2022 MAZDA MODEL MX-30 EV Owners Manual

Page 33 of 547

MAZDA MODEL MX-30 EV 2022  Owners Manual When transporting cargo, do not
allow the cargo to exceed the height
of the seatbacks.
Transporting cargo stacked higher than
the seatbacks is dangerous as visibility
to the rear and sides of the vehi

Page 34 of 547

MAZDA MODEL MX-30 EV 2022  Owners Manual raise the seatback while preventing
the seat belt from being caught in
the seatback.
 
1. Red indication
2. Seat belt guide
 
2. Press the seatback rearward and lock it in place. After returning the
s

Page 35 of 547

MAZDA MODEL MX-30 EV 2022  Owners Manual Head Restraints
▼Head Restraints
Your vehicle is equipped with head
restraints on all outboard seats and the
rear center seat. The head restraints are
intended to help protect you and the
passengers

Page 36 of 547

MAZDA MODEL MX-30 EV 2022  Owners Manual WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
installed:
Driving with the head restraints not
installed is dangerous. With no suppor

Page 37 of 547

MAZDA MODEL MX-30 EV 2022  Owners Manual To fold the head restraint, pull the
strap.
 
To return the head restraint to its
upright position, lift it upward.
After lifting up the head restraint to its
original position, make sure that it is
s

Page 38 of 547

MAZDA MODEL MX-30 EV 2022  Owners Manual Seat Warmer*
▼Seat Warmer
The front seats can be warmed up
while the EV system is operating.
WARNING
Be careful when using the seat
warmer:
The heat from the seat warmer may be
too hot for the follo

Page 39 of 547

MAZDA MODEL MX-30 EV 2022  Owners Manual 3. Mid
4. Low
NOTE
When the ,  is swiped upward,
the temperature changes to high.
When it is swiped downward, the
seat warmer changes to OFF.
The seat warmer does not operate
when the EV system

Page 40 of 547

MAZDA MODEL MX-30 EV 2022  Owners Manual If the  or  is operated during
auto mode, the seat warmer on the
side where the icon was operated
switches to manual mode. To return
to auto mode, press the AUTO
switch.
If the power switch is s