7
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Audio remote control switches ............................................................................ P.42
Paddle shift switches
*
Meter control switches ........................................................................................... P.14
Vehicle-to-vehicle distance switch
*
Cruise control switch*
LTA (Lane Tracing Assist) switch*
Talk switch .................................................................................................................. P.40
Telephone switches ................................................................................................. P.40
*: Refer to the “OWNER’S MANUAL”.
A
B
C
D
E
F
G
H
24
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
BSM main switch
This switch is for both the BSM function
and RCTA function.
Pressing the switch turns the system on
or off. When the switch is turned on,
the indicator on the switch illuminates.
Outside rear view mirror indicators
BSM function:
When a vehicle is detected in a blind
spot of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator on the detected side will illu-
minate. If the turn signal lever is oper-
ated toward the detected side, the
outside rear view mirror indicator will
flash.
RCTA function:
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, both outside rear view mirror
indicators will flash.
Center Display
If a vehicle approaching from the right or left at the rear of the vehicle is detected, the
RCTA icon for the detected side will be displayed on the Center Display.
This illustration shows an example of a vehi cle approaching from both sides of the vehi-
cle.
RCTA buzzer (RCTA function only)
If a vehicle approaching from the right or left at the rear of the vehicle is detected, a
buzzer will sound. The buzzer also sounds for approximately 1 second immediately
after the BSM main switch is op erated to turn the system on.
BSM (Blind Spot Monitor)
The Blind Spot Monitor is a system that has 2 functions:
● The BSM (Blind Spot Monitor) function
Assists the driver in making a decision when changing lanes
● The RCTA (Rear Cross Traffic Alert) function
Assists the driver when backing up
These functions use same sensors.
A
B
C
D
