Page 107 of 387
![FORD ESCORT 1996 7.G Owners Manual 106 [ST03615(ALL)08/95]The automatic transaxle console-mounted
gearshift will lock only when you turn the key
to LOCK. When the gearshift is in any gear
position but P (Park), the ignition key cannot FORD ESCORT 1996 7.G Owners Manual 106 [ST03615(ALL)08/95]The automatic transaxle console-mounted
gearshift will lock only when you turn the key
to LOCK. When the gearshift is in any gear
position but P (Park), the ignition key cannot](/manual-img/11/4888/w960_4888-106.png)
106 [ST03615(ALL)08/95]The automatic transaxle console-mounted
gearshift will lock only when you turn the key
to LOCK. When the gearshift is in any gear
position but P (Park), the ignition key cannot be
turned to LOCK or be removed from the
steering column.
[ST03620(ALL)02/95]
If you have a manual transaxle, you must push
the key in while turning to the LOCK position
in order to remove the key.
*
[ST03625(ALL)01/95]
LOCK is the only position that allows you to
remove the key. The LOCK feature helps to
protect your vehicle from theft.
[ST03635(ALL)09/95]
OFF (if equipped) allows you to shut off the
engine and all accessories without locking the
steering wheel.
*
[ST03650(ALL)07/95]
ACC (accessory) allows some of your vehicle's
electrical accessories such as the radio and the
windshield wipers to operate while the engine is
not running.
[ST03850(ALL)02/95]
ON allows you to test your vehicle's warning
lights (except the brake system warning light) to
make sure they work before you start the
engine. (The brake system warning light will
remain lit if the parking brake is set or if there
is a problem with the brake system.) The key
returns to the ON position once the engine is
started and remains in this position while the
engine runs.
[ST03900(ALL)02/95]
START cranks the engine. Release the key once
the engine starts so that you do not damage the
starter. The key should return to ON when you
release it. The START position also allows you
to test the brake system warning light.
File:04ctste.ex
Update:Tue Sep 19 14:42:54 1995
Page 160 of 387
160 [SC01250(ALL)08/95]High Beams and Flashing the Lamps
[SC01300(ALL)08/95]
one third page art:0070281-A
High beams and flashing the lamps
[SC01350(ALL)08/95]
Windshield Wipers and Washer
[SC01400(ALL)08/95]
To turn on the windhsield wipers, the ignition
key must be turned to the ON or ACC position.
[SC01450(ALL)08/95]
one third page art:0070159-C
Windshield wipers and washer
[SC01500(ALL)08/95]
To set the interval wipers, rotate the knob at the
end of the turn signal lever toward or away
from the instrument panel to the interval
operation you desire.
File:07ctsce.ex
Update:Tue Sep 19 14:47:40 1995
Page 161 of 387
![FORD ESCORT 1996 7.G Owners Manual 161 [SC01550(ALL)08/95]
To clean the windshield, push in the end of the
wiper knob. For a constant spray, keep the knob
pushed in. After you release the knob, the
wipers operate for two or three cycle FORD ESCORT 1996 7.G Owners Manual 161 [SC01550(ALL)08/95]
To clean the windshield, push in the end of the
wiper knob. For a constant spray, keep the knob
pushed in. After you release the knob, the
wipers operate for two or three cycle](/manual-img/11/4888/w960_4888-160.png)
161 [SC01550(ALL)08/95]
To clean the windshield, push in the end of the
wiper knob. For a constant spray, keep the knob
pushed in. After you release the knob, the
wipers operate for two or three cycles before
turning off (if wipers were off) or retruning to
the interval setting selected.
[SC01600(ALL)08/95]
Do not try to clean the windshield when the
washer fluid container is empty or activate the
washers at any time for more than 15 seconds
continuously. This could damage the washer
pump system.
[SC01650(ALL)08/95]
RWARNING
In freezing weather, warm up the
windshield with the defroster before you
use the washer fluid. If you do not do
this, the washer solution may freeze on
the windshield and obscure your vision.
This may result in a collision, possibly
injuring you and others.
