(b) Pull out the dipstick and guide from the transmission.
(c) Remove the O-ring from the dipstick guide.
35. DISCONNECT ENGINE WIRE FROM TRANSMISSION
(a) Disconnect the connectors.
(b) Disconnect the wire clamps from the brackets.
36. REMOVE STARTER
(a) Disconnect the starter connector.
(b) Remove the 2 bolts, wire bracket and starter.
37. A/T:
REMOVE OIL COOLER TUBES FOR
TRANSMISSION
(a) Remove the 2 hose clamp bolts and tube clamp bolt.
(b) Loosen the 2 union nuts, and remove the oil cooler tubes.
38. M/T:
REMOVE CLUTCH COVER SET BOLTS
(a) Remove the 2 bolts and service hole cover.
(b) Place the matchmarks on the flywheel and clutch cover.
(c) Remove the 6 bolts.
39. A/T:
REMOVE TORQUE CONVERTER CLUTCH
MOUNTING BOLTS
(a) Remove the hole plug.
(b) Turn the crankshaft to gain access to each bolt. Remove
the 6 bolts.
40. SEPARATE ENGINE AND TRANSMISSION
Remove the 6 bolts and transmission.