1995 ACURA TL parking sensors

Description

The automatic transmission is a combination of a 3-element torque converter and a dual-shaft electronically controlled

automatic transmission which provides 4 speeds forward and 1 reverse. The entire unit is positioned in line with the engine.

Torque Converter, Gears and Clutches

The torque converter consists of a pump, turbine, and stator, assembled in a single unit. They are connected to the engine

crankshaft so they turn together as a unit as the engine turns. Around the outside of the drive plate is a ring gear which

meshes with the starter pinion when the engine is being started.

The entire torque converter assembly serves as a flywheel while transmitting power to the transmission mainshaft.

The transmission has two parallel shafts: the mainshaft and the countershaft. The mainshaft is in line with the engine

crankshaft. The mainshaft includes the 1st, 4th and 2nd clutches and gears for 4th, 1st, 2nd and reverse (3rd gear is integral

with the mainshaft). The countershaft includes the 3rd, 1st-hold and reverse clutches, and gears for 3rd, 4th, 1st, 2nd,

reverse and parking. The secondary drive gear is integrated with the countershaft. The gears on the mainshaft are in con-

stant mesh with those on the countershaft. When certain combinations of gears in the transmission are engaged by clutch-

positions.

and
es, power is transmitted from the mainshaft to the countershaft to provide

Electronic Control

The electronic control system consists of a Powertrain Control Module (PCM), sensors, a linear solenoid and four solenoid

valves. Shifting and lock-up are electronically controlled for comfortable driving under all conditions.

The PCM is located below the dashboard, under the front lower panel on the passenger's side.

Hydraulic Control

The lower valve body assembly includes the main valve body, the secondary valve body, the throttle valve body, the lin-

ear solenoid, the shift control solenoid valves and the ATF passage body. They are bolted on the lower part of the trans-

mission housing. The regulator valve body, the ATF pump body, and the accumulator body are bolted to the torque con-

verter housing.

The main valve body on '96 model contains the manual valve, the 1-2 shift valve, the 2-3 shift valve, the 3-4 shift valve, the

4-3 kick-down valve and the Clutch Pressure Control (CPC) valve. The main valve body on '97 model contains the manual

valve, the 1-2 shift valve, the 2-3 shift valve, the 3-4 shift valve, the 4-3 kick-down valve and the main orifice control valve.

The secondary valve body on '96 model contains the 3-4 orifice control valve, the 4-3 shift timing valve, the modulator valve

and the accumulator pistons.The secondary valve body on '97 model contains the 3-4 orifice control valve, the 4-3 shift tim-

ing valve, the line pressure control valve, the modulator valve and the accumulator pistons. The throttle valve body

includes the throttle valve which is bolted onto the secondary valve body. The linear solenoid is joined to the throttle valve

body. The regulator valve body contains the regulator valve, the lock-up shift valve and the cooler relief valve. Fluid from

the regulator passes through the manual valve to the various control valves. The ATF pump body contains the lock-up tim-

ing valve, the lock-up control valve and the relief valve. The torque converter check valve is located in the torque converter

housing under the ATF pump body. The accumulator body contains the accumulator pistons. The reverse accumulator and

the 1st-hold accumulator pistons are assembled in the rear cover.

The 1st, 1st-hold, 2nd and reverse clutches receive fluid from their respective feed pipes, and the 3rd and 4th clutches

receive fluid from the internal hydraulic circuit.

Shift Control Mechanism

Input from various sensors located throughout the vehicle determines which shift control solenoid valve the PCM will acti-

vate. Activating a shift control solenoid valve changes modulator pressure, causing a shift valve to move. This pressurizes a

line to one of the clutches, engaging the clutch and its corresponding gear.

er through a fluid passage, causing the lock-up piston to be held against the torque converter cover. As this takes place, the

mainshaft rotates at the same speed as the engine crankshaft. Together with hydraulic control, the PCM optimizes the tim-

ing of the lock-up mechanism. The lock-up valves control the range of lock-up according to lock-up control solenoid valves

A and B, and throttle valve. When lock-up control solenoid valves A and B activate, modulator pressure changes. The lock-

up control solenoid valves A and B are mounted on the torque converter housing, and are controlled by the PCM.

(cont'd)
Lock-up Mechanism

In
position, in 2nd, 3rd, and 4th, and
position in 3rd, pressurized fluid is drained from the back of the torque convert-ProCarManuals.com

Description

The automatic transmission is a combination of a 3-element torque converter and a dual-shaft electronically controlled

automatic transmission which provides 4 speeds forward and 1 reverse. The entire unit is positioned in line with the engine.

Torque Converter, Gears and Clutches

The torque converter consists of a pump, turbine and stator, assembled in a single unit.

They are connected to the engine crankshaft so they turn together as a unit as the engine turns.

Around the outside of the drive plate is a ring gear which meshes with the starter pinion when the engine is being started.

The entire torque converter assembly serves as a flywheel while transmitting power to the transmission mainshaft.

The transmission has two parallel shafts: the mainshaft and the countershaft. The mainshaft is in line with the engine

crankshaft.

The mainshaft includes the 1st, 2nd and 4th clutches, and gears for 4th, 2nd, 1st and reverse (3rd gear is integral with the

mainshaft, while the reverse gear is integral with 4th gear).

