#
Push remo teoperating switch 1until the
boot lid is fully closed. #
Press closing button 1onthe boot lid.
V
V ehicles wit
ehicles wit h KEYLESS-GO
h KEYLESS-GO #
Press locking button 2onthe boot lid.
If a key is de tected outside theve hicle, the
boot lid will close and theve hicle will be
loc ked. #
With th e boot lid comple tely open, press and
hold theH button on thekey. Thekey must
be in the vicinity of theve hicle.
V
V ehicles wit
ehicles wit h HANDS-FREE A
h HANDS-FREE A CCESS
CCESS #
With th e boot lid comple tely open, make a
kicking mo vement with your foot below the
bumper (/ page 98).
Boo
Boo t lid aut
t lid aut omaticrev
omatic rever
ersing function
sing function
The boot lid is equipped with automatic bloc kage
de tection with a reve rsing function. If an obstacle
obstructs the boot lid during the automatic clos-
ing process, it will automatically open again. The
automatic reve rsing function is only an aid and is
not a substitute foryo ur attentiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W WARNING
ARNING Risk of becoming trapped
despite reve rsing function
The reve rsing function will not react:
R tosoT, light and thin objects, e.g. /n gers
R towa rdsth e end of the closing procedure Opening and closing
97
97
1
Toclose
2 Toopen
The buttons on the driver's door take precedence. #
T
To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:presstheW
button be yond the point of resis tance or pull
and release it. #
T
To int
o int err
errup
upt aut
t aut omatic oper
omatic oper ation:
ation:press or pull
th eW button again. When
theve hicle is switched o., you can con-
tinue tooperate the side windo ws.
A
A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he side windows
he side wind ows
If an obs tacle impedes a side window during the
closing process, the side window will open again
automaticall y.The automatic reve rsing function is
only an aid and is not a substitute foryo ur atten-
tiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite there being reve rsing pr otection
on the side window
The reve rsing function does not react:
R tosoT, light and thin objects, e.g. /n gers.
R during resetting.
The reve rsing function cannot pr event some-
one from becoming trapped in these situa-
tions. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone becomes trapped, press the
W button toopen the side window
again. A
A
ut
ut omatic function of t
omatic function of t he side windows
he side wind ows In
thefo llowing cases, the side windo wswill be
closed automatically when theve hicle is switched
o.:
R if it starts torain
Ra in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply
The side windo wswill be closed as far as theve n-
tilation position. Opening and closing
101
101
The sliding sunroof and
thero ller sunblind are
operated using control panel 1.
The panorama sliding sunroof can be operated
only when thero ller sunblind is open. #
T To open: o open: swipe backwards across control
panel 1and hold. #
T To close: o close: swipeforw ards across cont rol panel
1 and hold. #
T
To r
o r aise or low
aise or low er
er:
:press control panel 1
brie0y. #
T
To st
o st ar
art aut
t aut omatic oper
omatic oper ation:
ation:swipe forw ards
or backwards across cont rol panel 1. #
T
To cancel aut
o cancel aut omatic oper
omatic operation:
ation:press control
panel 1again.
The opening/closing process will be stopped.
A
A ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he sliding sun-
he sliding sun-
r
r oof
oof
If an obstacle obstructs the sliding sunroof during
th e closing process, the sliding sunroof will open
again automaticall y.The automatic reve rsing func-
tion is only an aid and is not a substitute foryo ur
attentiveness. #
During the closing process, make sure that no
body parts are in the closing area. &
W
WARNING
ARNING Risk of becoming trapped
despite reve rsing function
The reve rsing function will not react:
R tosoT, light and thin objects, e.g. /n gers.
R towa rdsth e end of the closing procedure. R
during resetting. #
During the closing process, make sure
th at no body parts are in the closing
area. #
If someone is trapped, release the con-
trol panel immediatel y.
or #
Touch the control panel during automatic
closing.
The closing process will be stopped. A A
ut
ut omatic rev
omatic rever
ersing function of t
sing function of t he r
he roller sunblind
oller sunblind
If an obstacle obstructs thero ller sunblind during
th e closing process, thero ller sunblind will open
again automaticall y.The automatic reve rsing func-
tion is only an aid and is not a substitute foryo ur
attentiveness. #
When closing thero ller sunblind, make sure
th at no body parts are in thera nge of mo ve-
ment. Opening and closing
105
105
&
W
WARNI NG
ARNI NGRisk of becoming trapped
despite reve rsing function
In particular, there ve rsing function does not
re act tosoT, light and thin objects, e.g. /n-
ge rs. #
When closing thero ller sunblind, make
sure that no body parts are in thera nge
of mo vement. #
If someone is trapped, release the con-
trol panel immediatel y.
or #
Touch the control panel during automatic
closing.
The closing process will be stopped. A A
ut
ut omatic functions of t
omatic functions of t he sliding sunr
he sliding sunroof
oof%
The term "sliding sunroof" refers to the pano-
ra ma sliding sunroof.
The sliding sunroof will be closed automatically
when theve hicle has been switched o. in thefo l-
lowing situations:
R if it starts torain Ra
in is de tected byara in sensor on the wind-
screen.
