Downloaded from www.Manualslib.com manuals search engine Front Wheel Bearings 
Every 24,000 miles-clean  and 
repack  with a high  melting  point 
wheel  bearing  lubricant. 
Use wheel 
bearing  lubricant 
GM Part No. 
1051344 or equivalent.  This is a 
premium  high melting  point 
lubri
cant. When  replacement is neces
sary specify  Delco parts. 
c. AUT .I . O .. N. : ."LO .. ng . fibre" ... ot"vi.SC .. 0USI' .. ty .pe 
lubricant . sho.uld . not  be.used. DO not . mix wheel bearing lubricants. Be sure to thoroughlyclean bearings and hubs(jf all old lubricant  betore repac/dng . 
Brakes 
Brake linings  should be periodi
cally inspected  for wear  by a quali
fied  technician.  The frequency  of 
this  inspection 
depe:pds upon driv
ing  conditions  such as traffic or 
terrain,  and also  the driving 
tech
niques  of individual  owners. Your 
Chevrolet  Dealer 
is best qualified 
to  advise  you 
as to how  often  this 
inspection  should be performed.  When 
replacement 
is required, 
specify  GM and Delco  parts. 
Master Cylinder -Every 6,000 
miles or 4 months  -Check  fluid 
level 
in each  reservoir  and main
tain ~" below lowest  edge of each 
filler  opening  with Delco 
Supreme 
No. 11 or DOT-3 hydraulic  brake 
fluid . 
Parking  Brake Pulley, Cables 
and Linkage~Every 6,000 miles 
or  4 
months-Apply water resist
ant  EP Chassis  Lubricant  which 
meets  GM Specification 
6031 M, to 
parking  brake cable at cable  guides 
and  at all  operating  links and levers. 
Standard  Steering Gear 
The steering  gear is factory
filled with steering  gear lubricant. 
Seasonal change  of this  lubricant 
should  not be performed  and the 
housing  should not be 
drained-no 
lubrication  is required  for the  life 
of the steering  gear. 
Every 36,000 miles,  the gear 
52 
should  be inspected  for seal leak
age  (actual  solid grease-not just 
oily  film). 
If a seal is replaced or 
the  gear is overhauled,  the gear 
housing  should be refilled  with 
Part  No. 
1051052 (13 oz. con
ta iner ) Steering  Gear  Lubricant 
which  meets GM Specification  GM 
4673M,  or its  equivalent. 
NOTE: Do  not  use EP, Chassis 
Lube,  meeting  GM Specification 
GM 
6031 M , to  lubricate  the gear. 
DO  NOT OVER-FILL the gear 
housing. 
Power  Steering  System 
Check the fluid  level  in the 
pump  reservoir  at each  oil change 
period.  Add GM Power  Steering 
Fluid  (or 
DEXRON®-II  or DEX
RON® Automatic Transmissiol1 
Fluid) as necessary  to bring  level 
into  proper  range on filler  cap 
in
dicator  depending  upon fluid tem
perature.