Page 503 of 687
Jack
To r e m o v e t h e j a c k
1. Remove the luggage board.
2. Remove the cargosub-compartment.
3. Turn the wing bolt and jack screwcounterclockwise.
1. Wing bolt
2. Jack screw
To s e c u r e t h e j a c k
1. Insert the wing bolt into the jack
with the jack screw pointing to the
right side and turn the wing bolt
clockwise to temporarily tighten it.
2. Tighten the jack screw clockwise.
1. Wing bolt
2. Jack screw
3. Turn the wing bolt completely to secure the jack.
Maintenance
Always keep the jack clean.Make sure the moving parts are kept
free from dirt or rust.
Make sure the screw thread is
adequately lubricated.
Other Equipment
Spare Tire and Tool Storage
7-76
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 505 of 687
NOTE
Extra strength may be required to
uncouple the connector. Be sure to
squeeze the tab firmly.
4. (Vehicles with sub-woofer)
Turn the spare tire hold-down bolt
counterclockwise and remove the
sub-woofer and the spare tire.
(Vehicles without sub-woofer)
Turn the spare tire hold-down bolt
counterclockwise and remove the
spare tire.
NOTE
If the spare tire hold-down bolt
cannot be loosened, hold the edge
of the tire and turn it
counterclockwise until the spare
tire hold-down bolt rotates.
To secure the spare tire
Store the spare tire in the reverse order
of removal. After storing , verify that the
spare tire is stored securely.
Other Equipment
Spare Tire and Tool Storage
7-78
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 506 of 687

8What to Do in Case of Emergency
In Case of Emergency................ 8-4Dealing With an Accident....... 8-4
When Towing is Required...........8-5 Having the Vehicle Towed...... 8-5
Using the Towing Hooks......... 8-6
Key Does Not Operate............... 8-8 Canceling the Key Temporary
Suspension Function.............. 8-8
Unlocking Using the Auxiliary
Key....................................... 8-8
Starting the Hybrid System with a
Dead Key Battery................... 8-9
Engine Does Not Start.............. 8-11 Taking Action with Depleted
Lead-acid Battery................. 8-11
Starting a Flooded Engine..... 8-15
Charging Is Not Possible.......... 8-16 Dealing with the Cause........ 8-16
Hybrid System Cannot be
Stopped................................. 8-17 Forcibly Stopping the Hybrid
System................................ 8-17
Problem With the Brake System (Foot
Brake)....................................8-18 Applying the Emergency
Brake.................................. 8-18AUTOHOLD Cannot be
Canceled............................... 8-19Forcibly Canceling the
AUTOHOLD........................ 8-19
Overheating........................... 8-20 Ta k i n g A c t i o n w i t h
Overheating........................ 8-20
Tire is Punctured or Bursts........ 8-22 Changing a Flat Tire (With Spare
Tire).................................... 8-22
Liftgate Cannot Open.............. 8-30 Open the liftgate from the
luggage compartment.......... 8-30
The Power Windows Cannot Be
Operated............................... 8-31 Initializing the Power
Window.............................. 8-31
The Panorama Sunroof Cannot Be
Operated............................... 8-32 Initializing the Panorama
Sunroof............................... 8-32
The Moonroof Cannot Be
Operated............................... 8-33 Initializing the Moonroof...... 8-33
8-1
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 508 of 687

KEY Indicator Light (Green)
(Flashing)............................ 8-54
Wrench Indicator Light......... 8-55
Warning Sound is Activated...... 8-56 Lights-On Reminder............. 8-56
Ve h i c l e Po w e r N o t S w i t c h e d O F F
Reminder Warning Sound.....8-56
Key Removed from Vehicle
Warning Sound.................... 8-57
Key Left-in-Vehicle Warning
Sound................................. 8-57
Key Left-In-Luggage
Compartment Warning Sound
(Vehicles With Advanced Keyless
Function)............................ 8-58
Door Lock Inoperable Warning
Sound................................. 8-58
Power Liftgate Warning Sound
*.....
.......................................... 8-59
Brake System Warning
Sound................................. 8-59
Brake Override Warning
Sound................................. 8-60
Electric Parking Brake (EPB)
Warning Sound.................... 8-60
Vehicle Problem Warning
Sound................................. 8-61
Shift Position Warning
Sound................................. 8-61
Selector Lever Not in P Reminder
Warning Sound.................... 8-62
Reverse Position Warning
Sound................................. 8-62
Door-Ajar Warning Sound ...........
.......................................... 8-63
Battery Saving Mode Warning
Sound................................. 8-63
If the Vehicle Becomes Stuck.... 8-64 What to do when the vehicle is
stuck................................... 8-64
*Some models.8-3
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 513 of 687
Canceling the Key
Te m p o ra r y S u s p e n s i o n Function
If a key is inside the vehicle, its
functions might be temporarily
suspended to prevent theft.
In this case, press the unlock button on
the suspended key in the vehicle to
restore the functions.
Unlocking Using the
Auxiliary Key
1. Remove the cover while pressingthe knob.
2. Remove the auxiliary key.
3. Insert the auxiliary key while pulling
the driver’s door handle.
4. Turn the auxiliary key.The door is unlocked.
5. Attach the auxiliary key to itsoriginal position.
What to Do in Case of Emergency
Key Does Not Operate
8-8
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 527 of 687

