1997 PONTIAC FIREBIRD Owners Manual

PASS-Key’ I1
Your vehicle is equipped
with the PASS-Key
11
(Personalized Automotive
Security System)
theft-deterrent system.
PASS-Key
I1 is a passive
theft-deterrent system.
It
works when you insert os
remove the key from
the ignition.
PASS-Key I1 uses a resistor pellet in the ignition key
that matches a decoder
in your vehicle.
When the PASS-Key I1 system senses that someone is
using the wrong key, it shuts down the vehicle’s starter
and fuel systems. For about three minutes, the starter
won’t work and fuel won’t go to the engine. If someone
tries to start your vehicle again
or uses another key
during this time, the vehicle will not start.
This
discourages someone from randomly trying different
keys with different resistor pellets
in an attempt to make
a match.
The ignition key must be clean and dry before it’s
inserted
in the ignitio’n or the engine may not start. If the
engine
does not start and the SECURITY light stays on
when you try to start the vehicle, the key may be dirty or
wet,
Turn the ignition off.
2-16

Clean and dry the key. Wait about three minutes and try
again. The SECURITY light may remain on during this
time. If the starter still won’t work, and the key appears
to be clean and dry, wait about three minutes and try
another ignition key. At this time, you may also want to
check the fuses (see “Fuses and Circuit Breakers” in the
Index). If the starter won’t work with the other key, your
vehicle needs service.
If your vehicle do’es start, the first
ignition key may be faulty. See your Pontiac dealer or a
locksmith who can service the PASS-Key
11.
If you accidentally use a key that has a damaged or
missing resistor pellet, the starter won’t work, and the
SECURITY light will flash. But you don’t have to wait
three minutes before trying another ignition key.
See your Pontiac dealer or
a locksmith who can service
the PASS-Key
I1 to have a new key made.
If you’re ever driving and the SECUFUTY light comes on and
stays on, you will be able to restart your engine if you
turn it
off. Your PASS-Key II system, however, is not working
properly and must be serviced by your Pontiac dealer. Your
vehicle is not protected by the PASS-Key
II system.
If
you lose or damage a PASS-Key I1 ignition key, see
your Pontiac dealer or a locksmith who can service
PASS-Key
I1 to have a new key made. In an emergency,
call the Pontiac Roadside Assistance Program at
1-800-ROADSIm or 1-800-762-3743.
Feature Customization (If Equipped)
Your Pontiac’s locks and lighting systems can be
programmed with several different features. The
features you can program depend upon the options that
came with your vehicle. The following list
tells you the
features that can be programmed. Listed next to each
feature is the option you need to have
on your vehicle in
order to be able to program that particular feature.
0
0
0
0
0
0
0
0
0
Exit Lighting (available for all)
Delayed Illumination (available for all)
Last Door Closed Locking (if equipped with power
door locks)
Lockout Prevention
(if equipped with power door locks)
Remote Lock Control Verification (if equipped with
Vehicle and Content Theft-Deterrent System)
Theft-Deterrent Arming Method
(if equipped with
Vehicle and Content Theft-Deterrent System)
Theft-Deterrent Arming Verification
(if equipped
with Vehicle and Content Theft-Deterrent System)
Driver’s Door Alarm Delay (if equipped with
Vehicle and Content Theft-Deterrent System)
Shock Sensor Enable (if equipped with Vehicle and
Content Theft-Deterrent System)

