1996 FORD ESCORT lock

75
*
[SR17150(E )08/95]
4. Insert the belt tongue into the buckle for that
seating position until you hear and feel the
latch engage. See Figure 3. Make sure tongue
is latched securely to buckle by pulling on
tongue.
*
[SR17155(E )06/95]
half page art:0011240-B
Buckling the belt
*
[SR17160(E )08/95]
5. Grasp the shoulder portion of the belt and
pull downward until all of the belt is
extracted and a click is heard. At this time,
the retractor is in the automatic locking
mode (child seat restraint mode). See
Figure 4.
*
[SR17165(E )06/95]
NOTE: The dual-locking mode retractor must
be in the automatic locking mode to
properly restrain a child.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

76
*
[SR17170(E )06/95]
half page art:0011241-A
Setting the retractor to automatic locking mode
*
[SR17175(E )08/95]
6. Allow the belt to retract. Pull up on the
shoulder webbing. A clicking sound will be
heard as the belt retracts. This indicates the
retractor is in the automatic locking mode.
Push down on the child seat while you pull
up on the belt to remove any slack in the
belt. See Figures 5 and 6.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

79
*
[SR17200(E )08/95]
8. Double check that the retractor is in the
automatic locking mode. Try to pull more
belt out of the retractor. If you cannot, the
belt is in the automatic locking mode. See
Figure 8.
*
[SR17205(E )06/95]
half page art:0011245-B
Checking the retractor
*
[SR17210(E )06/95]
9. Check to make sure that the child seat is
properly secured prior to each use. If the
retractor is not locked, repeat steps 4
through 7.
*
[SR17215(E )06/95]
To remove the retractor from automatic lock
mode, allow webbing to retract fully to its
stowed position and the retractor will
automatically switch back to the vehicle sensitive
locking mode for normal adult usage.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

87 [SR18600(ALL)01/95]
Attaching Child Safety Seats with Tether
Straps (For all vehicles)
*
[SR18700(ALL)06/95]
Some manufacturers make safety seats that
include a tether strap that goes over the back of
the vehicle seat and attaches to an anchoring
point. Other manufacturers offer the tether strap
as an accessory. Contact the manufacturer of
your child safety seat for information about
ordering a tether strap.
*
[SR19100(E )07/95]
If you use a tethered safety seat on one of the
rear seats, you can anchor the strap to the
appropriate tether anchor directly behind that
seat position.
*
[SR19110(ALL)08/95]
Front Seats
*
[SR19120(ALL)08/95]
To install a tether from a child safety seat in the
front seat:
*
[SR19130(ALL)08/95]
1. Buckle the lap/shoulder belt (in the seat
directly behind the front passenger seat in
which the child safety seat will be installed).
[SR19140(ALL)08/95]
2. Pull at the stored belt out of the rear seat
retractor to switch the retractor to automatic
locking mode.
*
[SR19150(ALL)08/95]
3. Let the retractor wind up the slack from the
lap/shoulder belt.
*
[SR19160(ALL)08/95]
4. Install the child safety seat in the front seat.
Refer to the previous section onInstalling
Safety Seats. Hook the tether strap hook
around the webbing near the center of the
shoulder portion of the locked lap/shoulder
belt.
*
[SR19170(ALL)08/95]
5. Tighten the tether strap.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

91 [SR20160(ALL)08/95]
Built-In Child Seat (If Equipped)
[SR20170(ALL)08/95]
The optional rear seat may include a built-in
child seat. This child restraint is to be usedonly
by children who are at least one year old, weigh
between 20 and 60 pounds (9 and 27 kilograms)
and whose shoulders (top) are below the
shoulder harness slots. See Figure 1.
[SR20180(ALL)08/95]
quarter page art:0070112-D
Figure 1: Proper child shoulder height
[SR20190(ALL)08/95]
If your child is less than one year old or weighs
less than 20 pounds (9 kilograms),alwaysuse a
rear facing infant or convertible seat because a
child of that size is not sufficiently developed to
withstand crash forces in a front facing position.
Follow the specific manufacturer's instructions
for weight and height restrictions.
[SR20200(ALL)08/95]
Children must be properly buckled before riding
in the vehicle. It is the law in every state and
province. This child seat conforms to all
Federal/Canadian motor vehicle safety
standards.
[SR20210(ALL)08/95]
RWARNING
The rear seatback must be fully locked
before operating the child restraint system.
[SR20220(ALL)08/95]
Ensure that the latch release buttons are in the
full up (locked) positions on both sides of the
seat.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

92 [SR20230(ALL)08/95]When the latch release buttons are in the full up
position (locked) and the built-in child seat is
open, the rear seatback cannot be unlocked and
folded down. See Figure 2.
[SR20240(ALL)08/95]
half page art:0070113-G
Figure 2: Latch release buttons
[SR20250(ALL)08/95]
Built-In Child Seat Belt Retractors
[SR20260(ALL)08/95]
The belts on the built-in child seat are equipped
with a dual locking mode retractor. The child
seat belts can be used with the retractor in either
the emergency locking mode or the automatic
locking mode. In the emergency locking mode,
the retractor allows freedom of movement,
locking only on hard braking, hard cornering, or
collisions. In the automatic locking mode, the
retractor will remain locked and does not allow
the child freedom of movement.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

93 [SR20270(ALL)08/95]
The retractor will switch from the emergency
locking mode to the automatic locking mode
when the shoulder belts are pulled all the way
out. The retractor will switch back to emergency
locking mode when the belts are unbuckled and
the shoulder belts retract completely.
[SR20280(ALL)08/95]
The automatic locking mode must be used to
hold small children in position, particularly
sleeping children and those who may try to
squirm out of the belts.
[SR20290(ALL)08/95]
RWARNING
Never leave a child unattended in your
vehicle.
[SR20300(ALL)08/95]
RWARNING
Safety belts and seats can become hot in a
vehicle that has been closed up in sunny
weather; they could burn a small child.
Check seat covers and buckles before you
place a child anywhere near them.
[SR20310(ALL)08/95]
RWARNING
Failure to follow all of the instructions on
the use of this child restraint system can
result in your child striking the vehicle's
interior during a sudden stop or crash.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

100 [SR20540(ALL)08/95]10. Pull on the safety belt tongues to be sure
that they are both latched. See Figure 10.
[SR20550(ALL)08/95]
half page art:0070123-B
Figure 10: Checking for securely latched buckle and locked
retractor
[SR20560(ALL)08/95]
11. If the child sleeps or tries to get out of the
child seat, pull shoulder out fully to put the
retractor into automatic lock mode. Allow
belts to tighten snugly against the child's
shoulders. See Figure 10.
[SR20570(ALL)08/95]
Automatic lock mode keeps a sleeping child in
position and prevents the child from getting out
of the seat while the vehicle is in motion. Older
children who do not fall asleep in the child seat
may be secured with the retractor in the
emergency locking mode. The belts will lock
automatically during a collison or hard braking.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995