2022 MERCEDES-BENZ GLC COUPE service

The tyre pressure loss
warning system is only an
aid. It is the driver's responsibility toset the tyre
pressure tothere commended cold tyre pressure
suitable forth e operating situation and tocheck
it.
Be sure toalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 365)
R Displ aymessages about the tyres
(/ page 460)
R
R est est ar
arting t
ting t he tyr
he tyr e pr
e pressur
essur e loss w
e loss w ar
arning syst
ning syst em
em
R
R eq
eq uir
uir ements:
ements:
R The recommended tyre pressure is cor rectly
set forth ere specti veoperating condition on
each of thefo ur wheels (/ page 365).
Re start the tyre pressure loss warning system in
th efo llowing situations:
R The tyre pressure has changed.
R The wheels or tyres ha vebeen changed or
ne wly /tted. On-board computer:
4 Service 5
Tyres #
Swipe down wards on Touch Control on the
leT-hand side of the steering wheel.
The Run Flat Indicator active Restart: press
Touch Control message is shown in the multifunc-
tion display #
Toinitiate a restart, press Touch Control on
th e leT-hand side of the steering wheel.
The Tyre pressure now OK? message is
shown in the multifunction displa y. #
Select Yes. #
Tocon/rm restart, press Touch Control on the
leT-hand side of the steering wheel.
The Run Flat Indicator restarted message is
shown in the multifunction displa y.
Be su retoalso obser vethefo llowing fur ther rela-
te d subjects:
R Notes on tyre pressure (/ page 365) Wheel c
Wheel c
hange
hange N
No
ot
tes on selecting,
es on selecting, /tting
/ttingand r
and replacing tyr
eplacing tyr es
es *
N
NOOTE
TE Mercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. &
W
WARNING
ARNING Risk of accident due toincor-
re ct wheel and tyre dimensions
If wheels and tyres of the wrong size are /t ted,
th e service brakes or components in the brake
system and in the wheel suspension may be
damaged. #
Alwaysre place wheels and tyres with
th ose that ful/l the speci/cations of the
original part.
Fo r wheels, pay attention tothefo llowing:
R Designation
R Type Wheels and tyres
369
369

N
N
o
ot
tes on t
es on t ec
echnical data
hnical data
* NO
NOTE
TEMercedes-AMG vehicles #
Obser vethe no tes in the Supplement.
Yo u could otherwise failto recognise
dangers. The
tech nical data was de term ined in accordance
with EU Directives. The data stated only applies to
ve hicles with standard equipment. You can obtain
fur ther information from a Mercedes-Benz Service
Centre.
Onl Onl y f
y for cert
or cert ain countr
ain countr ies:
ies:you can /n dvehicle-
speci/c vehicle data in theCO C documents (CER-
TIFIC ATE OF CONFORMITY). These documents
are supplied when theve hicle is deli vered. On-boar
On-boar
d electr
d electronics
onics N
No
ot
tes on t
es on t am
amper
per ing wit
ing wit h t
h the engine electr
he engine electr onics
onics *
N
NOOTE
TE Premature wearthro ugh improper
maintenance Improper maintenance may cause
vehicle
components towe ar more quickly and the
ve hicle's operating permit may be in validated. #
Always ha veworkon the engine elec-
tronics and related components car ried
out at a quali/ed specialist workshop. T
T
w
w o-wa
o-wa y r
y radios
adios N
No
ot
tes on
es on /tting
/tting tw
two-wa
o-wa y r
y radios
adios &
W
WARNING
ARNING Risk of accident due to
improper workon two-w ayradios
If two-w ayradios are manipulated or retro/t-
ted incor rectl y,the electromagnetic radiation
from the two-w ayradios can inter fere with the
ve hicle elect ronics and jeopardise the operat-
ing saf ety of theve hicle. #
You should ha veall workon electrical
and electronic components car ried out
at a quali/ed specialist workshop. &
W
WARNING
ARNING Risk of accident due to
improper operation of two-w ayradios
If yo u use two-w ayradios in theve hicle
improper ly,th eir electromagnetic radiation
can disrupt theve hicle's elect ronics. This is
th e case in thefo llowing situations, in particu-
lar:
R The two-w ayradio is not connected toan
ex terior aerial.
R The exterior aerial is /tted incor rectly or is
not a lo w-re0ection aerial.
This could jeopardise the operating saf ety of
th eve hicle. #
Have the lo w-re0ection exterior aerial /t-
ted at a quali/ed specialist workshop. #
When operating two-w ayradios in the
ve hicle, alw ays connect them tothe lo w-
re 0ection exterior aerial. 382
382
Te
ch nical data