To program features, your vehicle must be in the
programming mode. Follow these steps:
1.
2.
3.
4.
5.
Put your key in the ignition.
Turn the ignition to the
RUN pos’ition to disarm the
Vehicle and Content Theft-Deterrent System.
Turn the ignition
to the OFF position.
Remove the RADIO
fuse. This fuse is in the main
fuse block, located on the left side of your
instrument panel. See “Fuses and Circuit Breakers”
in the Index.
Put the ignition in the
ACC position:
You should hear
a chime to verify that the system is
in programming mode.
If the chime sounds once,
you will be able
to program Exit Lighting, Delayed
Illumination, Last Door Closed Locking and Lockout
Prevention only.
If the chime sounds twice and your
vehicle is equipped with the Vehicle and Content
Theft-Deterrent System,
you will also be able to set
Remote
Lock Control Verification, Arming Method,
Arming Verification, Driver’s Door Delay and Shock
Sensor Enable.
Exit Lighting and Delayed Illumination
Exit Lighting: Your interior lights will come on for
up to
25 seconds when the key is removed from the
ignition switch.
Delayed Illumination: Your interior lights will stay
on
for up to 25 seconds when entering your vehicle and up
to five seconds when leaving your vehicle.
Your vehicle comes with both features enabled (Mode
4).
To change the factory setting, do the following:
1. Turn the courtesy lamps on by turning the instrument
panel brightness control knob all the way up.
2. Count the number of chimes you hear. The number of
chimes tells you which mode your vehicle is set for.
3. Turn the courtesy lamp switch to off.
4. Turn the courtesy lamp switch from on to off until
you hear the number of chimes that correspond to the
mode selection
you want.
Mode 1: Both Off
Mode 2: Delayed Illumination Only
Mode 3: Exit Lighting Only
Mode 4: Both On
2-18

Last Door Closed Locking and
Lockout Prevention
Your vehicle comes with this feature set in Mode 2. This
means that your power door locks will not lock when
the keys are in the ignition and a door is open. To
change the factory setting, do the following:
1. Press the LOCK switch on the door.
2. Count the number of chimes you hear. The number of
chimes tells you which mode your vehicle is set for.
3. Press the LOCK switch on the door until you hear
the number
of chimes that correspond to the mode
selection you want.
Mode 1: Both O€€ (Doors will 1ocWunlock when you
press the power door lock switch).
Mode 2: Lockout Prevention Only (If you leave your
keys in the ignition and get out the driver’s door, you
won’t be able
to lock the doors with the power door
lock switch).
Mode 3: Last Door Closed Locking Only (If the power
door lock switch is used to lock the vehicle while any
door is open, you will hear three chimes. The doors will
not lock until after all doors are closed).
Mode 4: Both On (This combines Mode 2 and 3).
Remote Keyless Entry Lock Verification
Your vehicle comes with this feature set in Mode 5. This
means that when you
use the key chain transmitter to
lockhnlock your vehicle, your parking lamps will flash
briefly upon the first push
on LOCK. Your horn will
sound briefly, your parking lamps will flash briefly upon
the second push on LOCK and your parking lamps will
flash briefly upon any push on UNLOCK.
To change the
factory setting, do the following:
1. Press the UNLOCK switch on the Remote Keyless
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is
set for.
Entry transmitter.
3. Press the UNLOCK switch on the Remote Keyless
Entry transmitter until you hear the number
of
chimes that correspond to the mode selection
you want.
2-19

Mode 1: All Off (The headlamps will not flash and the
horn will not sound
to provide you feedback that a
lock/ud~& command has been received by the Remote
Lock Control transmitter).
Mode 2: Horn and LampdLamps (Your horn will sound
briefly and your parking lamps will flash when you
press
LOCK on the key chain transmitter. Only your
parking lamps will flash when you press
UNLOCK).
Mode 3: Horn and Lamps (Your horn will sound briefly
and your parking lamps will flash every time you push
LOCK and
UNLOCK).
Mode 4: Lamps (Your parking lamps will flash every
time
you push LOCK and UNLOCK),
Mode 5: Lamps/Horn and Lamps/Lamps (Your
lamps will flash
upon the first push on LOCK, your
lamps will flask and
your horn will sound upon the
second push on
LOCK and your lamps will flash upon
any push on
UNLOCK).
Theft-Detlerrent Arming Method
Your vehicle comes with this feature set in Mode 3. This
means that both your key chain transmitter and the
power door lock switch will actively arm the system.
To
change the factory setting, do the following:
1. Press the UNLOCK switch on the door.
2. Count the number of chimes you hear. The number of
chimes tells you which mode your vehicle is set for,
3. Press the UNLOCK switch on the door until you
hear the number
of chimes that correspond to the
mode selection
you want.
Mode I: Alarm System Off (The system will not arm).
Mode 2: Key Chain Transmitter Lock (When you lock
your doors using the Key Chain Transmitter, the system
will arm itself).
Mode 3: Key Chain TransmittedPower Door Lock
Switch
(If you use either the Key Chain Transmitter or
the power door
lock switch to lock the doors, the system
will arm itself).
Mode 4: Passive arming and Remote Lock Control
Transmitter/Power Door Lock Switch Arming
(The
system will arm itself after all doors are closed plus
arming per;mg&
3).
2-20

