10. '97 - 98 models: Route the wire harness of the new
actuator through the shaft hole. Assemble the actu-
ator and the mirror visor by installing the screws.
11. '97-98 models: Attach the actuator to the mirror by
pressing it into place by hand.
12. Route the harness through the hole in the mirror
base, and reinstall the mirror housing on the mirror
base.
MIRROR BASE
MIRROR HOUSING
13. Reinstall the harness clamp and the mirror base
cover removed in step 2, and tape the harness clip
to the wire harness 145 mm (5.7 in) from the mirror
base cover.
145 mm
14. Insert the terminals into the connector(s) as shown
below, then reconnect the connectors, and reinstall
the mirror to the car.
POWER
MIRROR
2P CONNECTOR
(Canada only)
3P CONNECTOR
3P CONNECTOR: WIRE SIDE OF FEMALE
TERMINALS
*1: '95 -96 models
*2: '97 -98 models
2P CONNECTOR: TERMINAL SIDE OF MALE
TERMINALS
(Canada and '98 USA)
( ): Right side
15. Test the mirror for smooth movement in all direc-
tions.ProCarManuals.com