If
yo u ha veacciden tally refuelled wi th the
wrong fuel: #
Do not switch on theve hicle. #
Consult a quali/ed specialist workshop. The
following compatibility indications for fuel
apply toyour vehicle: 1
For petrol with maximum of 5% ethanol byvol-
ume
2 For petrol with maximum of 10% ethanol by
vo lume Ac
cording toEuropean standard EN 16942, you
can /nd the compatibility indications at thefo l-
lowing locations:
R Ontheve hicle on the information label on the
fuel /ller 0ap (/ page 189)
R Onthe fuel dispenser or pump nozzle suitable
fo ryo ur vehicle thro ughout Europe
If th eav ailable fuel is not su1ciently low in sul-
phur, it may produce unpleasant odours.
The recommended octane number foryo ur vehi-
cle can also be found on the information label on
th e fuel /ller 0ap (/ page 189).
As a temp orary measure, if there commended fuel
is not available, you may also use regular unlea-
ded petrol with an octane number of at least
91 RON.
This may reduce engine output and increase fuel
consum ption.
Ne verre fuel using petrol of a lo werRO N.
Fu rther information on fuel can be obtained at a
/lling station or a quali/ed specialist workshop. Inf
Inf or ormation on additiv
mation on additiv es in pe
es in pe tr
trol (v
ol (v ehicles with
ehicles with
pe
pe tr
trol engine)
ol engine)
Obser vethe no tes on operating 0uids
(/ page 387).
* NO
NOTE
TEDamage from use of unsuitable
additives Even small amounts of
the wrong additive may
lead tomalfunctions occur ring. #
Only add cleaning additives recommen-
ded byMercedes-Benz tothe fuel. Mercedes-Benz
recommends that you use brand-
name fuels with additives.
In some countries, the fuel available may not ha ve
su1cient additives. Deposits could build up in the
fuel injection system as a result. In this case, in
consultation with a Mercedes-Benz service
centre, mix the fuel with the cleaning additive rec-
ommended byMercedes-Benz. Obser vethe no tes
and mixing ratios indica ted on theta nk. Te
ch nical data
389 389

#
Avoid impurities in AdBlue ®
. Ad
Blue ®
residues cr ystallise aTer a period of
time, and contaminate the sur faces with which
th ey come into contact. Clean the dirty sur faces
with water as soon as possible.
When you open theAd Blue ®
tank, small amounts
of ammonia vapour may escape. Do not inhale
any ammonia vapours that may be released. Only
/ll theAd Blue ®
tank in well-ventilated areas.
A
A dBlue
dBlue ®
®
/lling
/lling capacity and consump
capacity and consump tion
tion
Tot
Tot al capacity of A
al capacity of A dBlue
dBlue®
®
t
tank
ank Model
Tot
Mode lT otal capacity
al capacity
All model s2 7.5 litresA
A
dBlue
dBlue ®
®
consump
consump tion
tion
The average AdBlue ®
consu mption is between 1%
and 5% of fuel consum ption. Like fuel consump-
tion, AdBlue ®
consu mption is high lydependent
upon driving style and operating conditions. For
th is reason, your vehicle's actual consu mption /g-
ures in da y-to -day operating conditions may di.er from
the consum ption /gures calculate d. The fre-
qu ency at which you will ha veto to p up AdBlue ®
will also vary. Ha vetheAd Blue ®
supply checked
at a quali/ed specialist workshop before making
jou rney s outside Europe. Before a lon ger st ayout-
side Europe, consult a quali/ed specialist work-
shop.
A
A dBlue dBlue ®
®
r
rang
ang e and
e and /ll
/lllev
level
el
The AdBlue ®
/ll le vel and range can be displa yed
via the on-board computer. The AdBlue ®
range
sh ow n is high lydependent upon driving style and
operating conditions. The actual range therefore
may deviate from thera nge cur rently displa yed on
th e on-board computer. The information supplied
in the Owner's Manual rega rding there ser ve
qu antity at the /rst display warning and the mini-
mum top-up quantity with an em pty fuel tank is
also tobe understood as guide values. Engine oil
Engine oil
N
No
ot
tes on engine oil
es on engine oil
Obser vethe no tes on operating 0uids
(/ page 387). *
N
NOOTE
TE Engine damage caused byan inco r-
re ct oil /lter, incor rect oil or additi ves #
Do not use engine oils or oil /lters other
th an those which meet the speci/cations
necessary forth e prescribed service
inter vals. #
Do not alter the engine oil or oil /lter in
order toachie velonger change inter vals
th an prescribed. #
Do not use additives. #
Have the engine oil changed aTer the
prescribed inter vals. 392
392
Te
ch nical data