R inextreme temp eratures
R aTer a cer tain time (depending on the on-
board electrical system voltage)
R ifth ere is a malfunction in the po wer supply
The sliding sunroof will rise at there ar in order to
continue ventilating theve hicle interior.
If th e sliding sunroof is obstructed during an auto-
matic closing procedure, thero of will be opened
again slightl y.The automatic function forth e slid-
ing sunroof and the side windo wswill then be
deactivated.
R
R ain closing function when dr ain closing function when dr iving
iving
V
V ehicles wit
ehicles wit h a panor
h a panorama sliding sunr
ama sliding sunr oof:
oof:if it
starts torain, thera ised sliding sunroof will auto-
matically be lo wered while theve hicle is in
motion.
A A ut
ut omatic low
omatic low er
ering function
ing function
V
V ehicles wit
ehicles wit h a panor
h a panorama sliding sunr
ama sliding sunr oof:
oof:ifthe
sliding sunroof is raised at there ar, it will auto-
matically be lo wered slightly at higher speeds. At
low speeds, it will be raised again automaticall y. &
W
WARNI NG
ARNI NGRisk of becoming trapped by
automatic lo wering of the sliding sunroof
At higher speeds, thera ised sliding sunroof
will automatically be lo wered slightly at the
re ar. #
Make sure that nobody reaches into the
sliding sunroof's range of mo vement
while theve hicle is in motion. #
If someone becomes trapped, touch the
cont rol panel. R
R
ectifying pr
ectifying pr oblems wit
oblems with t
h the sliding sunr
he sliding sunr oof
oof &
W
WARNING
ARNING Risk of becoming trapped or
fata l injuries when the sliding sunroof is
closed again
If yo u close the sliding sunroof again immedi-
ately aTer it has been bloc ked or reset, the
sliding sunroof will close with increased or
maximum forc e.
There is a risk of becoming trapped or even of
fata l injuries! 106 106
Opening and closing
#
Release there ar seat backrest and fold it for-
wa rds slightly (/ page 127). #
Press release knob 2and pull the head
re straint up wards as far as it will go.
Re lease knob 1will extend. #
Push bo threlease knobs 1and 2atthe
same time in the direction of the ar row and
pull out the head restraint. #
Foldthere ar seat backrest back until it
engages.
Inst
Inst allation
allation #
Release there ar seat backrest and fold it for-
wa rds slightly (/ page 127). #
Insert the head restraint su chthat the notches
on the bar are on the leT when vie wed in the
direction of tr avel. #
Push the head restraint down until it engages. #
Foldthere ar seat backrest back until it
engages. Con/gur
Con/gur
ing
ingt
the seat se
he seat se ttings
ttings Multimedia system:
4 © 5
Comfort 5
Seat
A
A djus
djusting t ting t he air cushions
he air cushions #
Onthe cor responding menu, adjust the air
cushions forLumbar, Shoulders orSide bol-
sters.
Se
Se tting t
tting t he seat heating balance
he seat heating balance #
Select Heating settings. #
Select Seat heating balance . #
Adjust the heat distribution forth e desired
seat.
% The seat heating balance can be set in the
Seat climate control menu inthere ar.
Coupling nec
Coupling nec k heat t
k heat to seat heating
o seat heating #
Select Additional neck warmer . #
Switch the function forth e desired seat on or
o..
If th e function is active, the neck heat of the
additional cushion has been coupled tothe
seat heating. Se Se
tting aut
tting aut omatic seat adjus
omatic seat adjustment tment &
W
WARNING
ARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat aTer
calling up a driver pro/le
Selecting a user pro/le may trigger an adjust-
ment of the driver's seat tothe position sa ved
under the user pro/le. You or other vehicle
occupants could be injured in the process. #
Make sure that when the position of the
driver's seat is being adjus ted via the
multimedia system, no people or body
parts are in the seat's range of mo ve-
ment.
If th ere is a risk of someone becoming trap-
ped, stop the adjustment process immedi-
atel y: #
a)Tapth ewa rning message onthe cen-
tral displa y.
or 116 116
Seats and st
owing
#
b) Press a memory function position but-
to n or a seat adjustment switch on the
driver's door.
The adjustment process will be stopped. Multimedia system:
4 © 5
Comfort 5
Seat
5 Position seat automatically
Manuall Manuall y adjus
y adjusting dr
ting driv
iver's seat and st
er's seat and st eer
eering
ing
wheel position t
wheel position t o body size
o body size
The vehicle calculates a suitable driver's seat and
steering wheel position on the basis of the driver's
body size and sets this directl y. #
T
To se
o se t t
t the unit of measur
he unit of measur ement
ement::select cmor
ft/in. #
Set the size using the scale. #
Select Start positioning .
The driver's seat and steering wheel position
is adjusted tothe body size that has been set.
% You can also con/gure these settings via the
Mercedes me user account foryo ur user pro-
/le. By synchronising the pro/les in theve hi-
cle and the Mercedes me connect pro/les, yo
u can car ryove rth ese settings foryo ur
ve hicle. Further information about synchronis-
ing user pro/les .
