1996 FORD ESCORT lock

101 [SR20580(ALL)08/95]
To remove the child from the built-in child
seat:
[SR20590(ALL)08/95]
1. Squeeze the tabs on the top and bottom of
the chest clip and pull the halves apart to
open the chest clip. Refer back to Figure 8.
[SR20600(ALL)08/95]
2. Press the release button on the crotch safety
belt buckle.
[SR20610(ALL)08/95]
3. Slide the shoulder belts off the child's
shoulders and remove the child. Refer back
to Figure 6.
[SR20620(ALL)08/95]
To stow the built-in child seat:
[SR20625(ALL)08/95]
When the built-in child seat is not in use, it can
be stowed so that an adult may use the center of
the rear seat or the rear seatback can be folded
down.
[SR20630(ALL)08/95]
1. Return the child seat cushion to the upright
position.
[SR20640(ALL)08/95]
2. Make sure shoulder belts are in the center of
the back of the child seat. Attach the cushion
retention clip. Fold the child seat up into the
seatback while tucking the top edge of the
child seat under the flap. See Figure 11.
[SR20650(ALL)08/95]
3. Press firmly in the center of the child seat to
keep in the stowed position. You will not be
able to unlock the rear seatback if the
built-in child seat is not stowed properly.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

102 [SR20660(ALL)08/95]
one third page art:0070156-EFigure 11: Stowing the built-in child seat
[SR20670(ALL)08/95]
Inspection after a collision:
[SR20680(ALL)08/95]
RWARNING
All built-in child restraints, including
seats, buckles, retractors, seat latches,
interlocks, and attaching hardware should
be inspected by a qualified Dealer
technician after any collision. If the child
seat was in use during a collision, Ford
recommends replacing it. However, if the
collision was minor and a qualified
technician finds that the child restraints
do not show damage and continue to
operate properly, they do not need to be
replaced. Built-in child seats not in use
during a collision should also be
inspected and replaced if either damage or
improper operation is noted.
[SR20690(ALL)08/95]
Built-in child seat maintenance
[SR20700(ALL)08/95]
Regularly inspect the lap and shoulder belts
system of your child seat. See your Ford dealer
if the shoulder belt webbing is frayed, or if the
buckle and tongue are damaged and/or do not
function properly.
File:03ctsre.ex
Update:Tue Sep 19 15:05:35 1995

105
Starting Your Escort
*
[ST03300(ALL)03/95]
Ignition
%*
[ST03400(ALL)01/95]
Understanding the Positions of the Ignition
[ST03500(ALL)09/95]
Your vehicle may have one of the following lock
cylinders depending on when it was built:
[ST03600(ALL)09/95]
quarter page art:0070292-A
The ignition lock cylinders
[ST03605(ALL)02/94]
LOCK locks the steering wheel when the key is
removed. It also locks the console-mounted
gearshift on vehicles with automatic transaxles.
To turn the key to this position on an automatic
transaxle vehicle, the shift control lever must be
in P (Park).
*
[ST03610(ALL)05/95]
RWARNING
LOCK position does not lock the gearshift
on floor-mounted manual transaxle
gearshifts. If the parking brake is not set
and the gearshift is moved out of gear,
your vehicle may move unexpectedly and
injure someone.
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995

106 [ST03615(ALL)08/95]The automatic transaxle console-mounted
gearshift will lock only when you turn the key
to LOCK. When the gearshift is in any gear
position but P (Park), the ignition key cannot be
turned to LOCK or be removed from the
steering column.
[ST03620(ALL)02/95]
If you have a manual transaxle, you must push
the key in while turning to the LOCK position
in order to remove the key.
*
[ST03625(ALL)01/95]
LOCK is the only position that allows you to
remove the key. The LOCK feature helps to
protect your vehicle from theft.
[ST03635(ALL)09/95]
OFF (if equipped) allows you to shut off the
engine and all accessories without locking the
steering wheel.
*
[ST03650(ALL)07/95]
ACC (accessory) allows some of your vehicle's
electrical accessories such as the radio and the
windshield wipers to operate while the engine is
not running.
[ST03850(ALL)02/95]
ON allows you to test your vehicle's warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. (The brake system warning light will
remain lit if the parking brake is set or if there
is a problem with the brake system.) The key
returns to the ON position once the engine is
started and remains in this position while the
engine runs.
[ST03900(ALL)02/95]
START cranks the engine. Release the key once
the engine starts so that you do not damage the
starter. The key should return to ON when you
release it. The START position also allows you
to test the brake system warning light.
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995

