2022 MERCEDES-BENZ EQE SALOON oil

stopped and a
warning is displa yed in the multi-
media system. #
Manually open a door stopped in an intermedi-
ate position.
Even if the con venience doo rsare equipped with
senso rs, it cann otbe guaranteed that all objects
are de tected. Object de tection is only an aid and
is not a substitute forth e attention of theve hicle
occupants totheir immediate sur roundings when
opening and closing the con venience doo rs. The
ve hicle occupants are alw aysre sponsible for
opening and closing the doors safel y.
Det
Det ection r
ection r ang
ange of t
e of t he sensors
he sensors 1
appr oximately 1 m
* N
NOOTE
TE Risk of an accident from objects at
close range Object
recognition may not de tect cer tain
objects at close range. #
When opening the con venience doo rs,
pay particular attention tolow objects
and obstacles in the side window area.
Object de tection does not alw ays de tect
such objects at close range, especially
during mo vement. The vehicle or other
objects could otherwise be damaged. *
N
NOOTE
TE Risk of accident due tofaulty sen-
sors The sensors may malfunction because of snow
or due
toobjects that absorb ult rasonic
wav es. #
Make sure that the con venience doo rs
are free from dirt, ice or slush. #
Be especially careful when opening the
con venience doo rsifot her ult rasonic
sources are near by. *
N NO
OTE
TE Risk of accidents if the de tection
per form ance of the sensors in the con ve-
nience doo rsisrestric ted If
th e sensors are co vered, the con venience
doo rscannot function reliabl y. #
Do not apply sti ckers, foils or other coat-
ings tothe outside of the con venience
doo rs.
The sensors may otherwise be bloc ked
and obs tacles may not be de tected or
only de tected toa limi tedex tent. 90
90
Opening and closing

5
Corner radars
6 Ultrasonic sensors
7 Reversing camera &
W
WARNING
ARNING Risk of accident due torestric-
te d de tection per form ance of vehicle sen-
sors and cameras
If th e area around vehicle senso rsor cameras
is co vered, damaged or dirty, cer tain driving
and saf ety sy stems cannot function co rrectl y.
There is a risk of an accident. #
Keep the area around vehicle senso rsor
cameras clear of any obst ructions and
clean. #
Have damage tothe bumper, radiator
gr ille or stone chipping in the area of the
front and rear wind owsre paired at a
qu ali/ed specialist workshop. Pa
rticular ly,ke ep the areas around the sensors
and cameras free of dirt, ice or slush
(/ page 373). The sensors and cameras must
not be co vered and the de tection ranges around
th em must be kept free. Do not at tach additional licence plate brac
kets, advertisements, stic kers,
fo ils or foils toprotect against stone chippings in
th e de tection range of the sensors and cameras.
Make sure that there are no overhanging loads
pr otru ding into the de tection range.
If th ere is damage toa bumper or thera diator
gr ille, or aTer an impact, ha vethe function of the
senso rschecked at a quali/ed specialist work-
shop. Ha vedamage or stone chipping in the area
of the cameras on the front and rear wind ows
re paired at a quali/ed specialist workshop.
% The reve rsing camera can extend and retract
automatically forth e purpose of calibration,
ev en though there is no camera image in the
displa y. Ov Ov
er
ervie
vie w of dr
w of dr iving syst
iving syst ems and dr
ems and dr iving safe
iving safe ty
ty
syst
syst ems
ems R
ABS (/ page 219)
R BAS (/ page 219)
R ESP ®
(/ page 220)
R ESP ®
Crosswind Assist (/ page 221) R
ESP ®
trailer stabilisation (/ page 221)
R EBD (/ page 222)
R STEER CONTROL (/ page 222)
R HOLD function (/ page 222)
R Hill Start Assist (/ page 223)
R Adaptive Brake Lights (/ page 224)
R Valet service mode (/ page 224)
R Beginner driver mode (/ page 225)
R ATTENTION ASSIST (/ page 225)
R Cruise cont rol (/ page 227)
R Limiter (/ page 228)
R Speed Limit Assist (countr y-dependent)
(/ page 250)
R Tra1c Sign Assist (/ page 251)
R Tra1c light view (/ page 255)
R AIRMATIC (/ page 262)218
218
Driving and parking