Displa
Displa
y messag
y messag es
es Intr
Intr
oduction
oduction Inf
Inf
or
ormation about displa
mation about displa y messag
y messages
es
Display messages appear on the inst rument dis-
pla y.
Display messages with graphic symbols are sim-
pli/ed in the Owner's Manual and may di.er from
th e symbols on the inst rument displa y.The instru-
ment display sh ows high-priority display messages
in red. Cer tain display message s are accompa-
nied byawa rning tone.
Please act in accordance with the display mes-
sages and follow the additional no tes in the Own-
er's Manual.
Fo r some display messages, symbols will also be
shown:
R Õ Further information
R ¨ Hide displ aymessage
Wi th th e leT-hand Touch Control, you can select
th ere specti vesymbol byswiping tothe leT or
ri ght. Pressing Õdispla ysfur ther information on th
e media displa y.Press the¨ symbol tohide
th e display message.
Yo u can hide lo w-priority display messages by
pressing the back button Porthe leT-hand
To uch Control. The display message s willthen be
stored in the message memor y.
Re ctify the cause of a display message as quickly
as possible.
High-priority display message s cannotbe hidden.
The instrument display will show these display
messages permanently until the cause of the dis-
play message has been recti/ed.
Calling up sav
Calling up sav ed displa ed display messag
y messag es
es
On-board computer:
4 Service 5
1 message
If th ere are no display messages, No messages
will appear on the inst rument displa y. #
Scroll thro ugh the display messages byswip-
ing upwards or down wards on the leT-hand
To uch Control. #
T
T o e
o e xit t
xit t he messag
he messag e memory
e memory:
:press the back
button P. 402
402
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Request service personnel from the operator of thech arging station via the emer gency call button or the emer-
ge ncy numbers attached tothech arging station.
Vehicle not currently being
charged Charging station
fault *A
malfunction has occur red in thech arging station or the RFID card is not recognised. #
Start thech arging process at a di.erent charging station.
or #
Have the RFID card checkedto ensure it is functioning.
Charging method currently
unavailable Please try
again or change charging
method *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Charging fault Please
change charging method
See Owner's Manual *A
temp orary malfunction has occur red in thech arging station. #
Wait until the malfunction has passed.
or #
Start thech arging process at a di.erent charging station.
Only electric drive availa-
ble Power limited *T
he fuel tank is em pty and the combustion engine is switched o.. The output of your vehicle is limi ted because you
are driving in elect ric mode. 418 418
Display messages and
warning/indicator lamps

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions #
Refuel immedia tely.
Subse quentl y,there may be temp orary restrictions in theav ailability of elect ric mode over a driving distance of
50 km.
If th ere is fuel in theve hicle, there is a fault with the combustion engine. #
Consult a quali/ed specialist workshop.
"Electric" drive program
currently unavailable *T
hecharge leve l of the high-voltage battery is not su1cient forth e Electric drive prog ram.
Char gethe high-voltage battery (/ page 196).
Reduced drive system per-
formance See Owner's
Manual *T
he drive system switches toemer gency ope ration mode due toa malfunction. #
Drive on carefull y. #
Consult a quali/ed specialist workshop.
Û
Battery overheated Stop,
everybody out! Outdoors if
possible *T
he high- voltage battery has overheated. There is a risk of /re. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
If possible, stop theve hicle in the open air and ensure that all vehicle occupants getout.
% Supporting vehicle functions may activate automaticall y,e.g. the air-recirculation mode as part of climate control. #
Do not continue driving. #
If smoke is present, lea vethe danger zone and call the /re service immediatel y. #
Consult a quali/ed specialist workshop even if there are no extern al signs of a /re. Displ
aymessages and warning/indicator lamps
419 419

Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences andM
MSolutions
Solutions
ÿ
Coolant Stop vehicle
Switch engine off *T
he coolant is too hot. #
Stop immediately in accordance with the tra1c conditions and switch o. theve hicle. &
W WARNING
ARNING Risk of burns when opening the bonnet
If yo u open the bonnet in theev ent of an overheated engine or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Before opening the bonnet, allow the engine tocool down. #
Intheev ent of a /re in the engine compartment, keep the bonnet closed and call the /re service. #
Wait until the engine has cooled down. #
Make sure that the air supply tothera diator is not obstructed. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C.
ÿ *T
here is a malfunction in the engine cooling system. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C. 430
430
Display messages and
warning/indicator lamps