SR0FC−01
− STEERINGSTEERING SYSTEM
SR−1
1996 RAV4 (RM447U)
STEERING SYSTEM
PRECAUTION
Care must be taken to replace parts properly because they could affect the performance of the
steering system and result in a driving hazard.
The TOYOTA RAV4 is equipped with SRS (Supplemental Restraint System) such as the driver
airbag and front passenger airbag. Failure to carry out service operation in the correct se-
quence could cause the SRS to unexpectedly deployed during servicing, possibly leading to
a serious accident. Before servicing (including removal or installation of parts, inspection or
replacement), be sure to read the precautionary notices in the RS section.
P00231
ST0N7−01
P00649
P00232
P00243
Stop Collar
Pinion Gear
Compression
Spring
P00239
− STARTINGSTARTER
ST−11
1996 RAV4 (RM447U)
REPLACEMENT
1. REPLACE CLUTCH ASSEMBLY
(a) Disassembly of starter housing and clutch assembly.
(1) Mount a brass bar in a vise, and install the starter
housing and clutch assembly to the brass bar.
(2) Push down the pinion gear.
(3) Using a plastic−faced hammer, tap down the stop
collar.
(4) Using a screwdriver, pry out the snap ring.
(5) Remove these parts:
Stop collar
Pinion gear
Compression spring
(6) Push down the starter housing, and remove the
spring retainer.