Theft-Deterrent Arming Verification
Your vehicle comes with this feature set in Mode 3. This
means that if you arm the system using the key chain
transmitter, your parking lamps will flash and your horn
will chirp twice to verify that the system is armed. If it
only chirps once, the hatch is open or unlatched. If you
arm the
system using either the power door lock switch
or by passive arming, only the parking lamps will flash
for verification. To change the factory setting, do
the following:
1. Press the LOCK switch on the key chain transmitter.
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is
set for.
3. Press the LOCK switch on the key chain transmitter
until you hear the number of chimes that correspond
to the mode selection
you want.
Mode 1: All Off (No horn chirps or parking lamp flash).
Mode 2: Horn and Lamps (Your parking lamps will
flash and your horn will chirp twice to verify the system
is armed using any arming method).
Mode 3: Horn and Lamps/Lamps (If you use the key
chain transmitter to arm the system, your parking lamps
will flash and your horn will chirp twice to verify that
the system is armed. If you use either the power door
lock switch or passive arming, only your lamps will
flash for verification).
Mode 4: Lamps (When your vehicle arms, only your
parking lamps will flash for verification).
2-21

Driver’s Door Alarm Delay and Shock
Sensor Enable
Your vehicle comes with this feature set in Mode 4.
This means that if you open the driver’s door using
your key, the alarm will not sound
for eight seconds.
Also the shock sensor, able
to detect sharp blows to
your vehicle, is active.
To change the factory setting, do
the following:
1. Turn the parking lamps
on and off,
2. Count the number of chimes you hear. The number
of chimes tells you which mode your vehicle is
set for.
3. Turn the parking lamps on and off until you hear the
number of chimes that correspond to the mode
selection you want.
Mode 1: Zero Delay and Shock Sensor Disabled (The
alarm will sound immediately
if the driver’s door is
opened with your
key and the shock sensor will not be
available to measure sharp blows to your vehicle).
Mode 2: Eight Second Delay and Shock Sensor
Disabled (The alarm will sound eight seconds after the
driver’s door is opened with your key and the shock
sensor will not be available to measure sharp blows to
your vehicle),
Mode 3: Zero Relay and Shock Sensor Enabled (The
alum will sound immediately after the driver’s door is
opened with your key and the
shock sensor will be
available
to measure sharp blows to your vehicle).
Mode 4: Eight Second Delay and Shock Sensor Enabled
(The alarm will
sound eight seconds after the driver’s
door is
opened with your key and the shock sensor will
be available to measure sharp
blows to your vehicle).
Leaving Programming Mode
When programming is done, turn the ignition switch to
the
OFF position and replace the RADIO fuse.
2-22

New Vehicle “Break-In” Ignition
Switch
NOTICE:
Your modern Pontiac doesn’t need an elaborate
“break-in.” But it will perform better in the long
run
if you follow these guidelines:
a
a
a
Keep your speed at 55 mph (88 kmh) or
less
for the first 500 miles (805 km).
Don’t drive
at any one speed -- fast or
slow
-- for the first 500 miles (805 km).
Don’t make full-throttle starts.
Avoid making hard stops for the first
200 miles (322 km) or so. During this time
your new brake linings aren’t yet broken
in. Hard stops with new linings can mean
premature wear and earlier replacement.
Follow this breaking-in guideline every
time you get new brake linings.
Don’t
tow a trailer during break-in.
See “Towing
a Trailer’’ in the Index for
more information.
C
I
D
A E
With the ignition key in the ignition switch, you can turn
the switch to five positions.
ACC (A): Position in which you can operate your
electrical power accessories. Press in the ignition switch
as you turn the top
of it toward you.
LOCK (B): The only position in which you can remove
the
key. This locks your steering wheel, ignition an’d
automatic transmission.
2-23