1997 PONTIAC FIREBIRD Owners Manual

Non-Greasy Stains
Stains caused by catsup, coffee (black), egg, fruit, fruit
juice, milk, soft drinks, wine, vomit, urine and blood can
be removed as follows:
1.
2.
3.
4.
Carefully scrape off excess stain, then sponge the
soiled area with cool water.
If
a stain remains, follow the foam-type instructions
described earlier.
If an odor lingers after cleaning vomit or urine,
treat the
area with a waterhaking soda solution:
1 teaspoon (5 ml) of baking soda to 1 cup (250 m~l)
of lukewarm water.
If needed, clean lightly with solvent-type cleaner.
Combination Stains
Stains caused by candy, ice cream, mayonnaise, chili
sauce and unknown stains can be removed
as follows:
i. Carefully scrape off excess stain.
2. Clean with cool water and allow to dry.
3. If a stain remains, clean it with solvent-type cleaner.
Cleaning 'Vinyl
Use warm water and a clean cloth.
0 Rub with a clean, damp cloth to remove dirt. You
may have to do it more than once.
0 Things like tar, asphalt and shoe polish will stain
if you don't get them off quickly. Use a clean
cloth and a vinylfleather cleaner. See your dealer
for this product.
Cleaning Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap and wipe
dry with a soft cloth. Then, let the
leather dry naturally.
Do not use heat to dry.
a
0
0
For stubborn stains, use a leather cleaner. See your
dealer
for this product.
Never use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or'shoe polish on leather.
Soiled
or stained leather should be cleaned
immediately.
If dirt is allowed to work into the
finish, it can harm the leather,
6-60

Cleaning the Top of the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to see through the windshield
under certain conditions.
Care of Safety Belts
Keep belts clean and dry.
Do not bleach or dye sal belts. 1 v'ou do, it
may severely weaken them. In a crash, they
might not be able to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
Glass
Glass should be cleaned often. GM Glass Cleaner (GM
Part
No. 1050427) or a liquid household glass cleaner
will remove normal tobacco
smoke and dust films on
interior glass.
Don't use abrasive cleaners on glass, because they may
cause scratches. Avoid placing decals on
the inside rear
window, since they may have to be scraped off later. If
abrasive cleaners are used on the inside
of the rear
window, an electric defogger element
may be damaged.
Any temporary license should not be attached across the
defogger grid.
6-61

Cleaning the Outside of the
Windshield
an’d Wiper B’lades
If the windshield is not clear after using the windshield
washer, or if the wiper blade chatters when running,
wax, sap or other material may be on the blade
or
windshield.
Clean the outside
of the windshield with GM Windshield
Cleaner, Bon Ami’ Powder (non-scratching glass
cleaning powder),
GM Part No. 105001 1. The
windshield is clean if beads
do not form when you
rinse it with water.
Grime from the windshield will stick to the wiper blades
and affect their performance. Clean the blade by wiping
vigorously with a
cloth soaked in full-strength
windshield washer solvent. Then rinse the blade with
water.
Check the wiper blades and clean them
as necessary;
replace blades that look worn.
Weatherstrips
Silicone grease on weatherstrips will make them last
longer, seal better, and not stick or
squeak. Apply
silicone grease with a clean cloth at least every six
months. During very cold, damp weather more frequent
application may be required. (See “Recommended
Fluids and Lubricants” in the Index.)
Cleaning a Removable Roof Panel
Special care is necessary when cleaning, removing
and/or storing the
roof panel.
Flush with water to remove dust and dirt, then dry
the panel.
Clean the panel with GM Glass Cleaner. Leave the
cleaner on the panel for
one minute, then wipe the
panel with
a soft, lint-free cloth.
Don’t use abrasive cleaning materials.
6-62

Cleaning the Outside of Your Pontiac
The paint finish on your vehicle provides beauty, depth
of color, gloss retention and durability.
Washing Your Vehicle
The best way to preserve your vehicle’s finish is to keep
it clean by washing
it often with lukewarm or cold water.
Don’t wash your vehicle in the direct rays of the sun.
Don’t use strong soaps
or chemical detergents. Use
liquid hand, dish or car washing (mild detergent) soaps.
Don’t use cleaning agents that are petroleum based, or
that contain acid
or abrasives. All cleaning agents
should be flushed promptly and not allowed to dry on
the surface,
or they could stain. Dry the finish with a
soft, clean chamois or an all-cotton towel to avoid
surface scratches and water spotting.
High pressure car washes may cause water to enter
your vehicle.
Finish Care
Occasional waxing or mild polishing of your Pontiac by
hand may be necessary to remove residue from the paint
finish. You can get GM-approved cleaning products
from your dealer. (See “Appearance Care and Materials”
in the Index.) Your
Pontiac has a “basecoat/clearcoat” paint finish.
The clearcoat gives more depth and gloss to the
colored basecoat. Always use waxes and polishes
that are non-abrasive and made for a basecoat/clearcoat
paint finish.
NOTICE:
Machine compounding or aggressive polishing on
a basecoat/clearcoat paint finish may dull the
finish or leave swirl marks.
Foreign materials such as calcium chloride and other
salts,
ice melting agents, road oil and tar, tree sap, bird
droppings, chemicals from industrial chimneys, etc.,
can damage your vehicle’s finish if they remain on
painted surfaces. Wash the vehicle as soon as possible.
If necessary, use non-abrasive cleaners that are marked
safe for painted surfaces to remove foreign matter.
Exterior painted surfaces are subject
to aging, weather
and chemical fallout
that can take their toll over a perioc
of years. You can help to keep the paint finish looking
new by keeping your Pontiac
garaged or covered
whenever possible.
1
6-63

