Page 25 of 80
24
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
BSM main switch
This switch is for both the BSM function
and RCTA function.
Pressing the switch turns the system on
or off. When the switch is turned on,
the indicator on the switch illuminates.
Outside rear view mirror indicators
BSM function:
When a vehicle is detected in a blind
spot of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator on the detected side will illu-
minate. If the turn signal lever is oper-
ated toward the detected side, the
outside rear view mirror indicator will
flash.
RCTA function:
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, both outside rear view mirror
indicators will flash.
Center Display
If a vehicle approaching from the right or left at the rear of the vehicle is detected, the
RCTA icon for the detected side will be displayed on the Center Display.
This illustration shows an example of a vehi cle approaching from both sides of the vehi-
cle.
RCTA buzzer (RCTA function only)
If a vehicle approaching from the right or left at the rear of the vehicle is detected, a
buzzer will sound. The buzzer also sounds for approximately 1 second immediately
after the BSM main switch is op erated to turn the system on.
BSM (Blind Spot Monitor)
The Blind Spot Monitor is a system that has 2 functions:
● The BSM (Blind Spot Monitor) function
Assists the driver in making a decision when changing lanes
● The RCTA (Rear Cross Traffic Alert) function
Assists the driver when backing up
These functions use same sensors.
A
B
C
D
Page 26 of 80
25
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
The tire pressure detected by the tire pres-
sure warning system can be displayed on
the multi-information display.
The illustration used is intended as an exam-
ple, and may differ from the image that is
actually displayed on the multi-information
display.
1Park the vehicle in a safe place, turn the engine switch off and wait 20 minutes or more.
Initialization cannot be performe d while the vehicle is moving.
2Adjust the tire inflation pressure to the sp ecified cold tire inflation pressure level.
Make sure to adjust the tire pressure to the specified cold tire inflation pressure level.
The tire pressure warning system will operate based on this pressure level.
3Start the engine.
4Press and hold the tire pressure warn-
ing reset switch until the tire pressure
warning light blinks slowly 3 times.
Then a message will be displayed on
the multi-information display.
5Drive straight (with occasional left and righ t turns) at approximately 25 mph (40 km/h)
or more for approximat ely 10 to 30 minutes.
Initialization is complete when the position of each tire is determined and the inflation
pressure of each tire is displayed on the multi-information display.
Tire Pressure Warning System
Your vehicle is equipped with a tire pressure warning system that uses tire pressure warn-
ing valves and transmitters to detect low tire inflation pressure before serious problems
arise.
The tire inflation pressure display function
Initializing the tire pressure warning system
Page 27 of 80
26
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
1Louder
2Lower
The indicator comes on when the ASC sys-
tem is on.
When the dial is turned to the lowest vol-
ume, the ASC system will be turned off and
the indicator will go off.
ASC (Active Sound Control) (if equipped)
The ASC system is an electronic sound syst em that generates engine sound, conveying
the kinetic situations of the vehicle’s acceler ation and deceleration to the driver through
the speakers inside the instrument panel.
The vehicle’s response to the driver’s acceler ation behavior and shift operations are also
conveyed in sound.
When sport mode is selected, the sound conveyed to the driver will be louder.
Controlling volume
Page 28 of 80
27
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Driving Comfort
Vehicles with a 10.3-inch display
“MAP” button
Press this button to display the vehicle’s
current position.
“MENU” button
Press this button to display the menu
screen.
Back button
Press this button to display the previ-
ous screen.
Touchpad
Slide your finger on the touchpad and move the pointer to select a function, letter and
screen button.
Press the touchpad to enter the selected function, letter or screen button. Certain fin-
ger movements on the touchpad can perform functions, such as changing map scalings
and scrolling list screens.
Sub function button
When is displayed on the screen, a functi on screen assigned to the screen can be
displayed.
Remote Touch
The Remote Touch can be used to operate the Center Display.
Remote Touch is the name for the device that includes the “MAP” button, “HOME” but-
ton, “MENU” button, back button, touchpad and sub function button.
Names and operations of each part
A
B
C
D
E
Page 29 of 80
28
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Vehicles with a 8-inch display
“HOME” button
Press this button to display the “Home”
screen.
“MENU” button
Press this button to display the menu
screen.
Back button
Press this button to display the previ-
ous screen.
Touchpad
Slide your finger on the touchpad and move the pointer to select a function, letter and
screen button.
Press the touchpad to enter the selected function, letter or screen button. Certain fin-
ger movements on the touchpad can perform functions, such as scrolling list screens.
Sub function button
When is displayed on the screen, a functi on screen assigned to the screen can be
displayed.
A
B
C
D
E
Page 30 of 80
29
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Press the “MENU” button on the Remote Touch to display the menu screen.
*1: Refer to the “NAVIGATION AND MU LTIMEDIA SYSTEM OWNER’S MANUAL”.
*2: This function is not available on some models.
Center Display
Menu screen
Vehicles with a 10.3-inch display Vehicles with a 8-inch display
SwitchFunction
Select to display the “Destination” screen. ( P.34)
Select to display the audio control screen. (P.43, 44, 45, 46)
Select to display the hands-free control screen. ( P.37)
Select to display the “Apps” screen.*1, 2
//
When an Apple CarPlay/Android Auto connection is established
and this button displays “Apple CarPlay”/“Android Auto”, select to
display the Apple CarPlay/Android Auto screen.
*1, 2
Select to display th e information screen. (P.32)
Select to display the setup screen.*1
Select to display the air co nditioning control screen. ( P.48)
Select to adjust the contrast and brightness of the screens, turn the
screen off, etc.
*1, 2
Page 31 of 80
30
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Different information can be displayed on the left and right sides of the screen. For example,
air conditioning system screen can be displa yed and operated while the fuel consumption
information screen is being displa yed. The large screen on the left of the display is called the
main display, and the small screen to the right is called the side display.
The following function s can be displayed
and operated on the side display.
Navigation system ( P.34)
Audio ( P.43, 44, 45, 46)
Vehicle information (P.33)
Air conditioning system ( P.50)
Show/hide the side display
*
*
: Refer to the “NAVIGATION AND MU LTIMEDIA SYSTEM OWNER’S MANUAL”.
Split-screen display (Vehicles with a 10.3-inch display)
Side display (Vehicles with a 10.3-inch display)
A
B
C
D
E
Page 32 of 80
31
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Select the desired point on the map screen.
Move the desired point on the center of the
map screen.
Cursor mark
Distance from the current position to
the cursor mark
Select to register as a memory point
Select to set as a destination
Press the “MAP” button on the Remote To uch to return to the current position.
While route guidance is operating, you can change the route using the following method.
1Select on the map screen.
2Select the desired item to be set.
Select to display the overview of the
entire route
Select to reorder destinations
Select to change route type
Select to set route preferences
Select to set detours
Select to start from adjacent road
3Check that the route overview is displayed.
Screen scroll operation (Vehicles with a 10.3-inch display)
A
B
C
D
Editing route (Vehicles with a 10.3-inch display)
A
B
C
D
E
F
Some functions are unavailable while the vehicle is in motion. Refer to the “NAVIGATION
AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.
