N00173
SST
SST
CM0061
MT0092
SST
- MANUAL TRANSAXLEDIFFERENTIAL CASE
MX-39
1996 TERCEL (RM440U)
3. INSTALL SIDE BEARING
(a) Install the speedometer drive gear to the RH side.
(b) Using SST and a press, install new side bearings to the
both sides of the case.
SST 09350-32014 (09351-32090, 09351-32120)
4. INSPECT DIFFERENTIAL SIDE BEARING PRELOAD
(a) Install the differential case assembly to the transaxle
case.
(b) Install the transmission case.
(c) Install and torque the case bolts.
Torque: 29 N´m (300 kgf´cm, 22 ft´lbf)
(d) Using SST and a torque wrench, measure the preload.
SST 09564-3201 1
Preload (at starting):
New bearing
0.8 - 1.6 N´m (8 - 16 kgf´cm, 6.9 - 13.9 in.´lbf)
Reused bearing
0.5 - 1.0 N´m (5 - 10 kgf´cm, 4.3 - 8.7 in.´lbf)
If the preload is not within the specification, remove the trans-
mission case side outer race of the side bearing with SST (See
page MX-36).
(e) Select another shim.
HINT:
The preload will change by approx. 0.3 - 0.4 N´m (3 - 4 kgf´cm,
2.6 - 3.5 in.´lbf) corresponding to a change of 0.05 mm in shim
thickness.
MarkThickness mm (in.)MarkThickness mm (in.)
A2.10 (0.0827)L2.60 (0.1024)
B2.15 (0.0846)M2.65 (0.1043)
C2.20 (0.0866)N2.70 (0.1063)
D2.25 (0.0886)P2.75 (0.1083)
E2.30 (0.0906)Q2.80 (0.1102)
F2.35 (0.0925)R2.85 (0.1122)
G2.40 (0.0945)S2.90 (0.1142)
H2.45 (0.0965)T2.95 (0.1161)
J2.50 (0.0984)U3.00 (0.1181)
K2.55 (0.1004)--
