8-190 ACCESSORY; - Cigarette Lighter
CIGARETTE LIGHTER
REMOVAL AND INSTALLATION NOEMJAE
Removal steps
1. Knob
2. Plug
3. Center panel
4. Plug
5. Nut
6. Socket
7. Outer case
8. Cigarette lighter bracket NOTE
Reverse the removal procedure to reinstall.
16W1555
INSPECTION
l Take out the plug, and check for a worn edge on the
element spot connection, and for shreds of tobacco or
other material on the element.
l Using an ohmmeter, check the continuity of the element.
l Confirm that there is no dirt on the surface of the socket.
CAUTIONS FOR USE OF THE CIGARETTE LIGHTER SOCKET
AS AUXILIARY POWER SOURCE
1. When using a “plug-in” type of accessory, do not use
anything with a load of more than 120W.
2. It is recommended that only the lighter be inserted in
the receptacle.
Use of “plug-in” type accessories may damage the
receptacle and result in poor retention of the lighter.
NOTE
The specified load should be strictly observed, because
overloaded cord burns the ignition switch and herness.
1 STB Revision
