Downloaded from www.Manualslib.com manuals search engine CAUTION': It" the alr 'l;lMner i, ren;oveci during repair or maintenance, bel"'re to put H bl,ck on'eQr~ctly. It the air cleilner Is 'not correctly Inltalled. there could bea fire in the engine compertment (It there ~Id h..,.,en to be a backfire) , or other engitie mallunc1lon .
Front Suspension and Steering Linkage
Lubric;lte fi tngsatlhEj ' intery;>1 showninthe Maintenance Schedule with water
resistant
EP Chassis lUb(icantwhich meets GM SpecifICation 6031M.
NOTICE: ,Ball ' joints, should "not be . lubrieak.d unlesS, their temperature il -12"C (10"f},or higher,During ,coldweather, theyahould" .. ~"al,)c)~ to,warm up al nece ... ry ,before being lubricated or damttge to the baH jOint-Could occur. . , ' '.' "
.. ,. fIRnl 'N. c~~~arings
Clean and repack front wheel bearings with a high melting point wheel bearing
lubricant . at the interval shown in the Maintenance Schecule. Use wheel
' bearing lubricant GM Part No. 10 5~ 344 or equivalent.
NonCE: ," Long fiber " or "vbeou.'-' type"iubricenf ~kI nol be used, Do not mix wheel ~irinQ"lUbricant., Be sure to thoroughly c5aan bearings and hubl of all old lubricant before repacking.
Tapered roller,bearings uaed'h'Hhis 'veh icle have' .. sUghtly looSe teel when properly adjusted, They must never ~ over tightened (preJoaded) or sev .... bearing damage may resuit. Con.utt your,Authorized Deektr or Servi<:e.r.enual tor peper detailed adjustment procedures and specifications. . '~". :...,"" .... ~"";~f>"'~"'-"'''''',','',' ,::, Hood tlltchesand.Hood Hinge
At the interva l shown in the Maintenan ce Schedule lubricate hood latch
assembly
and hood hinge assembly as follows :
1. Wipe off any accumul"ti~!).ofqirt Qfoontaminationon latch Pi1!'ts.
2. Apply Lubriplate . or equivalent to latch pilot bolts and latch locking
plate .
3. Apply light engine oil to all pivot paints in release mechanism, as well
as primary and Secbndary latch mechanisms.
4. Lubricate hood hinges .
5~ Make hood hinge and latch mechanism functional check to assure the assembly is working COfTectiy.
Freedom Battery
Your new vehicle has a Delco FREEOOM battery. It neecs . no periodic
maintenance .
Its top is permanently sealec (except for two small vent holes) and has no filler capS. You will never have to add water.
The hydrometer (test indicator) in the top of the battery provides information for
testing purposes only.
For full power needs at replacement time, a Delco battery wijh the same catalog number as shown on the original battery's labe l is recommended ..
CAUTIQN: ",' FOllOW the precautions listed in the' Jump Starting ' 'Caution (see ' Ihe "In Case of EmergenCy " settlon of this manual) when workmg On or 08. a bMtery. Personal Injury {particularly to eyea} or 'property damage may result from battery e~ battery acid, or electrical (short circuit) burns.
5-10
