2023 LEXUS RC350 sensor

16
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
1Press the Automatic High Beam
switch.
2Turn the headlight switch to the or position.
The Automatic High Beam indicator
will come on when the system is oper-
ating.
AHB (Automatic High Beam)
The Automatic High Beam uses a camera sensor located behind the upper portion of the
windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and
automatically turns the high beams on or off as necessary.
Activating the Automatic High Beam

22
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
• Current wiper operation: AUTO mode (Continuously)
*1: After temporary operation, the mode will return to AUTO mode.
*2: AUTO mode will be canceled.When AUTO mode is selected, the sensor
sensitivity can be adjusted by turning the
switch ring.
6Increases the sensitivity
7Decreases the sensitivity
8 Washer/wiper dual operation
Pulling the lever operates the wipers
and washer.
The wipers will automatically operate a
couple of times after the washer
squirts.
Vehicles with headlight cleaners:
When the engine switch is in IGNI-
TION ON mode and the headlights
are on, if the lever is pulled, the head-
light cleaners will operate once. After
this, the headlight cl eaners will operate
every 5th time the lever is pulled.
Wiper lever operationWiper operation
or Off
No change
or Low speed operation*2
or High speed operation*2

23
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Turns the intuitive parking assist on/off
When on, the indicator light comes on to
inform the driver that the system is opera-
tional.
Intuitive Parking Assist (if equipped)
The distance from your vehicle to nearby obstacles when parallel parking or maneuvering
into a garage is measured by the sensors and communicated via the multi-information dis-
play, Center Display and a buzzer. Always check the surrounding area when using this
system.
Intuitive parking assist switch

24
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
BSM main switch
This switch is for both the BSM function
and RCTA function.
Pressing the switch turns the system on
or off. When the switch is turned on,
the indicator on the switch illuminates.
Outside rear view mirror indicators
BSM function:
When a vehicle is detected in a blind
spot of the outside rear view mirrors or
approaching rapidly from behind into a
blind spot, the outside rear view mirror
indicator on the detected side will illu-
minate. If the turn signal lever is oper-
ated toward the detected side, the
outside rear view mirror indicator will
flash.
RCTA function:
When a vehicle approaching from the
right or left at the rear of the vehicle is
detected, both outside rear view mirror
indicators will flash.
Center Display
If a vehicle approaching from the right or left at the rear of the vehicle is detected, the
RCTA icon for the detected side will be displayed on the Center Display.
This illustration shows an example of a vehi cle approaching from both sides of the vehi-
cle.
RCTA buzzer (RCTA function only)
If a vehicle approaching from the right or left at the rear of the vehicle is detected, a
buzzer will sound. The buzzer also sounds for approximately 1 second immediately
after the BSM main switch is op erated to turn the system on.
BSM (Blind Spot Monitor)
The Blind Spot Monitor is a system that has 2 functions:
● The BSM (Blind Spot Monitor) function
Assists the driver in making a decision when changing lanes
● The RCTA (Rear Cross Traffic Alert) function
Assists the driver when backing up
These functions use same sensors.
A
B
C
D

48
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Adjusting the temperature setting
To adjust the temperature setting, touch and
slide your finger up or down on the sensor.
The temperature setting can also be
adjusted by touching on the sensor.
When the temperature setting is changed, a
buzzer sounds.
If is not pressed, the system will
blow ambient temperature air or heated air.
■Fan speed setting
Press to increase the fan speed.
Press to decrease the fan speed.
■Change the airflow mode
To change the airflow, press .
The air outlets used are switched each time the button is pressed.Display the air conditioning control
screen
Display the option control screen
Adjust the left-hand side temperature
setting
Adjust the fan speed setting
Select the air flow mode
Adjust the right-hand side temperature setting
Function on/off indicators
Display the sub function menu
Air conditioning control screen
A
B
C
D
E
F
G
H