Downloaded from www.Manualslib.com manuals search engine SEcnON 1
BEFORE DRIVING YOUR MONTE
CARLO
DRIVER DAILY CHECKLIST
Be sure you know your vehicle and its equipment and how to use it safely .
Before Entering the Vehicle '
1. See that windows, mirrors and lights are clean and unobstructed.
2. Check whether any tire is low or flat (H any tire ,looks different from
normal,
we recommend you check it with a tire pressure gage.)
3. Look for fluid leaks.
4. Be sure everything is properly stowed.
5. Check the area behind the vehicle ~ you are about to back up.
Before Driving Off
1. Lock all doors .
2. Adjust the seat and movable head restraints, if so equipped .
3. Adjust inside and outside mirrors.
4. Fasten seat belts.
5. Check that all the warning lights work as the ,key is turned to "Start."
6. Check all gages (including the fuel gage).
7 . Release the parking brake
(and see that the "Brake" light turns off).
See related topics in this manual , or the Maintenance Schedule folder, il
~" problems are found.
Guard Against Theft
For tips on how to protect your vehicle and its contents, see "'Starting and
Operating," Section 2 of this manual.
KEYS
Two different keys are provided for the locks on your vehicle. The key code is
stamped
on the "knock-out" plug in each key head.
• Key withsquar, head -for ignition lock only .
'IDENTIFYING
IGNITION LOCK DOOR LOCKS & ALL OTHER LOCKS
• Key with oval head -for all other locks.
1-1
Downloaded from www.Manualslib.com manuals search engine For vehicle security:
• RecoId the key code IlUIT1b8rs, then lmock the plUQ$ out of the keys .
• Keep the key. codes In a sale place(SU<;h as your wallet) , NOT IN THE
VEHIClE.
Stamped on the key is a letter indicating the proper key blank needed if
duplicates are required . .
If the original keys are lost, duplicates can be made using the key ~s,
Co,nlaet any GM dea,lerora locksmith.
If you park in an atteOOadlOt , leave only your square -head ignition key.
Lock your
glove box and take the oval-head key w~h you. This will help
prevent illegal entry into the glove box (if locked) and trunk compartments .
DOOR LOCKS
•• Bo,th .dQQrs can be locked , from the inside by depressing the passenger guard
door lock ' buttons located on the upper door panel. The doors can be locked
from the outside by first depressing the door lock button and closing the door.
The doors can
also be locked by USing the oval-head key.
All models
have as a standard Safety feature overriding . door locks. When the
doors are locked, the door latch mechanism is inoperative, preventing
inadvertent opening of the
door by movement 01 the inside handle .
Power Door Locks
The optionally available power door locks allow you to lock or unl""k your
.... .
;., .. 2~rs by operating the switch marked LOCK located on either door panel. The auton ratiC' ·locking mechanism does not interfere wjthmanual operation . of any
door
lock button. The, doors will not unlock or open with the inside door handle when the lock button is depressed , but can be unlocked individually by Ufting the lock button. .
CAUTION: To help IHlen the chance and /or severity of Injury in an accident , ~IW'ya Ioek'-the doora when drivinv. Along with uSing the aelt beltl properly, locking the doors, etC~1 helps prevent occupants from being thrown from the vehicte during accident •. It also, helP. prevent unintended opening of the doors I'nd help.' keep out intruder. \jVMn the vehi,cle is stopped.
STOWING THINGS IN (OR ON) THE CAR
CAUTION: , Luggage or other cargo shouId-not be piled higher than the SHtbllc::k& . When at all poss6bIe, luggage or cargo should be c.n.d in the trUnk. The filler panel In front of the rew window should, not be used to cerry objects-even those thlit are small and light. AU items shoukj M secured in place. 'This will help 'keep such things from
being thrown about al1~, injuring people, In the car dUrl,ng a sudden maneuver or an, accident. Cargo weight" 'whether , Inside or on the root, ahould be positionecl as far forward as possibl8~ .
Manual Window Control
Turn manual window conlrol clockwise " to raise right windows and
counterclockwise to raise lell windows . Reverse direction to lower window .