107 %
*
[ST04500(ALL)02/95]
Removing the Key From the Ignition
*
[ST04600(ALL)05/94]
Procedures for removing your key from the
ignition vary, depending on whether your
vehicle has an automatic or manual transaxle.
*
[ST04700(ALL)04/94]
If your vehicle has an automatic transaxle:
*
[ST04800(ALL)06/92]
1. Put the gearshift lever in P (Park).
*
[ST04900(ALL)01/95]
2. Set the parking brake fully.
*
[ST04950(ALL)03/95]
3. Turn the ignition key to LOCK.
*
[ST05100(ALL)03/95]
4. Remove the key.
*
[ST05200(ALL)04/94]
If your vehicle has a manual transaxle:
*
[ST05300(ALL)06/92]
1. Put the gearshift lever in 1 (First).
*
[ST05400(ALL)01/95]
2. Set the parking brake fully.
[ST05450(ALL)02/95]
3. Turn the ignition key counterclockwise to
ACC. Push the key in while turning to
LOCK.
*
[ST05900(ALL)03/95]
4. Remove the key.
%*
[ST06000(ALL)05/95]
If the key is stuck in the LOCK position, move
the steering wheel left or right until the key
turns freely.
*
[ST07500(ALL)06/95]
RWARNING
Always set the parking brake fully and
make sure that the gearshift is securely
latched in P (Park) (automatic transaxle) or
in 1 (First) (manual transaxle).
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995

109
*
[ST08400(ALL)01/95]
Before you start your vehicle, do the following:
*
[ST08500(ALL)08/95]
1. Make sure all occupants in the vehicle
buckle their safety belts. SeeSafety Restraints
in the Index for more details.
*
[ST08600(ALL)03/95]
2. Make sure the headlamps and other
accessories are turned off when starting.
*
[ST08700(ALL)02/92]
3.If you have an automatic transaxle, make
sure that the gearshift is in P (Park) and the
parking brake is set before you turn the key.
[ST08750(ALL)03/95]
If you have an automatic transaxle, your
vehicle has a special shift-lock safety feature.
It prevents you from moving the gearshift
lever out of the P (Park) position unless the
ignition is in the ON position and your foot
is on the brake. To move the gearshift lever,
you must also depress the thumb button.
*
[ST08800(ALL)07/93]
If you have a manual transaxle, make sure
that the parking brake is fully set, push the
clutch pedal to the floor, and put the
gearshift into Neutral before you turn the
key.(Remember, the starter will operate
only if the clutch pedal is pushed all the
way to the floor.)
[ST09000(ALL)06/95]
4. Before you start your vehicle, you should
check the warning lights on the instrument
panel to make sure that they work. Refer to
theWarning Lights and Gaugeschapter.
%*
[ST09400(ALL)02/95]
Starting Your Engine
*
[ST09500(ALL)06/95]
To start your engine:
*
[ST09600(ALL)05/95]
1. Follow the steps underPreparing to Start
Your Vehicleat the beginning of this section.
*
[ST09650(ALL)03/95]
2. Turn the ignition key to the ON position.
*
[ST09720(ALL)06/95]
3. DO NOT depress the accelerator pedal when
starting your engine. DO NOT use the
accelerator while the vehicle is parked.
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995

111
*
[ST09800(ALL)05/95]
NOTE: If your vehicle is equipped with an
automatic transaxle, your vehicle has
an interlock that prevents you from
shifting out of P (Park) unless your
foot is on the brake pedal.
%*
[ST09860(ALL)04/95]
If the engine does not start after two attempts:
*
[ST09880(ALL)03/95]
1. Turn the key to the OFF position and wait
about two minutes.
*
[ST09890(ALL)04/95]
2. Press the accelerator all the way to the floor
and hold it.
*
[ST09900(ALL)04/95]
3. Turn the ignition key to the START position.
*
[ST09910(ALL)04/95]
4. Release the ignition key when the engine
starts.
*
[ST09920(ALL)04/95]
5. Release the accelerator gradually as the
engine speeds up. Then drive away in the
normal manner.
*
[ST09930(ALL)04/95]
If the engine still does not start, the fuel pump
shut-off switch may have been triggered. For
directions on how to reset the switch seeFuel
Pump Shut-Off Switchlater in this chapter.
[ST10200(ALL)06/93]
A computer system controls the engine's idle
RPM. When you start your vehicle, the engine's
idling RPM normally runs higher than when
warm. The engine idle control system should
only be serviced by a qualified technician.
*
[ST10290(ALL)07/95]
If the engine idle speed does not slow down
automatically, do not allow your vehicle to idle
for more than 10 minutes. Have the vehicle
checked.
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995

112
*
[ST10300(ALL)05/95]
RWARNING
Extended idling at high engine speeds can
produce very high temperatures in the
engine and exhaust system, creating the
risk of fire or other damage.
*
[ST10350(ALL)05/95]
RWARNING
Do not park, idle, or drive your vehicle in
dry grass or other dry ground cover. The
emission system heats up the engine
compartment and exhaust system, which
can start a fire.
%*
[ST10550(ALL)06/95]
Using the Engine Block Heater
(If equipped)
*
[ST10700(ALL)03/95]
Engine block heaters are strongly recommended
if you live in a region where temperatures reach
S20ÊF (S29ÊC) orbelow consistently during the
winter months. An engine block heater warms
the engine coolant, which improves starting,
warms up the engine faster, and allows the
heater-defrost system to respond quickly.
*
[ST10900(ALL)02/95]
To turn the heater on, simply plug it into a
grounded 110-volt outlet. Ford recommends that
you use a 110-volt circuit that is protected by a
ground fault circuit interrupter.
*
[ST11100(ALL)05/95]
RWARNING
To prevent electrical shock, do not use
your heater with ungrounded electrical
systems or two-pronged (cheater) adapters.
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995