1996 TOYOTA TERCEL diagram

N12895
BG BH
W-B W-B 1Luggage Compartment
Door Key Lock and Unlock SwitchL4
2
LIE29
LT49
LUG Theft Deterrent ECU
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
DI-241
1996 TERCEL (RM440U)
Luggage Compartment Door Key Lock and Unlock Switch
Circuit
CIRCUIT DESCRIPTION
The luggage compartment door key lock and unlock switch goes on when the luggage compartment door
key cylinder is turned to the unlock side with the key.
WIRING DIAGRAM
DI4NC-01

N12896
Rear LeftR-W R-W
Rear Right R-W 2
1 Security Diode1
R-W
Instrument Panel
Junction Block11
1L6
1CR-W3
T4 CTY Front Right1
(2Dr) R
(4Dr) R-G8
IE2R-G19
T4 DSWP Door Courtesy Switch
Front Leftto Door Light
11
IE2R7
T4DSWD Theft Deterrent ECU
F8
F9
11
R11R12 R DI-244
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
1996 TERCEL (RM440U)
Door Courtesy Switch Circuit
CIRCUIT DESCRIPTION
The door courtesy switch goes on when the door is opened and goes off when the door is closed.
WIRING DIAGRAM
DI4ND-01

N12897
EB W-BEngine Room
Relay Block
(JUNCTION CONNECTOR)A
A
2 2Engine Hood
Courtesy Switch
12
LG-B12
IC2
LG-B14
T4 Theft Deterrent ECU
DSWH
E5
W-B DI-246
- DIAGNOSTICSTHEFT DETERRENT SYSTEM
1996 TERCEL (RM440U)
Engine Hood Courtesy Switch Circuit
CIRCUIT DESCRIPTION
The engine hood courtesy switch is built into the engine hood lock assembly and goes on when the engine
hood is opened and goes off when the engine hood is closed.
WIRING DIAGRAM
DI4NE-02

CO18B-01
CO1205
Dimension B
Stopper Bolt
Overhaul HandlePart A
ClawSST
P21090
Lock
Plate
Stopper BoltTank
P21091
CO-18
- COOLINGRADIATOR
1996 TERCEL (RM440U)
DISASSEMBLY
1. ASSEMBLE SST
SST 09230-01010
(a) Install the claw to the overhaul handle, inserting it in the
hole in part A as shown in the diagram.
(b) While gripping the handle, adjust the stopper bolt so that
dimension B is as shown in the diagram is 0.2 - 0.5 mm
(0.008 - 0.020 in.).
NOTICE:
If this adjustment is not performed, the claw may be dam-
aged.
2. UNCAULK LOCK PLATES
Using SST to release the caulking, squeeze the handle until
stopped by the stopper bolt.
SST 09230-01010
3. REMOVE TANKS AND O-RINGS
Lightly tap the radiator hose inlet (or outlet) with a soft-faced
hammer, and remove the tank.
Remove the O-ring.
4. A/T:
REMOVE OIL COOLER FROM LOWER TANK
(a) Remove the 2 nuts, spring washers, plate washers and oil
cooler.
(b) Remove the O-ring from the oil cooler.

CO1206
Dimension B
Punch Assembly
Overhaul HandleStopper BoltPartSST
P21094
8 7
65
43
2
1
P21095
Stopper
BoltSSTTank
Lock
Plate
P21096
RibBracket
Claw
Z15037
CO-20
- COOLINGRADIATOR
1996 TERCEL (RM440U)
4. ASSEMBLE SST
SST 09230-01010
(a) Install the punch assembly to the overhaul handle, insert-
ing it in the hole in part A as shown in the illustration.
(b) While gripping the handle, adjust the stopper bolt so that
dimension B shown in the diagram is 7.7 mm (0.30 in.)
5. CAULK LOCK PLATE
(a) Lightly press SST against the lock plate in the order
shown in the illustration. After repeating this a few times,
fully caulk the lock plate by squeezing the handle until
stopped by the stopper plate.
SST 09230-01010
HINT:

Do not stake the areas protruding around the ports,brack-
et or tank ribs.

The oil cooler (A/T only) and the points attowed in the il-
lustlation cannot be staked with the SST. Use a plier or like
object and be careful not to damage the core plates.

AX08K-01
D01644
Stop Light SwitchKey Interlock Solenoid
Shift Lock
Override Button
Shift Lock Control
Unit Assembly
BatteryMAIN
FLALTStopIgnition Switch
ACC
IGCIG
ECU-IG
Stop Light
Switch
Stop
LightSTPShift Lock
Control ECUIG ACC
Key Interlock Solenoid
KLS
+
E WIRING DIAGRAM
- AUTOMATIC TRANSAXLE (A132L)SHIFT LOCK SYSTEM
AX-23
775 Author
: Date
:
1996 TERCEL (RM440U)
SHIFT LOCK SYSTEM
LOCATION

AX084-01
D01645
Key Interlock Solenoid
Stop Light SwitchShift Lock
Override Button
Shift Lock Control
Unit Assembly
BatteryMAIN
FLALTStopIgnition Switch
ACC
IGCIG
ECU-IG
IG
Shift Lock
Control ECUACC
Key Interlock Solenoid
KLS
+
E Stop Light
Switch
Stop
LightSTP WIRING DIAGRAM
- AUTOMATIC TRANSAXLE (A242L)SHIFT LOCK SYSTEM
AX-27
809 Author
: Date
:
1996 TERCEL (RM440U)
SHIFT LOCK SYSTEM
LOCATION