R
Longitudinal/la tera l acceleration
R Steering angle
R Engine speed
R Engine oil/tyre tempe rature
Based on the anal ysis yo u can check and optimise
driving characteristics for any position on the
trac k.
Expor
Expor ting tr
ting tr ack
acks (USB)
s (USB) #
Select õTracks.
An ove rview of all stored trac ksappears. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Export track to… .
The selec ted track can be expor tedto a USB
storage device connected totheve hicle.
Editing tr
Editing tr ack
acks and r
s and r ecor
ecordings
dings #
Select õTracks. #
Select the desired trac k. #
Select options uforth e desired trac k. #
Select Rename orDelete.
or #
Select a trac k. #
Highlight the desired recording. #
Select uoptions. #
Select Exporting to… orDelete. Se
Se
tting Dr
tting Dr ag R
ag Race
ace Multimedia system:
4 TRACK PACE 5
Drag Race
Measur
Measur ing acceler
ing acceler ation
ation #
Select ZDrag race options. #
Select Acceleration. #
Set a starting speed or select Automatic.
Measurement begins as soon as the speci/ed
starting speed has been reached. #
Set a targetspeed.
Measu rement stops as soon as the speci/ed
targ etspeed has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Measu
rement can be stopped ear lyby inter rupt-
ing the acceleration procedure.
Quart
Quart er
er-mile r
-mile r ace
ace #
Select ZDrag race options. #
Select Quarter-mile. #
Set a targetdistance.
Measurement stops as soon as the speci/ed
targ etdistance has been reached. #
Pull away and startthe measurement.
Measurement begins when theve hicle accel-
erates. Timing runs until thetarg etdistance or
a maximum of one mile has been tr avelled.
Measurement can be stopped ear lyby inter rupt-
ing the acceleration procedure.
Measur
Measur ing br
ing braking
aking #
Z Drag race options #
Select Braking. #
Set a starting speed or select Automatic. #
Pull away and startthe measurement. MBUX multimedia system
327
327

To
avo id damage totheve hicle, deactivate
th ese systems in thefo llowing or similar situa-
tions: #
During towing. #
In a car wash. *
N
NO OTE
TE Damage due tounsuitable car wash #
Before driving into a car wash make sure
th at the car wash is suitable forth eve hi-
cle dimensions. #
Ensu rethere is su1cient ground clear-
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is su1cient. To
avo id damage toyour vehicle when using a car
wa sh, ensu rethefo llowing beforehand:
R Active Distance Assist DISTRONIC is deactiva-
te d.
R The HOLD function is switched o.. R
The 360° Camera or there ve rsing camera is
switched o..
R The vehicle is loc ked and the door handles
re tracted.
R The side windo wsand sliding sunroof are com-
ple tely closed.
R The blo werfo rth eve ntilation and heating is
switched o..
R The windsc reen wiper switch is in position g.
R The key is at a minimum dis tance of 6 m away
from theve hicle. Otherwise the boot lid or a
door could open unintentionall y.
R For car washes with a con veyo r system:
- Neutral iis engaged.
- The vehicle is loc ked from inside.
% If, aTer the car wash, youre mo vethewax
from the windscreen and wiper rubbers, this
will pr event smearing and reduce wiper noise. Inf
Inf
or
ormation on using a high-pr
mation on using a high-pr essur
essure cleaner
e cleaner &
W
WARNING
ARNING Risk of an accident when using
high-pressure cleaners with round-spr ay
nozzles
The water jet can cause extern ally invisible
damage.
Components damaged in this wa y may un ex-
pectedly fail. #
Do not use a high-pressure cleaner with
round-spr aynozzles. #
Have damaged tyres or chassis parts
re placed immediatel y. To
avo id damage toyour vehicle, obser vethefo l-
lowing when using a high-pressure cleaner:
R The key is at a minimum dis tance of 3 m away
from theve hicle. Otherwise the boot lid or a
door could open unintentionall y.
R Maintain a distance of at least 30 cm tothe
ve hicle.
R V Vehicles wit
ehicles wit h decor
h decorativ
ative f
e foil:
oil: Parts of your
ve hicle are co vered with a decorative foil. Maintenance and care
371
371