The countershaft includes the 3rd, and 1st-hold clutches, and gears for 3rd, 4th, 1st, 2nd, reverse, and parking. The sec-

ondary drive gear is integrated with the countershaft.

The gears on the mainshaft are in constant mesh with those on the countershaft.

When certain combinations of gears in the transmission are engaged by clutches, power is transmitted from the mainshaft

to the countershaft to provide and positions.

Electronic Control

The electronic control system consists of the Transmission Control Module (TCM), sensors, a linear solenoid and four

solenoid valves. Shifting and lock-up are electronically controlled for comfortable driving under all conditions.

The TCM is located below the dashboard, behind the glove box on the passenger's side.

Hydraulic Control

The lower valve body assembly includes the main valve body, the servo body and the shift control solenoid valves. They

are bolted on the lower part of the transmission housing.

Other valve bodies, the regulator valve body, the ATF pump body, the 2nd accumulator body, and the throttle valve body,

are bolted to the torque converter housing.

The main valve body contains the manual valve, the 1 - 2 shift valve, the 2 - 3 shift valve, the 3 - 4 shift valve, the 4th kick-

down valve, the 2 - 3 orifice control valve, the 3 - 4 orifice control valve, the 4th exhaust valve, the servo control valve,

and the main orifice control valve.

The servo body contains the servo valve, 3rd and 4th accumulator pistons.

The regulator valve body contains the regulator valve, the lock-up shift valve, and the cooler relief valve.

Fluid from the regulator passes through the manual valve to the various control valves.

The throttle valve body includes the throttle valve which is bolted onto the 2nd accumulator body. The 2nd accumulator

piston is assembled in the 2nd accumulator body.

The linear solenoid is joined with the throttle valve body.

The ATF pump body contains the modulator valve, the lock-up control valve, the lock-up timing valve, and the relief valve.

The torque converter check valve is located in the torque converter housing under the ATF pump body.

The 1st and 1st-hold accumulator pistons are assembled in the rear cover.

The clutches receive fluid from their respective feed pipes or internal hydraulic circuit.

Shift Control Mechanism

Input from various sensors located throughout the vehicle determines which shift control solenoid valve the TCM will acti-

vate. Activating a shift control solenoid valve changes modulator pressure, causing a shift valve to move. This pressurizes

a line to one of the clutches, engaging that clutch and its corresponding gear.

Lock-up Mechanism

In position, in 2nd, 3rd and 4th, and in position in 3rd, pressurized fluid is drained from the back of the torque con-

verter through a fluid passage, causing the lock-up piston to be held against the torque converter cover. As this takes place,

the mainshaft rotates at the same speed as the engine crankshaft. Together with hydraulic control, the TCM optimizes the

timing of the lock-up mechanism. The lock-up valves control the range of lock-up according to lock-up control solenoid

valves A and B, and throttle valve. When lock-up control solenoid valves A and B activate, the modulator pressure changes.

The lock-up control solenoid valves A and B are mounted on the torque converter housing, and are controlled by the TCM.ProCarManuals.com

Anti-lock Brake System (ABS)

Features/Construction (cont'd)

Wheel sensor:

The wheel sensor is a contactless type that detects the rotating speed of a wheel. It consists of a permanent magnet and

coil. When the gear pulsers attached to the rotating parts of each wheel turn, the magnetic flux around the coil in the

wheel sensor alternates, generating voltages with frequency in proportion to wheel rotating speed. These pulses are sent

to the ABS control unit, and the ABS control unit identifies the wheel speed.

WHEEL SENSOR

COIL PERMANENT MAGNET

at HIGH SPEED

at LOW SPEED

GEAR PULSER

GEAR PULSER

ABS control unit:

The ABS control unit consists of a main function, which controls the operation of the anti-lock brake system, and sub-func-

tion, which controls the pump motor and "self-diagnosis".

For safety, the main function consists of two systems, and the ABS control unit activates the solenoid valve only when the

outputs of the two systems agree with each other.

The main function section of the ABS control unit performs calculations on the basis of the signals from each wheel

sensor, and controls the operation of the anti-lock brake system by activating the solenoid valves in the modulator unit

for each front brake and for the two rear brakes. The ABS has individual control of the front wheels and common con-

trol ("Select low") for the rear wheels. "Select low" means that the rear wheel that would lock first (the one with the

lowest resistance to lock-up) determines the ABS activation for both rear wheels.

The sub-function section has the fail-safe function that monitors the system operation by inputting the brake switch,

parking brake switch and pressure switch signals, and stops the anti-lock brake system when it detects an abnormality

in the system. It also has a self-diagnosis function and the pump motor control function.

WHEEL SENSORS
ABS CONTROL UNIT

RIGHT-FRONT WHEEL

LEFT-FRONT WHEEL

RIGHT-REAR WHEEL

LEFT-REAR WHEEL

BRAKE SWITCH

PARKING BRAKE SWITCH
MAIN FUNCTION

• BASIC ABS

FUNCTION CONTROL

SUB-FUNCTION

• SELF-DIAGNOSIS FUNCTION

• FAIL-SAFE FUNCTION

• PUMP MOTOR CONTROL

PRESSURE SWITCH

PUMP MOTOR RELAY
MODULATOR UNIT

SOLENOID

SOLENOID

SOLENOID

FRONT FAIL - SAFE RELAY

REAR FAIL - SAFE RELAY

PUMP MOTORProCarManuals.com