1995 PONTIAC BONNEVILLE Owners Manual

Shifting Into PARK (P)
Steering Column Shift Lever
1. Hold the brake pedal down with your right foot and
set the parking brake.
3a '60 km/h 140
II I I1
2. Move the shift lever into PARK (P) position like
this:
0 Pull the lever toward you.
2-24
ProCarManuals.com

0 Move the lever up as far as it will go.
3. Move the ignition key to LOCK.
4. Remove the key and take it with you. If you can
walk away from your vehicle with the ignition key in
your hand, your vehicle
is in PARK (P).
Console Shift Lever
1. Hold the brake pedal down with your right foot and
2. Move the shift lever into PARK (P) position like this:
set the parking brake.
0 Hold
in the button on the lever.
Push the lever all the way toward the front of the
vehicle.
3. Move the ignition key to LOCK.
4. Remove the key and take it with you. If you can
walk away from your vehicle with the ignition key in
your hand, your vehicle is in PARK (P).
2-25
ProCarManuals.com

Leaving Your Vehicle With the Engine
Running
If yon have to leave your vehicle with the engine
running,
be sure your vehicle is in PARK (P) and your
parking bralae is fdy set before you leave it. After
you’ve moved the shift lever into the PARK (I?)
position, hold the regular brake pedal down. Then, see if
you can muve the shift lever away from PARK (P)
without first pulling it tow& you (or, if you have the
console shift lever, without first pushing.the button). If
yuu c-an, it mema that the shift lever- w&snB t fully locked
into PARK (P).
Torque Lock
If you are parking on a hill and you don’t shift your
transaxle into
PARK (P) properly, the weight of the
vehicle may put too much force on the
parking pawl in
the transaxle. You may find it difficult to pull the shift
lever out
of PARK (P). This is called “torque lock.” To
prevent torque lock, set the parking brake and then shift
into
PARK (P) properly before you leave the driver’s
seat.
To find out how, see “Shifting Into PARK (P)” in
the Index.
When
you are ready to drive, move the shift lever out of
PARK
(P) before you release the parking brake.
If “torque lock” does occur, you may need to have
another vehicle
push yours a little uphill to take some of
the pressure from the transaxle. so you can pull the shift
lever out of PARK (P).
2-26
ProCarManuals.com

Shifting Out of PARK (P)
Your Pontiac has a brake-transaxle shift interlock. You
have to fully
apply your regular brake before you can
shift from PARK (P) when the ignition
is in the RUN
pition. See “Automatic Transaxle” in the Index.
If you cannot shift out of PARK (P), ease pressure on
the shift lever--push the shift lever all the way into
PARK (P) as you maintain brake application. Then
move the shift lever into the gear you want. If you ever
hold the brake pedal down but still can’t shift out
of
PARK (P), try this:
1. Turn the key to OFF. Open and close the driver’s
door to turn
off the Retained Accessory Power
feature,
if you have it.
2. Apply and hold the brake until the end of Step 4.
3. Shift to NEUTRAL (N).
4. Start the vehicle and then shift to the drive gear you
want.
5. Have the vehicle fixed as soon as you can.
Parking Over Things That Burn
2-27
ProCarManuals.com

Engine Exhaust Running Your Engine While You’re
Parked
It’s better not to park with the engine running. But if you
ever have to, here are some things to know.
2-28
ProCarManuals.com

Power Windows
Follow the proper steps to be sure your vehicle won’t
move. See “Shifting Into
PARK (P)” in the Index.
If you are parking on a hill and if you’re pulling a
trailer, also
see “Towing a Trailer” in the Index. Switches on
the driver’s armrest control each
of the
windows when the ignition is on or in retained accessory
power. In addition,
each passenger door has a control
switch for its
own window.
When the driver’s window switch
is held rearward for more
than a half second, the window will lower completely. The
window
can be opened in smaller amounts by pressing the
switch rearward and releasing
it immediately.
TO stop the window while it is lowering, press the
switch again, then release. To raise
the window, hold the
switch
forward.
2-29
ProCarManuals.com

Horn
You can sound the horn by pressing the horn s’ymbols on
your steering wheel.
‘Tilt Wheel
Turn SignaVMultifunction Lever
The lever on the left side of the steering column
includes your:
Headlamp High-Low Beam
0 Windshield Wipers
a Windshield Washer
Cruise Control (Option)
@ Turn Signal and Lane Change Indicator
The high-low beam feature is discussed under
“Headlamps”. See “Headlamps” in the Index.
A tilt steering wheel allows you to adjust the steering
wheel before you drive.
You can
also raise it to the highest level to give your
legs more room when you exit and enter the vehicle.
To tilt the wheel, hold the steering wheel and pull the
lever.
Move the steering wheel to a comfortable level,
then release the lever to
lock the wheel m place.
2-30
ProCarManuals.com

Turn Signal and Lane Change Indicator
The turn signal has two
upward (for right) and two
downward (for
left)
positions. These positions
I
allow you to signal a turn or
a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
A green arrow on the
instrument panel will flash
in the direction of the turn
or lane change.
To signal a lane change, just raise or lower the lever
until the green arrow starts to flash. Hold it there until
you complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don’t
flash but just stay on, a signal bulb
may be burned out
and other drivers won’t see your turn signal. If you have
the Driver Information Center, it will tell you
if you
have a burned out bulb. See “Driver Information
Center” in the Index.
If a bulb is burned out, replace it to help avoid an
accident. If the green arrows don’t go on at all when you
signal a turn, check the fuse and for burned-out bulbs.
See “Fuses and Circuit Breakers” in the Index.
2-31
ProCarManuals.com