2022 HYUNDAI ELANTRA HYBRID trunk

Maintenance
9-56
Reverse lamp (Inner lamp)
(Bulb type)
1. Disconnect the connector and then
remove the nuts by turning the nuts
counter clockwise.
2. Take the light assembly out.
OCN7080053OCN7080053
3. Remove the socket from the assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on the
assembly.
4. Remove the bulb by pulling it out.
5. Insert a new bulb by inserting it into the socket.
6. Install the light assembly to the trunk.
7. Reinstall the trunk lid cover by pushing in the screw.
Stop/Tail lamp and rear side marker (LED type)
If the LED lamp does not operate, we
recommend that you have the vehicle
checked by an authorized HYUNDAI
dealer.
The LED lamps cannot be replaced as
a single unit because it is an integrated
unit. The LED lamps has to be replaced with the unit.
A skilled technician should check or
repair the LED lamp, for it may damage
related parts of the vehicle.

09
9-57
High Mounted Stop Lamp
Replacement
OCN7080032OCN7080032
OAD075042OAD075042
[A] : High mounted stop lamp
1. Open the trunk.
2. Remove the socket by turning it
counterclockwise until the tabs on the
socket align with the slots.
3. Remove the bulb from the socket by pressing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
4. Insert a new bulb by inserting it into the socket and rotating it until it locks
into place.
5. Install the socket in the assembly by aligning the tabs on the socket with
the slots in the assembly.
Push the socket into the assembly and
turn the socket clockwise.
License Plate Light Bulb
Replacement
OCN7H090020OCN7H090020
1. Using a flat-blade screwdriver gently pry the lens cover from the lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb.
4. Reinstall in the reverse order.

Maintenance
9-58
Interior Light Bulb Replacement
Map lampMap lamp
OCN7080033OCN7080033
Room lampRoom lamp
OCN7080034OCN7080034
Sunvisor lampSunvisor lamp
OCN7050058OCN7050058
Trunk room lampTrunk room lamp
OCN7H050006OCN7H050006
1. Using a flat-blade screwdriver, gently pry the lens from the interior lamp housing.
2. Remove the bulb by pulling it straight out.
WARNING
Prior to working on the Interior Lights, ensure that the “OFF” button is depressed to
avoid burning your fingers or receiving an electric shock.
3. Install a new bulb in the socket.
4. Align the lens tabs with the interior lamp housing notches and snap the lens into place.
NOTICE
Use care not to dirty or damage lens, lens tab, and plastic housings.

I
I-11
Tire Sidewall Labeling ..................................................................................... 9-31
Tire Terminology and Definitions .................................................................... 9-34
Tire Traction ..................................................................................................... 9-31
Wheel Alignment and Tire Balance ................................................................. 9-29
Wheel Replacement .......................................................................................... 9-31
Towing ................................................................................................................. 8-22
Emergency Towing ................................................................................ 8-23, 8-24
Removable Towing Hook ................................................................................. 8-24
Trailer Towing ..................................................................................................... 6-52
Trunk .................................................................................................................... 5-49
Emergency Trunk Safety Release..................................................................... 5-50
Smart Trunk Release ........................................................................................ 5-51
V
Vehicle Break-In Process ....................................................................................... 1-7
Vehicle Certification Label .................................................................................. 2-13
Vehicle Data Collection and Event Data Recorders ..............................................1-8
Vehicle Identification Number (vin) .................................................................... 2-13
Vehicle Load Limit .............................................................................................. 6-48
Tire Loading Information Label ....................................................................... 6-48
Vehicle Modifications ............................................................................................ 1-7
Volume and Weight .............................................................................................. 2-10