Maintain a distance of at least 70 cm between
th efo il-co vered parts of theve hicle and the
nozzle of the high-pressure cleaner. Mo vethe
high-pressure cleaner nozzle around whilst
cleaning. The waterte mp erature of the high-
pressure cleaner must not exceed 60°C.
R Obser vethe information on the cor rect dis-
ta nce in the equipment manufacturer's opera-
to r manual.
R Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts such as
tyres, gaps, electrical component parts, bat-
te ries, illuminants and louvres. W W
ashing t
ashing t he v
he vehicle b
ehicle b y hand
y hand Obser
vethere leva nt legal requ irements (e.g. in
some countries, washing byhand is permitted
only in special lydesignated wash ba ys). #
Use a mild cleaning agent (e.g. car shampoo). #
Washtheve hicle with luk ewarm water using a
soT car sponge. When doing so, do not
ex pose theve hicle todirect sunlight. #
Carefully hose theve hicle o. with water and
dry using a chamois.
% Obser vethe no tes on the care of car parts
(/ page 373). N No
ot
tes on paintw
es on paintw or
ork/matt
k/matt /nish
/nishpaintw
paintw or
ork care
k care To
avo id damaging the paintwork and inter fering
with the driving assistance systems, please
obser vethefo llowing no tes:
P
P aint
aint
R Insect remains: Soak with insect remo ver and
ri nse o. the treated areas aTer wards.
R Bird droppings: Soak with water and rinse o.
aTer wards.
R Tree resin, oils, fuels and greases: remo veby
ru bbing gently with a clo thsoaked in petro-
leum ether or lighter 0uid.
R Coolant and brake 0uid: remo vewith a damp
clo thand clean water.
R Tar stains: use tarre mo ver.
R Wax: use silicone remo ver. R
Do not attach sti ckers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a quali/ed specialist workshop.
R Remo vedirt immediatel y,where possible.
Matt
Matt /nish
/nish
R Only use care products appr ovedfor
Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als. Only ha ve/lm attached tothe bumper at
a qu ali/ed specialist workshop.
R Do not polish theve hicle and light-alloy
wheels.
R Only use car washes that cor respond tothe
latest engineering standards.
R Do not use car wash prog rammes with a /nal
hot wax treatment.
R Do not use paint cleaners, bu1ng or polishing
products, gloss preser vers,e. g. wa x.
In theev ent of paintwork damage:
R Always ha vepaintwork repairs car ried out at a
qu ali/ed specialist workshop. 372
372
Main
tenance and ca re

R
Make sure thera dar sensors function
(/ page 217). N
No
ot
tes on cleaning decor
es on cleaning decor ativ
ative f
e foils
oils Obser
vethe no tes on matt /nish care in thech ap-
te r "No tes on paintwork/matt /nish paintwork
care" (/ page 372). They also apply tomatt dec-
orative foils.
Obser vethe no tes on cleaning decorative foils to
avo id damage.
Cleaning
Cleaning
R For cleaning, use plenty of water and a mild
cleaning agent without additives or abrasive
substances (e.g. a car shampoo appr ovedfor
Mercedes-Benz).
R Remo vedirt as soon as possible. Avoid rub-
bing too hard in order tonot ir reparably dam-
age the decorative foil.
R Ifth ere is dirt on the /nish or if the decorative
fo il is dull: Use thePa int Cleaner recommen-
ded and appr ovedfo r Mercedes-Benz.
R Insect remains: Soak with insect remo ver and
ri nse o. the treated areas aTer wards. R
Bird droppings: Soak with water and rinse o.
aTer wards.
R Topreve ntwa ter stains, dry a foil-wrapped
ve hicle with a soT, absorbent clo thaTer every
car wash.
A
A v
voiding damag
oiding damag e t
e to t
o t he decor
he decor ativ
ative f
e foil
oil
R The service life and colou ring of decorative
fo ils are impaired by:
- Sunlight
- Temp erature (e.g. hot air blo wer)
- Weather conditions
- Stone chippings and dirt
- Chemical cleaning agents
- Oily products
R Do not use polish on matt decorative foil. Po l-
ishing will ha vethe e.ect of shining thefo il-
wrapped sur face.
R Do not treat matt or st ructured decorative
fo ils with wax.Pe rm anent stains may occur.
Scratches, cor rosive deposits, areas a.ected by
cor rosion and damage caused byincor rect care cannot alw
ays be comple tely rep aired. In this
case, contact a quali/ed specialist workshop.
Yo u can obtain more information on care and
cleaning agents from the manufacturer.
In the case of foil-wrapped sur faces, optical di.er-
ences may occur between the sur faces that we re
not pr otected bya decorative foil aTer removing a
decorative foil.
% Have workor repairs todecorative foils car-
ri ed out at a quali/ed specialist workshop
(e.g. in a Mercedes-Benz Se rvice Centre). N
No
ot
tes on car
es on car e of car par
e of car par ts
ts &
W
WARNING
ARNING Risk of entrapment if the wind-
screen wipers are switched on while the
windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe wiper
arm. Maintenance and care
373
373