1-2
Downloaded from www.Manualslib.com manuals search engine Power Windows (OptIonal)
Power windows have an ignition interlock SO the windows cannot be operated
unless the Ignition switch is in the "RUN" poSition A master control for all
windows is provided at the driver's position. Individual switches are provided
under each
window for passenger use.
INSIDE REARVIEW MIRROR
The mirror can be adjusted up, down or sideways to obtain the best v.iew to
the front and rear. Move the mirror lever to the night position to reduce glare
from the headlights of vehicles behind you.
OUTSIDE REARVIEW MIRROR
Adjust the outside mirror so you can just see the side of your vehicle in the
portion 01 the mirror clo§!tsu.o .. the vehicle. This helps youdetermirie your
relation to objects seen in the mirr or:" .
CONVEX MIRROR
YoUr vehicle may have an optional convex outside rearview mirror. (A convex
mirror has a
cu
vehicle in the portion of the mirror closest to the vehicle. Thi s type
of mirror is designed to give a much wider view to the rear. especially of the
lane next to your vehicle . This may be most helpful when you want to change
lanes , or in some cases when you want to back up. Ho_ver, cars and other objects seen in a convex mirror will· LOOK smaller and appear farther
away than when seen
in a flat mirror. Therefore, use care when judging the
size or distance of a car or object seen in this convex mirror. Use your inside
mirror (or
glance rearward) to determine the size and distance of objects seen
in the convex mirror.
SEAT CONTROLS
ADJUSTMENT OF SEAT POSITION
Manually Operated Front Seats
The front seats may be adjusted forward or rearward by moving the control
lever at the front Of the seat to the left and exerting slight body pressure in the
direction desired.
The seat is locked in position when the lever is released .
1-3
Downloaded from www.Manualslib.com manuals search engine -_. .••.• ,-.1., ...... ,.,--.-
Restraint Of Pregnant Women
General Motors urges that pregnant women use a lap-shoulder belt whenever one is present. This will help lessen the chance of a pregnant woman and her
unborn
chil .d being injured andlor will help reduce the severity of their injury in an acc ident. The tap belt should be used alone if a shoulder ben is not present
7: such as in a rear ·seat. In eitlJer case, the lap belt should be worn as low and snug over th.(hips a! f possible , as advised for regular seat belt use (see
the .preced i
ng instructions) .
SEAT BELT LIGHT/BUZZER REMINDER
,.".,." ·;t "W h'eii '1hI>'key ·is .turned to "AUn" or "Start ," a remi!)der IightilLdesigned to
corne
on for four to eight secondS,." is to remind riders to fasten their seat
. belts.
•
If the driver's seat belt has not been buCkled. before turning the key to "Aun " or "Start ", a b uzzeri. diiSigned to sOund for four to eight seconds
(or
until buckled) as a reminder.
~ the seat belt or reminder system does not work as descri~. see your dealer
tor service.
Lap Belts For Rear Seat (And Center Front Seat) Passengers
• Aear seat lap belts next to side windows have retractors which are
designed to take . up extra webbing.
• In a single motion, pull the rear seat outboard lap ben across your lap lar enough to push the latch plate Into the buckle, until it clicks . If the belt is
not
pulled outter enough to reach the buckle , let the lap belt rewind fully
into its retractor . This .unlocks it so the belt can be pulled out to the proper
length .
• These belts should be positioned , worn and released as described -above under "Front Seal LapoShouider Belt ." After fastening , check that the belt
is
SNUG by pulling the belt firmly across your lap toward the lap belt retractor . This will allow the retractor to take up slack.
• Lap belts at center seats also should be positioned, worn and released as described above : however, they do not have retractors . They should be
adjusted to a SNUG FIT by pulling on the end of the belt coming from the
adjustable latch plate.
Downloaded from www.Manualslib.com manuals search engine The GM Child Love Seat is not recommended for use in the center front
seating position of this vehicle because it may Interfere with quick access
to all front seat belt buckles in an emergency.
To make it easier
to install a GM Child Love Seat in the rear seat of this
vehicle, at least one pre- drilled hole for the top strap anchor bracket has been
provided in the filler
panel between the rear seat and the rear window . It will be
necessary to pierce the trim panel (covering the metal panel Itself) with a hole
that corresponds
to the pre-drilled hole. T 6 find the hole, enter the trunk and
examine the underside of the filler panel. See the booklet that comes with the
Child
Seat for details on locating and mounting the top strap anchor bracket.
