Downloaded from www.Manualslib.com manuals search engine • Firmly apply the parking brake. Do not use ·the transmission as asubsmute for the parking I)rake.
•
Move the automatic transmission shift lever to "P"(Park).
•
Turn the key to "Lock ."
•
Remove the key (the · buzzer is designed to remind you).
• Lock all doors .
TURN SIGNAL AND HEADLIGHT BEAM LEVER
The turn signal lever on the left side of the steering column also controls
headlight low-beam and high-beam and the optional Cruise Control. (For Cruise Control operation, see page 2-12.)
• Turn Signal -Move the lever up to the second stop to signal a right turn.
Move it down to the second stop to signal a left turn. When the turn is
completed, the signal will cancel and the lever will return to horizontal.
• Lane Change Signal -In some turns, such as changing lanes, the steering wheel is not turned far enough to cancel the turn signal . ·For convenience,
you can flash the turn signal by moving the lever part way (to the first stop)
and holding it there. The lever will return to horizontal when you release it.
TURN SIGNAL MOVE UPWARD -R.H. TURN MOVE DOWNWARD -l.H. TURN
I LANE CHANGE I MOVE UPWARD TO
HEADLIGHT BEAM CHANGER (HEADUGHTS ON)
PUtl LEVER TQWARDYOU
l$T STOP-CHANGE FROM LEFT TO 'RIGHT lANE
MOVE DOWNWARD TO 1ST STOP-CHANGE FROM RIGHT TO LEFT LANE
A green light on the instrument panel is designed to flash to tell, you that the
lront and rear turn signal lights are working . If the light stays on, but does not
flash, check for burned-out turn signal bulbs.
If the green light does not come on when you move the lever, check the fuse and indicator bulb. However, if
you ordered a traiter towing option in which extra wiring was added to attach
the
trailer lighting, a different type'of flasher was installed. In tliis case, the
green light will continue to flash even if a turn signal bulb bUrns out. Therefore ,
you must
regularly look at the front and rear turn signal lights to be sure they
are working.
• Headlight Beam Changer -With the headlights on, pull the lever toward
you until you hear a click, then release it. The lights will change from Iow
beamto high-beam or from high-beam to low-beam . When the hig~-beams
are on, a blue light will appear on the instrument panel.
CORNERING UGHTS
The front fender cornering lights operate in conjunction with the turn signals.
When the turn signal is operating in either direction, and the headlights or
parking
lights are on, the corresponding cornering light emits a steady
sideward beam to provide additional illumination .
2-7