A
A ut ut omaticall
omaticall y adjus
y adjusting drting driv
iver's seat and st
er's seat and st eer
eering
ing
wheel position t
wheel position t o body size
o body size
If th eve hicle has the Interior Assistant, the driv-
er's body size can be de term ined automatically
using the 3D laser cameras in theove rhead con-
trol panel. #
Wait until the Interior Assistant has de ter-
mined the body size. #
Select Start positioning .
The driver's seat and steering wheel position
is adjusted tothe body size that has been
de term ined.
% Further information on the Interior Assistant:
% Ifth e driver's seat and steering wheel position
calculated bytheve hicle is not practical or
comfor table, it can be manually adap ted at
any time via the control buttons.
The outside mir rors are not set via this func-
tion. Instead, they have tobe set manually via
th e operating switches. Ov Ov
er
er vie
vie w of r
w of r elax
elaxation pr
ation pr ogr
ogrammes
ammes R
Hot Relaxing back Based on hot stone mas-
sage, the prog ramme combines heat and mas-
sage. It starts bymassaging the bac k.In addi-
tion, warm pressure points become noticea-
ble, starting in the pelvic area.
R Hot Relaxing shoulders Combination of heat
and massage . It startsbymassaging the
shoulde rs. In addition, warm pressure points
become noticeable, starting in the pelvic area.
R Activating Massage Activating massage pro-
gr amme with upward-moving relaxing waves.
R Classic Massage Calming back massage pro-
gr amme.
R Wave Massage Regenerating massage pro-
gr amme via relaxing waves across the back
and in the seat cushion.
R Mobilizing Massage Mobilising massagepro-
gr amme with upward-moving relaxing waves.
Can promo teslo wer,deeper respiration. This
can impr ovethe supply of oxyge nto cells and
th e brain. Seats and st
owing
117
117
wa
yfo rw ards in the direction of the ar row
using handle 1. #
T
To close:
o close: brie0y push handle 1ofthe open
co ver of the st owage compartment in the front
centre console forw ards.
The co ver will automatically close the st owage
compartment in the front centre console.
Opening and closing t
Opening and closing t he glov
he glove com
e com par
partment
tment #
T
To open:
o open: press button 1.
The glo vecompartment is open. #
T
To close:
o close: fold the glo vecompartment
upwards.
The glo vecompartment is closed. Thr Thr
ough-loading f
ough-loading f eatur
eature in t
e in the r
he rear benc
ear benc h seat
h seat
(EASY
(EASY -PAC
-P AC K Quic
K Quic kf
kfold)
old) F F
olding t olding t he r
he rear seat bac
ear seat bac kr
kr es
ests f ts f orw
orw ard
ard &
W
WARNI NG
ARNI NGRisk of becoming trapped when
adjusting the seats
When you adjust a seat, you may trap yourself
or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. &
W
WARNING
ARNING Risk of an accident because
th e seat backrest is not engaged
The seat backrest may fold forw ards. There is a
risk of thefo llowing, in particular:
R The vehicle occupant may be pressed
against the seat belt. The seat belt cannot
pr otect as intended and could cause addi-
tional injur y.
R Ach ild restraint system is no longer prop-
er ly suppor ted or proper lypositioned and
may no longer ful/l its function as inten-
ded.
R The seat backrest cannot restrain objects
or goods in the boot or load compartment.
Alw ays ensu rethat the seat backrest is
engaged, especiall y:
R ATer the seat has been adjusted.
R ATer the load compartment enlar gement
has been folded forw ards Make sure
that there d marking of the lock veri/-
cation indicator is no lon ger visible. Otherwise,
th e seat backrest will not be loc ked.
Alw ays ensu rethat all vehicle occupants ha ve
th eir seat belts fastened co rrectly and are sitting Seats and st
owing
127 127
proper
ly.Pa rticular attention must be paid tochil-
dren.
R R eq
eq uir
uir ements:
ements:
R The rear seat backrest head restraints are ful ly
inser ted.
R Vehicles with a folding rear armrest: there ar
armrest has been folded up.
F
F olding t
olding t he r
he rear out
ear out er seat bac
er seat bac kr
kr es
ests f ts f orw
orw ard
ard
Yo u can fold the centre and right seat backrests
fo rw ards separatel y.
The leT seat backrest can be folded forw ards only
to get her with the centre seat backrest.
If yo u no longer requ ire thefo lded-down rear seat
backrest as a load area, fold the backrest back
into place. #
Ensure that the centre seat backrest is in an
upright position and loc kedto the leT seat
backrest (/ page 130). #
Press the seat belt tongue of seat belt 1into
ma rked position 2. #
Movethe driver's or front passenger seat for-
wa rds, if necessar y. #
Pull release le ver1. #
Foldthe cor responding seat backrest for-
wa rds.
F
F olding t
olding t he centr
he centr e r
e rear seat bac
ear seat bac kr
kres
es t f
t forw
orw ar
ards
ds
separ
separ at
ately
ely
If yo u no longer requ ire thefo lded-down seat
backrest as a loading area, fold the backrest back
into place. 128
128
Seats and st
owing