When the child
Seat is placed in the car, use the seating position most directly
in front of the anchor bracket and secure the seat using the top strap and the
car lap belt. In using any infant or child restraint system, be sure to read and
follow all instructionsoninstatlatlon and use that come with .the restraint
system.
When not in
use, leave the Love Seat, or other infant or child restraint system,
in place
and restrained by the car's seat belt. If that is not possible, store the
restraint in the trunk to help keep it from being thrown about and injurying
people in the car during a suddlen maneuver or an accident.
Children
small enough for the GM Infant or Child love . Seats described
above, or other such infant and child restraints, should be restrained by
such means IF AT ALL POSSIBLE. Although the following measures may
lessen the chance
andlor severity of injury fn an accident or suddlen maneuver
for such
small children , they simply cannot do SO to the dlegree that specially designed child restraints can. Take care as follows ~ a child is ricing in the
vehicle without a General Motors
(or other) infant or child restraint system:
1 . Infants who cannot sit
up· by . themselves should be restrained by placing
them in
a· bassinet, preferably cQvered and padded. Place it crossways in
the vehicle (widthwise) on the rear seat.
The bassinet should be securely
restrained with the vehicle 's regular seat belts. Another method is to place
the bassinet
so that iI rests against the back of the driver 's seat. again
crossways
in the vehicle .
1-11
Downloaded from www.Manualslib.com manuals search engine SECTION 2
STARTING AND OPERATING
ENGINE EXHAUST GAS CAUTION
(CARBON MONOXIDE)
Do not breathe exhaust gas because it contains carbon monoxide, which by
itself has no color or odor. Carbon monoxide is a dangerous gas. It can cause
unconsciousness and can be lethal.
If
at any time you think exhaust fumes are entering the vehicle, have the cause
determined and corrected
assdon.as possible. If you must drive under. lhese conditions , drive only wilh All windows fully OPEN .
To allow proper operation of your vehicle's ventilation system, keep the.air inlet grille in front of the windShield clear of snow, leaves or other obstructions at all
times.
Protect against carbon monoxide entry into the vehicle body . The best way is to keep the engine exhaust system, vehicle body and body ventilation system
properly maintained. We recommend that the exhaust system and body be inspected by a competent lechniclan :
•
each time the vehicle is raised for an oil change;
• whenever a change is noticed in the sound of the exhaust system;
• whenever the exhaust system, underbody or rear of the vehicle is damaged or. becomes corroded .
See your Miiintenance Schedule folder for parts recuiring inspection.
To allow proper operation of your vehicle's ventilation system, keep the air inlet
grille
in front of the windshi~1d clear of snow, leaves or other obstructions at all
times.
Do not perk or idle this vehicle for more than 10 minutes with the ventilation
system control switch in the "off" position while the engine is running . Even
with
the ventilation system on, running the engine while parked is not recommended . Entry of carbon monoxide into the vehicle body is possible with
a
poorly repaired , damaged, or corroded exhaust system or body.
Do
not run the. engine in CONFINED areas (such as garages or next to a
building) any more than needed to move the vehicle . When Ih.e vehicle has to be stopped in an UNCONFINED area with the engine running for any more
than a few minutes, take the following stepa :
A. Adjust the heating
or cooling ' system to force outside air into the vehicle as
follows:
1. On vehicles not ecuipped wijh air condijioning, set the fan to medium or high speed and the upper control lever to any position except
"Off."
2. On vehicles ecuipped with air conditioning , set the fan to medium or
high speed and the upper control lever to any position except "Off" or
"Max., "
B . Keep the exhaust tailpipe area clear 01 snow and other material to help
reduce the
buildup 01 exhaust gases under the vehicle.
Downloaded from www.Manualslib.com manuals search engine The trunk lid should be closed while driving to help prevent drawing exhaust gas into the vehicle. If the trunk must remain open for some reason while
moving . or ff electricai wiring or other cable conneclionS to a trailer must pass through the sealbelweeri the trunk lid and the body, follow these precautionS :
• Close all windows.
• Adjust the heating or cooling system to force outside air into the vehicle as
described above. but set the fan to high speed .