Cleaning Your Convertible Top
Your c’onvertible top should be cleaned often. If you use
an automatic car wash, use one with water jets and
hanging cloths. High pressure car washes may cause
water
to enter your vehicle.
When you hand wash the top,
do it in partial shade. Use
a mild
soap, lukewarm water and a soft sponge, A
chamois or cloth may leave lint on the top, and a brush
can chafe the threads in the top fabric. Don’t use
detergents, harsh cleaners, solvents or bleaching agents.
When you clean the top, put one hand under it to
support it. Wet the entire vehicle and wash the top
evenly to avoid spots or rings. Let the soap remain on
the fabric for
a few minutes. When the top is really
dirty, use a mild foam-type cleaner. Thoroughly rinse
the entire vehicle, then let
the top dry in direct sunlight.
Aluminum or Chrome Wheels
(I€ Equipped)
Keep your wheels clean using a soft clean cloth with
mild soap and water. Rinse with clean water. After
rinsing thoroughly,
dry with a soft clean towel. A wax
may then be applied.
The surface
of these wheels is similar to the painted
surface
of your vehicle. Don’t use strong soaps,
chemicals, abrasive polishes, abrasive cleaners
or
abrasive cleaning brushes on them because you could
damage the surface. You may use chrome polish on
chrome wheels, but avoid any painted surface of the
wheel, and buff off immediately after application.
Don’t
take your vehicle through an automatic car wash
that has silicon carbide tire cleaning brushes. These
brushes can also damage the surface
of these wheels.
To protect the convertible top:
After you wash the vehicle, make sure the top is
completely
dry before you lower it.
Don’t get any cleaner on the vehicle’s painted finish;
it
could leave streaks.
~f YOU decide to go through an automatic car wash,
ask the manager if the equipment could damage
your top.
6-64

Tires Sheet Metal Damage
To clean
your tires, use a stiff brush with a tire cleaner.
NOTICE:
When applying a tire dressing always take care to
wipe off any overspray or splash from all painted
surfaces on the body or wheels of the vehicle.
Petroleum-based products may damage the
paint finish.
If your vehicle is damaged and requires sheet metal
repair
or replacement, make sure the body repair shop
applies anti-corrosion material to the parts repaired or
replaced to restore corrosion protection.
Finish Damage
Any stone chips, fractures or deep scratches in the finish
should be repaired right away. Bare metal will corrode
quickly
and may develop into a major repair expense.
Minor chips and scratches can be repaired with touch-up
materials available from your dealer or other service
outlets. Larger areas
of finish damage can be corrected
in your dealer's body and paint shop.

Underbody Maintenance
Chemicals used for ice and snow removal and dust
control can collect on the underbody. If these are not
removed, accelerated corrosion (rust) can occur on the
underbody parts
such as fuel lines, frame, floor pan and
exhaust system even though they have corrosion
protection.
At least every spring, flush these materials from the
underbody with plain water. Clean any areas where mud
and other debris can collect. Dirt packed in closed areas
of the frame should be loosened before being flushed.
Your dealer or an underbody car washing system can do
this for you.
Chenf ea1 Paint Spotting
Some weather and atmospheric conditions can create a
chemical fallout, Airborne pollutants can fall upon and
attack painted surfaces on your vehicle. This damage
can take two forms: blotchy, ringlet-shaped
discolorations,
and ,mall irregular .dark spots etched into
the paint surface.
Although no defect in the paint
job causes this, Pontiac
will repair, at
no charge to the owner, the surfaces of
new vehicles damaged by this fallout condition within
12 months or 12,000 miles (20 000 km) of purchase,
whichever occurs first.
6-66

Appearance Care Materials Chart
PART NUMBER USAGE DESCRIPTION SIZE
994954 Exterior
Polish
Polishing Cloth - Wax Treated 23 in. x 25 in. -
1050004
Exterior wash
Wash and Wax
Concentrate 16
02. (0.473 L) 1052870 Cleans
grease, grime and smoke
film Glass Cleaner 23 oz. (0.680 L) I050427
Spot and stain removal
Vinyl
Cleaner 32 oz. (0.946 L) 1050214 Exterior
cleaner and polish
Magic Mirror Cleaner Polish
1 gal. (3.785 L) 1050200
Removes soil and black marks
White Sidewall Tire Cleaner
16 02. (0.473
L)
1050 174 Removes rust and corrosion
Chrome Cleaner and Polish 16
oz. (0.473
L)
10501 73
Also removes old waxes and polishes
Tar and Road Oil
Remover 16 oz. (0.473 L) 10501 72 Shines vehicle without scratching Chamois
2.75
sq. ft.
~
10529 18**
16 02. (0.473 L) 1052925 Protects vinyl, leather and rubber
Armor
All TM Protector 8 oz. (0.237 L)
Attracts and absorbs soils Capture Dry Spot Remover
8 oz. (0.237 L)
1052930 Spray
on wheel cleaner
Wheel Cleaner
16 oz. (0.473
L)
1052929 Cleans
vinyl, cloth,
tires and mats Multi-Purpose Powdered Cleaner
12345002**
16 oz. (0.473 L) Armor All TM Cleaner Cleans vinyl, leather and rubber
12345725
Spot cleans paint and gives high luster
Finish Enhancer
16
oz. (0.473
L)
12377966 Protects finish and removes
fine scratches
Cleaning
Wax
16
02. (0.473 L)
12377964 Shines tires
Silicone Tire
Shine 12
oz. (0.354 L)
See your General Motors Parts Department for these products. *‘N Not recommended for use on instrument panel vinyl.
See
“Fluids and Lubricants” in the Index.
6-67