1997 TOYOTA SUPRA cruise control

SF0H7-01
P18724
Cruise Control Actuator Cable
Throttle Body
Sub-Throttle
Position Sensor
Connector
PS Air Hose Air Hose
Gasket
Throttle Position Sensor
Connector
Sub-Throttle Actuator ConnectorEVAP Hose
Water Bypass HoseAccelerator Cable

Non - reusable part SF-42
- SFI (2JZ-GTE)THROTTLE BODY
1368 Author
: Date
:
1997 SUPRA (RM502U)
COMPONENTS

P11327
(4) (3)
(2)
(!) (5)
(6)
P11328
SF0H8-01
P11329
(1)
(2)
(3)
(4)
- SFI (2JZ-GTE)THROTTLE BODY
SF-43
1369 Author
: Date
:
1997 SUPRA (RM502U)
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE THROTTLE BODY
(a) Disconnect the hose, cables and connectors from the
throttle body:
(1) Air hose
(2) Accelerator cable
(3) Cruise control actuator cable
(4) Throttle position sensor connector
(5) Sub-throttle position sensor connector
(6) Sub-throttle actuator connector
(b) Remove the 2 bolts and 2 nuts, and disconnect the
throttle body from the air intake chamber.
Torque: 21 N´m (210 kgf´cm, 15 ft´lbf)
(c) Remove the gasket.
HINT:
Use a new gasket.
(d) Disconnect these hoses from the throttle body, and re-
move the throttle body:
(1) EVAP hose
(2) Water bypass hose (from No.4 water bypass pipe)
(3) Water bypass hose (from cylinder head)
(4) PS air hose

SF0I0-01
Z13774
Cruise Control Actuator Cable
Accelerator Cable
Throttle Body
Sub-Throttle
Position Sensor
Connector
Air Hose
Gasket
Throttle Position Sensor
Connector
EVAP Hose
Sub-Throttle Actuator Connector
Water Bypass Hose
Knock Sensor 1
Engine Wire
Bracket
Starter
Starter Connector

Non-reusable partStarter Wire PS Air Hose
Knock Sensor 1 Connector
Knock Sensor 2
Knock Sensor 2 Connector SF-74
- SFI (2JZ-GTE)KNOCK SENSOR
1400 Author
: Date
:
1997 SUPRA (RM502U)
KNOCK SENSOR
COMPONENTS

SS0D4-01
- SERVICE SPECIFICATIONSBRAKE
SS-61
218 Author
: Date
:
1997 SUPRA (RM502U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Master cylinder x Piston stopper bolts101007
Master cylinder x Reservoir1.81816 in.´lbf
Master cylinder x Brake booster131309
Brake line union nut1515511
Brake booster clevis lock nut2526019
Brake booster x Pedal bracket131309
Bleeder plug1111 08
Front disc brake caliper x Steering knuckle 2JZ-GTE Engine11 81,20087
Front disc brake torque plate x Steering knuckle 2JZ-GE Engine11 81,20087
Front disc brake caliper installation bolt 2JZ-GE Engine3435025
Front disc brake caliper x Flexible hose union bolt3031022
Rear disc brake caliper x Axle carrier 2JZ-GTE Engine1041,06577
Rear disc brake torque plate x Axle carrier 2JZ-GE Engine1041,06577
Rear disc brake caliper installation bolt 2JZ-GE Engine3435025
Rear disc brake caliper x Flexible hose union bolt3031022
ABS actuator x ABS actuator bracket5.45548 in.´lbf
ABS actuator assembly x Body1919514
Cruise control actuator x Body1919514
Cruise control actuator x ABS actuator x Body1919514
Front speed sensor installation bolt7.88069 in.´lbf
Front speed sensor harness set bolt5.45548 in.´lbf
Rear speed sensor installation bolt7.88069 in.´lbf
Rear speed sensor harness set nut5.45548 in.´lbf

TC00D-02
P20891
No.1 Air Hose
Air Cleaner
and MAF Meter
Assembly
Tube Bracket

Non-reusable Air Cleaner Duct
Theft Deterrent Horn
Tube Clamp
A/T Oil Cooler TubeMAF Meter Connector
Engine Wire Protector
Cruise Control
Actuator Cable
Heat Insulator
for No.2 Front
Exhaust Pipe
Pipe Support Bracket
Gasket
Tube ClampFront Lower Arm
Bracket Stay
Engine Under CoverUpper Front
Crossmember
ExtensionNo.2 Front
Exhaust Pipe

Gasket
x 16




- TURBOCHARGING (2JZ-GTE)TURBOCHARGER
TC-7
1207 Author
: Date
:
1997 SUPRA (RM502U)
COMPONENTS

TC00E-02
P11430
ClampWire
P11348Arm Bracket Stay
Crossmember
Extension
P12054
TC-10
- TURBOCHARGING (2JZ-GTE)TURBOCHARGER
1210 Author
: Date
:
1997 SUPRA (RM502U)
REMOVAL
1. DRAIN ENGINE COOLANT
2. REMOVE ENGINE UNDER COVER
3. DISCONNECT CRUISE CONTROL ACTUATOR
CABLE FROM THROTTLE BODY
4. REMOVE NO.1 AIR HOSE
5. REMOVE AIR CLEANER DUCT
6. REMOVE AIR CLEANER AND MAF METER
ASSEMBLY
(a) Remove the 3 bolts.
(b) Loosen the hose clamp, disconnect the air hose from the
intake air connector.
(c) Disconnect the MAF meter wire from the clamp on the air
cleaner case.
(d) Disconnect the MAF meter connector, and remove the air
cleaner and MAF meter assembly.
7. DISCONNECT THEFT DETERRENT HORN FROM
BODY
8. REMOVE FRONT LOWER ARM BRACKET STAY
Remove the 2 bolts, nut, plate washer and arm bracket stay.
Torque:
Bolts 44 N´m (450 kgf´cm, 33 ft´lbf)
Nut 59 N´m (600 kgf´cm, 43 ft´lbf)
9. REMOVE UPPER FRONT CROSSMEMBER
EXTENSION
Remove the 2 bolts, 2 nuts and crossmember extension.
Torque:
Bolts 29 N´m (300 kgf´cm, 22 ft´lbf)
Nuts 33 N´m (340 kgf´cm, 25 ft´lbf)
10. REMOVE NO.2 FRONT EXHAUST PIPE
(a) Remove the 2 bolts and nuts holding the front exhaust
pipe to the No.2 front exhaust pipe.
Torque: 58 N´m (590 kgf´cm, 43 ft´lbf)
(b) Remove the 2 bolts and pipe support bracket.
Torque: 43 N´m (440 kgf´cm, 32 ft´lbf)
(c) Disconnect the front exhaust pipe from the No.2 exhaust
pipe. Remove the gasket.
HINT:
At the time of installation, please refer to the following items.
Use a new gasket.