R
Do not clean the ball neck with a high-pres-
sure cleaner or sol vent.
R Remo vetraces of rust on the ball (e.g.using a
wire brush).
R Remo vedirt with a lint-free clo th.
R ATer cleaning, lightly oil or grease the ball
head.
% Before using trailers with anti-torsional cou-
pling, obser vethe manufacturer's operator
manual. N No
ot
tes on car
es on car e of t
e of the int
he int er
erior
ior &
W
WARNING
ARNING Risk of injury from plastic parts
breaking o. aTer the use of sol vent-based
ca re products
Care and cleaning products containing sol-
ve nts can cause sur faces in the cockpit to
become porous. When the airbags are
deplo yed, plastic parts may break away. #
Do not use any care or cleaning products
containing sol vents toclean the cockpit. &
W WARNING
ARNING Risk of injury or fatal injuries
from bleached seat belts
Bleaching or dyeing seat belts can se verely
we aken them.
This can, forex ample, cause seat belts to tear
or fail in an accident. #
Never bleach or dye seat belts. To
avo id damage totheve hicle, obser vethefo l-
lowing no tes on cleaning and care:
Seat belts
Seat belts R Clean with luk ewarmand soapy water.
R Do not use chemical cleaning agents.
R Do not dry byheating them toove r 80°C or
ex posing them todirect sunlight.
Display
Display
R Switch o. the display and let it cool down.
R Clean the sur face carefully with a micro/bre
clo thand a suitable displ aycare product (TFT-
LC D).
R Do not use any other agents. Head-up displ
ay
Head-up display
R Clean with a soT, non-static, lint-free clo th.
R Do not use cleaning agents.
Plas
Plastic tr tic tr im
im
R Clean with a damp micro/bre clo th.
R For heavy soiling: Use a cleaning agent recom-
mended for Mercedes-Benz.
R Do not attach stic kers, /lms or similar materi-
als.
R Do not allow cosmetics, insect repellent or
sun cream tocome in contact with the plastic
trim.
R
R eal w
eal w ood and tr
ood and tr im elements
im elements
R Clean with a micro/bre clo th.
R Blackpiano-lacquer look: Clean with a damp
clo thand soapy water.
R For heavy soiling: Use a cleaning agent recom-
mended for Mercedes-Benz.
R Do not use sol vent-based cleaning agents, pol-
ishes or waxes.
R
R oof lining
oof lining
R Clean with a brush or dry shampoo. Main
tenance and ca re
375
375

Car
Car
pet
pet
R Use a carpet and textile cleaning agent recom-
mended for Mercedes-Benz.
St
St eer
eer ing wheel made of g
ing wheel made of g enuine leat
enuine leather or DINA-
her or DINA-
MICA
MICA
* NO
NOTE
TEDamage caused bywrong cleaners #
Do not use sol vent-based cleaning
agents such as tarre mo ver or wheel
cleaner; neither should you use polishes
or wa xes. Otherwise you may damage
th e /nish. R
Clean with a damp clo thand 1% soapy water
solution and then wipe with a dry clo th.
R For heavy soiling: Use a cleaning agent recom-
mended for Mercedes-Benz.
R Leather care: Use a leather care agent that
has been recommended for Mercedes-Benz.
R Do not allow the leather tobecome too damp.
R Do not use a micro/bre clo th.
% Leather is a natural product. It exhibits natural
sur face properties such as di.erences in st
ru cture, mar kscaused bygrow thand injury
or subtle colour di.erences. These sur face
properties are characteristics of leather and
not material faults. What's more, leather is
subject toa natural ageing process during
which the sur face properties change.
Genuine leat
Genuine leat her seat cov
her seat covers
ers
R Vacuum away dirt (e.g. crumbs or dust) and
th en clean the seat co vers with a damp cotton
clo thand wipe down with a dry clo th.Re gu-
lar lyclean the seat co vers.
R For heavy soiling: use a leather care agent rec-
ommended for Mercedes-Benz aTercare.
R Leather care: Use a leather care agent that
has been recommended for Mercedes-Benz.
R Do not use a micro/bre clo th.
R Do not allow the leather tobecome too damp.
R Do not use oil-based cleaning and care prod-
ucts.
% Leather is a natural product. It exhibits natural
sur face properties such as di.erences in
st ru cture, mar kscaused bygrow thand injury
or subtle colour di.erences. These sur face properties are
characteristics of leather and
not material faults. What's more, leather is
subject toa natural ageing process during
which the sur face properties change.
Re gular cleaning and care ofthe leather
re duces soiling, wear mar ksand ageing dam-
age and thus signi/cant lyex tends its life
span. Clo thing that can lea vestains (e.g.
jeans) can discolour the leather.
DIN
DINAMIC AMIC A seat cov A seat cov ers
ers
R Clean with a damp clo th.
R Do not use a micro/bre clo th.
Imit
Imit ation leat
ation leat her seat cov
her seat cov ers
ers
R Vacuum up dirt such as crumbs or dust and
th en use a damp cotton clo thand a 1% soap-
suds solution toclean the entire seat co ver.
Do not spot clean.
R Use cleaning and care products recommen-
ded for Mercedes-Benz.
R Do not use a micro/bre clo th.
R Do not use oil-based cleaning and care prod-
ucts. 376 376
Maintenance and care