• On vehicles with outside ' air vents in or under the instrument panel ; open
the vents
fully.
NEW VEHICLE "BREAK-IN" PERIOD
You can drive your new vehicle from its very first mile/kilometer without
following a formal "break-in" schedule. However. there are things you can do during the first few hundred miles/kilometers of driving . that will add to the
future performance and economy of your
vehicle. We recommend you limit
your speed during the first 500 miles (800 kilometers) to a maximum of 55 mph (90 km /h) ; but do not drive for long periods at anyone constant speed. either
fast or
slow. During this time. avoid full throttle starts and. if possible. avoid
hard stops especially during the first 200 miles (320 kilometers) of driving .
Always drive at moderate speed until the engine has COfl'4lletely warmed up.
If you plan to use your new vehicle for trailer towing . see additional information
under " Trailer Towing" in Section 1 of this manual.
GUARD AGAINST THEFT
y~~; '~ew Monte carlo has many features to help prevent theft of the vehicle
itself.
its equipment. and its contents. But these anti-theft features depend
upon you to work.
THE
TIME TO BE MOST ON GUARD ISWHEN LEAVING THE VEHICLE ...
• PARK IN A LIGHTED SPOT WHEN YOU CAN AND FULLY ClOSE BOTH WINDOWS AND ANY ROOF PANaS
• LOCK THE STEERING COLUMN AND TAKE THE KEYS:
•
Turn the key to "Lock " and remove the key. This locks the ignition
and both steering and shift controls.
• If you must leave a kilY with the vehicle . leave the square-head key only. Take the oval· head key with you. This will help prevent unwanted
entry into your
vehicle at a later date . or into your glove box (if locked) or trun k
• LOCK ALL DOORS .
•
KEEP ITEMS OUT OF SIGHT AND LOCKED UP WHEN POSSIBLE.
• Never leave things of va lue in plain sight on seats or floor.
• The glove box otTers a place to hide small item s and if locked, protects even better.
• Lock larger item s in the trunk.
Downloaded from www.Manualslib.com manuals search engine Steady Cruising Speeds
Once you reach cruising sPeed, keep as steady a speed as road and traffic will allow . Speeding up and slowing down lessens your vehicle's efficiency and uses more fuel.
Stop-And-Start Driving
Frequent stops and starts while driving cut down on your miles per gallon
(kilometers per liter) . Plan even your short shopping trips to take advantage of
through streets to avoid traffic lights. Pace your driving
like the expert drivers
to avoid unneeded stops and braking .
Sudden Stops
Sudden stops can also waste fuel; instead of moving the vehicle, the energy of fuel is wasted as heat in braking. Energy in the fOrm of fuel is also needed to
accelerate
baCk to driving speed.
Excessive Idling
An idling engine uses fuel, too .. If you're faced with more than a minute wait,
and you're not in traffic , it may be better to turn off the engine and start again
later.
Lubricants
A well-lubricated vehicle means less friction between moving parts. See the Maintenance Schedule folder for the proper lubrication intervals.
Air Cleaner
Your vehicle receives its power from a mixture of fuel and air. The air enters
the engine through the air cleaner. A dirty air cleaner element lessens engine
perfOrrnance and can waste/Uel. ,So, it's important to replace the air cleaner
element (filter) at the intervals in Section C of the Maintenance Schedule folder .
Wind Drag
Open windows at high speeds cause "wind drag" which can lessen fuel
economy. Also, fuel economy is less when driving in crosswinds or headwinds .
To
help offset some of this loss, slow down when driving in these conditions.
Air Conditioner
" your vehicle has an optional air conditioner , use the "Economy, " ("Vent" or
"Heater") positions whenever possible. The air conditioner compressor, is not on in these positions and the reduced ,'engine-load can improve fuel economy.
Engine Maintenance
An engine that i. properly maintained ."iill provide better fuel economy than one
that is no\.
One misfiring spark plug will cut .fuel economy quite a bit, and will make a difference in the amount of pollution emitted from yOur vehicle.
Exces~ Weight
Fuel economy is related to the work. the engine must do. The heavier the load,
the more fuel it takes to run your vehicle. Keep weight to a minimum by taking
out any luggage or cargo when it is not needed.
2-5
._ - ---_._---'----