[SC01700(ALL)08/95]
For information about refilling the washer fluid
or replacing your windshield wiper blades, see
Windshield washer fluid and wipersin the Index.
File:07ctsce.ex
Update:Tue Sep 19 14:47:40 1995
Page 300 of 387
![FORD ESCORT 1996 7.G Owners Manual 301
*
[SV19480(ALL)04/93]
Leave the engine coolant in all year. Make sure
that the coolant will not freeze at the
temperature level in which you drive during
winter months. Keep an engine coolant in y FORD ESCORT 1996 7.G Owners Manual 301
*
[SV19480(ALL)04/93]
Leave the engine coolant in all year. Make sure
that the coolant will not freeze at the
temperature level in which you drive during
winter months. Keep an engine coolant in y](/manual-img/11/4888/w960_4888-299.png)
301
*
[SV19480(ALL)04/93]
Leave the engine coolant in all year. Make sure
that the coolant will not freeze at the
temperature level in which you drive during
winter months. Keep an engine coolant in your
engine that has a protection rating of at least
-20ÊF (-29ÊC), orwhatever protection rating is
appropriate for the climate in which you live.
*
[SV19900(ALL)02/95]
You may add water by itself only in an
emergency, but you should replace it with a
50/50 mixture as soon as possible.
*
[SV20000(ALL)01/95]
Have your dealer check the engine cooling
system for leaks if you have to add a quart
(liter) of engine coolant more than once a month.
%*
[SV20210(ALL)08/95]
Checking Hoses
*
[SV20220(ALL)01/93]
Inspect all engine and heater system hoses for
deterioration, leaks and loose clamps before
adding or replacing engine coolant. Make
whatever repairs or replacements are necessary
using Motorcraft parts or their equivalents.
%
*
[SV21700(ALL)03/95]
Windshield Washer Fluid and
Wipers
%*
[SV21800(ALL)03/95]
Washer Fluid
[SV22100(ALL)01/95]
The windshield washer reservoir is located in
the engine compartment.
*
[SV22350(ALL)05/95]
RWARNING
Do not put windshield washer fluid in the
container for the engine coolant.
%*
[SV22500(ALL)01/95]
Use specially formulated windshield washer
fluid rather than plain water, because specially
formulated washer fluids contain additives that
dissolve road grime. For safety reasons, washer
fluids containing an appropriate antifreeze such
as methanol should be used in freezing weather
File:15ctsve.ex
Update:Tue Sep 19 14:37:50 1995
Page 302 of 387
303
*
[SV23400(ALL)09/95]
If the blades do not wipe properly, clean both
the windshield and the wiper blades. Use
undiluted windshield washer solution or a mild
detergent. Rinse thoroughly with clear water. Do
not use fuel, kerosene, paint thinner, or other
solvents to clean your wiper blades. These will
damage your blades.
[SV23450(ALL)07/93]
Inspect the wiper arm pivots on a regular basis
to ensure that the wiper arms move freely.
Lubricate the pivot points if necessary.
[SV23475(ALL)08/93]
half page art:0070198-A
Wiper arm pivot points
[SV23500(ALL)03/95]
To make reaching the wiper blades easy, simply
turn the ignition switch to the ON position and
turn the wipers on. Wait for them to reach a
vertical position and turn the ignition to OFF.
Do not move the wipers manually. Manually
moving the wipers across the windshield may
damage them.
File:15ctsve.ex
Update:Tue Sep 19 14:37:50 1995
Page 386 of 387
Index 387
Wheels
anti-theft lugnuts........... 255
cleaning............... 312
covers................ 251
inspection and maintenance...... 306
lug nuts............... 251
replacement............. 309
Windows
manual windows, operating...... 172
power windows, operating...... 173
Windshield washer fluid and wipers
checking and adding fluid....... 301
checking and replacing wiper blades . . 302
liftgate reservoir........... 302
reservoir............... 301
specifications...........301, 349
Wrecker towing............. 257
File:ctixe.ex
Update:Tue Sep 19 15:00:54 1995