Page 335 of 618

333
5
CV Owner's Manual_Europe_M52N20_en
5-4. Other interior features
Interior features
5-4.Other interior features
The power outlet can be used for  
12 V accessories that run on less  
than 10 A. 
Open the lid.
Front
Luggage compartment (if  
equipped)
■The power outlet can be used when 
The engine switch is in ACC or ON.
■When turning the engine switch off 
Disconnect electrical devices with  charging functions, such as mobile bat-tery packs. 
If such devices are left connected, the  engine switch may not be turned off nor-mally.
A portable device, such as a smart- 
phone or mobile battery, can be  
charged by just placing it on the  
charging area, provided the device  
is compatible with the Qi wireless  
charging standard created by the  
Wireless Power Consortium. The  
wireless charger cannot be used  
with a portable device that is larger  
than the charging area. Addition- 
ally, depending on the portable  
device, the wireless charger may  
not operate properly. Refer to the  
operation manual of the portable  
device.
■The “Qi” symbol 
The “Qi” symbol is a trademark of  
the Wireless Power Consortium.
Other interior features
Power outlet
NOTICE
■To prevent the fuse from being  blown 
Do not use an accessory that uses  more than 12 V 10 A.
■To avoid damaging the power outlet 
Close the power outlet lid when the  
power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short  
circuit.
■To prevent the battery from being 
discharged 
Do not use the power outlet longer  than necessary when the engine is  
not running.
Wireless charger (if  
equipped) 
     
        
        Page 337 of 618

335
5
CV Owner's Manual_Europe_M52N20_en
5-4. Other interior features
Interior features
■Operation indicator light status
*: Depending on the portable device, the operation indicator light may stay illumi- 
nated (orange) after charging has completed.
 If the operation indicator light blinks 
If an error is detected, the operation indicator light will bli nk (orange). Take  
the appropriate measures according to the table below.
■The wireless charger can be oper- ated when 
The engine switch is in ACC or ON.
■Portable devices that can be  charged
●Portable devices compatible with the Qi wireless charging standard can be charged by the wireless charger. How- 
ever, compatibility with all devices  
which meet the Qi wireless charging  standard is not guaranteed.
●The wireless charger is designed to supply low power electricity (5 W or  
less) to a cellular phone, smartphone,  or other portable device.
■If a cover or accessory is attached to the portable device 
Do not charge a portable device if a  cover or accessory which is not Qi com-
Operation indicator lightState
OffThe Wireless charger is off
Green (illuminated)Standby (charging is possible)
Charging is complete*
Orange (illuminated)
A portable device has been placed on the  
charging area (identifying the portable device)
Charging in progress
Operation indicator lightSuspected causeMeasure
Blinks (orange) at a one 
second interval continu-
ously
Vehicle to charger commu-
nication failure.
Contact any authorized 
Toyota retailer or Toyota 
authorized repairer, or 
any reliable repairer.
Blinks (orange) 3 times 
repeatedly
A foreign object exists 
between the portable 
device and charging area.
Remove the foreign 
object.
Portable device is not posi-
tioned properly on the 
charging area.
Move the portable device 
toward the center of the 
charging area.
Blinks (orange) 4 times 
repeatedly
The temperature of the 
wireless charger is exces-
sively high.
Stop charging immedi-
ately and continue 
charging after a while. 
     
        
        Page 368 of 618

366
CV Owner's Manual_Europe_M52N20_en
6-3. Do-it-yourself maintenance
■Routine tire inflation pressure  checks 
The tire pressure warning system does  not replace routine tire inflation pressure checks. Make sure to check tire inflation  
pressure as part of your routine of daily  vehicle checks.
■Tire inflation pressure
●It may take a few minutes to display the tire inflation pressure after the engine switch is turned to ON. It may  
also take a few minutes to display the  tire inflation pressure after inflation pressure has been adjusted.
●Tire inflation pressure changes with temperature. The displayed values  
may also be different from the values  measured using a tire pressure gauge.
■Situations in which the tire pres- 
sure warning system may not oper- ate properly
●In the following cases, the tire pres-sure warning system may not operate properly. 
• If non-genuine Toyota wheels are  used.• A tire has been replaced with a tire  
that is not an OE (Original Equipment)  tire.• A tire has been replaced with a tire  
that is not of the specified size. • Tire chains, etc. are equipped. 
• An auxiliary-supported run-flat tire is  equipped.• If a window tint that affects the radio  
wave signals is installed. • If there is a lot of snow or ice on the vehicle, particularly around the wheels  
or wheel housings. • If the tire inflation pressure is extremely higher than the specified  
level. • If tires not equipped with tire pressure warning valves and transmitters are  
used. • If the ID code on the tire pressure warning valves and transmitters is not  
registered in the tire pressure warning  
computer.
●Performance may be affected in the  following situations. 
• Near a TV tower, electric power plant,  gas station, radio station, large dis-play, airport or other facility that gen- 
erates strong radio waves or electrical  noise.• When carrying a portable radio, cellu- 
lar phone, cordless phone or other  wireless communication device.
●When the vehicle is parked, the time taken for the warning to start or go off could be extended.
●When tire inflation pressure declines rapidly for example when a tire has  
burst, the not to able detect.
■Warning performance of the tire  pressure warning system 
The warning of the tire pressure warning  
system will change in accordance with  driving conditions. For this reason, the system may give a warning even if the  
tire pressure does not reach a low  enough level, or if the pressure is higher than the pressure that was adjusted to  
when the system was initialized.
When replacing tires or wheels, tire  
pressure warning valves and trans- 
mitters must also be installed. 
When new tire pressure warning  
valves and transmitters are  
installed, new ID codes must be  
registered in the tire pressure warn- 
ing computer and the tire pressure  
warning system must be initialized.  
Have tire pressure warning valves  
and transmitter ID codes regis- 
tered any authorized Toyota retailer  
or Toyota authorized repairer, or 
Installing tire pressure warn- 
ing valves and transmitters