Changing a Flat Tire (WithSpare Tire)
NOTE
If the following occurs while driving , it
could indicate a flat tire.
Steering becomes difficult.The vehicle begins to vibrate
excessively.
The vehicle pulls in one direction.
If you have a flat tire, drive slowly to a
level spot that is well off the road and
out of the way of traffic to change the
tire.
Stopping in traffic or on the shoulder
of a busy road is dangerous.
WARNING
Do not install the temporary spare tire
on the rear wheels (driving wheels).
Driving with the temporary spare tire
on one of the rear driving wheels is
dangerous. Handling will be affected.
You could lose control of the vehicle,
especially on ice or snow bound roads,
and have an accident. Move a regular
tire to the rear wheel and install the
temporary spare tire to the front.
Be sure to follow the directions for
changing a tire.
Changing a tire is dangerous if not
done properly. The vehicle can slip off
the jack and seriou sly injure someone.
No person should place any portion of
their body under a vehicle that is
supported by a jack.
Never allow anyone inside a vehicle
supported by a jack.
Allowing someone to remain in a
vehicle supported by a jack is
dangerous. The occupant could cause
the vehicle to fall resulting in serious
injury.
NOTE
Make sure the jack is well lubricated
before using it.
1. Park on a hard, level surface off the
right-of-way and firmly set the
parking brake.
2. Shift into Park (P) and turn off the
engine.
3. Turn on the hazard warning flasher.
4. Have passengers get out of the
vehicle and away from the vehicle
and traffic.
5. Remove any luggage, the jack (page
7-76), spare tire (page 7-77), and
tools.
1. Lug wrench
2. Jack lever
6. Block the wheel diagonally opposite the flat tire. When
blocking a wheel, place a tire block
both in front and behind the tire.
What to Do in Case of Emergency
Tire is Punctured or Bursts
8-22
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 528 of 687

NOTE
When blocking a tire, use rocks or
wood blocks of sufficient size if
possible to hold the tire in place.
Removing a Flat Tire
WARNING
When jacking-up a vehicle, always
shift the selector lever to P position,
apply the parking brake, and place
wheel blocks in the position
diagonally opposed to the jack.
Changing a flat tire without using
wheel blocks is dangerous because the
vehicle may move and fall off the jack
even with the selector lever is in P
position, which could result in an
accident.
1. Loosen the lug nuts by turning them counterclockwise one turn each,
but do not remove any lug nuts
until the tire has been raised off the
ground.
NOTE
If your Mazda is equipped with the
optional antitheft wheel lug nuts, a
special key must be used to unlock
the locking lug nut for each wheel.
For details, refer to “Locking Lug
Nuts” below.
2. Place the jack on the ground.
3. Turn the jack screw in the direction shown in the figure and adjust the
jack head so that it is close to the
jack-up position.
4. Place the jack under the jack-upposition closest to the tire being
changed with the jack head
squarely under the jack-up point.
5. Continue raising the jack headgradually by rotating the screw with
your hand until the jack head is
inserted into the jack-up position.
What to Do in Case of Emergency
Tire is Punctured or Bursts
8-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 529 of 687

WARNING
Use only the front and rear jacking
positions recommended in this
manual.
Attempting to jack the vehicle in
positions other than those
recommended in this manual is
dangerous. The vehicle could slip
off the jack and seriously injure or
even kill someone. Use only the
front and rear jacking positions
recommended in this manual.
Do not jack up the vehicle in a
position other than the designated
jack-up position or place any
objects on or under the jack.
Jacking up the vehicle in a position
other than the designated jack-up
position or placing objects on or
under the jack is dangerous as it
could deform the vehicle body or
the vehicle could fall off the jack
resulting in an accident.
Use only the jack provided with
your Mazda.
Using a jack that is not designed for
your Mazda is dangerous. The
vehicle could slip off the jack and
seriously injure someone.
Never place objects under the
jack.
Jacking the vehicle with an object
under the jack is dangerous. The
jack could slip and someone could
be seriously injured by the jack or
the falling vehicle.
NOTE
When raising the jack head into the
jacking position and aligning the
groove in the jack head with the rail
under the vehicle body, the top of
the jack head contacts the vehicle's
underbody without the rail
contacting the bottom of the
groove.
6. Insert the jack lever and attach the lug wrench to tire jack.
7. Turn the jack handle clockwise andraise the vehicle high enough so
that the spare tire can be installed.
Before removing the lug nuts, make
sure your Mazda is firmly in
position and that it cannot slip or
move.
WARNING
Do not jack up the vehicle higher
than is necessary.
Jacking up the vehicle higher than is
necessary is dangerous as it could
destabilize the vehicle resulting in
an accident.
What to Do in Case of Emergency
Tire is Punctured or Bursts
8-24
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04