Page 17 of 80
16
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
1Press the Automatic High Beam
switch.
2Turn the headlight switch to the or position.
The Automatic High Beam indicator
will come on when the system is oper-
ating.
AHB (Automatic High Beam)
The Automatic High Beam uses a camera sensor located behind the upper portion of the
windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and
automatically turns the high beams on or off as necessary.
Activating the Automatic High Beam
Page 18 of 80
17
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Switching to the high beams
Push the lever away from you.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Pull the lever to its original position to acti-
vate the Automatic High Beam system
again.
■Switching to the low beams
Press the Automatic High Beam switch.
The Automatic High Beam indicator will
turn off.
Press the switch to activate the Automatic
High Beam system again.
■Temporarily switching to the low beams
Pull the lever toward you and then return it
to its original position.
The high beams are on while the lever is
pulled toward you, however, after the lever
is returned to its orig inal position, the low
beams remain on for a certain amount of
time. Afterwards, the Automatic High
Beam will be activated again.
Turning the high beams on/off manually
Page 19 of 80
18
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Operating the lever operates the wipers or washer as follows. The lever will return
to its original position after operation.
Intermittent windshield wipe rs with interval adjuster
1 (U.S.A.) or (Canada)
Move the lever up by 2 levels
2 Move the lever up by 1 level
3 (U.S.A.) or (Canada)
Move the lever down by 1 level
4 (U.S.A.) or (Canada)
Move the lever down by 2 levels
Depending on the operating state of the wipers when the wiper lever is operated, the wipers
will operate as follows.
• Current wiper operation: Off
Windshield Wipe rs and Washer
Wiper lever operationWiper operation
or Temporary operation
Temporary operation
or Intermittent operation
or High speed operation
Page 20 of 80
19
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
• Current wiper operation: Intermittent operation
• Current wiper operatio n: Low speed operation
• Current wiper operation: High speed operation
Wiper lever operationWiper operation
or Off
Off
or Low speed operation
or High speed operation
Wiper lever operationWiper operation
or Off
Intermittent operation
or High speed operation
or High speed operation
Wiper lever operationWiper operation
or Off
Low speed operation
or No change
or No change
Page 21 of 80
20
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Wiper intervals can be adjusted when inter-
mittent operation is selected.
5Increases the intermittent windshield
wiper frequency
6Decreases the intermittent windshield
wiper frequency
7 Washer/wiper dual operation
Pulling the lever operates the wipers
and washer.
The wipers will automatically operate a
couple of times after the washer
squirts.
Vehicles with headlight cleaners:
When the engine switch is in IGNI-
TION ON mode and the headlights
are on, if the lever is pulled, the head-
light cleaners will operate once. After
this, the headlight cl eaners will operate
every 5th time the lever is pulled.
Rain-sensing windshield wipers
1 (U.S.A.) or (Canada)
Move the lever up by 2 levels
2 Move the lever up by 1 level
3 (U.S.A.) or (Canada)
Move the lever down by 1 level
4 (U.S.A.) or (Canada)
Move the lever down by 2 levels
5 AUTO mode on/off switch
The AUTO mode indicator will turn
on when AUTO mode is selected.
A
Page 22 of 80
21
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Depending on the operating state of the wipers when the wiper lever is operated, the wipers
will operate as follows.
• Current wiper operation: Off
• Current wiper operation: Low speed operation
• Current wiper operation: High speed operation
• Current wiper operation: AUTO mode (Intermittent operation)
Wiper lever operationWiper operation
or Temporary operation
Temporary operation
or Low speed operation
or High speed operation
Wiper lever operationWiper operation
or Off
Off
or High speed operation
or High speed operation
Wiper lever operationWiper operation
or Off
Low speed operation
or No change
or No change
Wiper lever operationWiper operation
or Off
Temporary operation*1
or Low speed operation*2
or High speed operation*2
Page 23 of 80
22
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
• Current wiper operation: AUTO mode (Continuously)
*1: After temporary operation, the mode will return to AUTO mode.
*2: AUTO mode will be canceled.When AUTO mode is selected, the sensor
sensitivity can be adjusted by turning the
switch ring.
6Increases the sensitivity
7Decreases the sensitivity
8 Washer/wiper dual operation
Pulling the lever operates the wipers
and washer.
The wipers will automatically operate a
couple of times after the washer
squirts.
Vehicles with headlight cleaners:
When the engine switch is in IGNI-
TION ON mode and the headlights
are on, if the lever is pulled, the head-
light cleaners will operate once. After
this, the headlight cl eaners will operate
every 5th time the lever is pulled.
Wiper lever operationWiper operation
or Off
No change
or Low speed operation*2
or High speed operation*2
Page 24 of 80
23
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Turns the intuitive parking assist on/off
When on, the indicator light comes on to
inform the driver that the system is opera-
tional.
Intuitive Parking Assist (if equipped)
The distance from your vehicle to nearby obstacles when parallel parking or maneuvering
into a garage is measured by the sensors and communicated via the multi-information dis-
play, Center Display and a buzzer. Always check the surrounding area when using this
system.
Intuitive parking assist switch
