2022 CITROEN C1 Owners Manual

87
C1_en_Chap04_conduite_ed01-2016
Switching on
F Press  the   end   of   the   control   stalk:   the  s
peed   limiter   mode   is   selected   but   is   not  
s

witched   on.
F
 
S
witch   the   speed   limiter   on   by   pulling   the  
c

ontrol   stalk   towards   you,   if   the   speed  
d

isplayed   is   suitable   (by   default,   the   last  
s

peed
 pro
grammed). Once
  the   function   is   selected,   you   can   modify  
t

he   speed   setting   by:
-  
b
y   pushing   the   control   stalk   up   to   increase  
t

he
 se
tting,
-  
b
y   pushing   the   control   stalk   down   to  
d

ecrease
 t
he
 se
tting.
A   brief   push   on   the   control   stalk   modifies   the  
s

peed   setting   by   +   or   -   1   mph   (km/h).
A   maintained   push   on   the   control   stalk   modifies  t
he   speed   setting   by   +   or   -   5   mph   (km/h).
Adjusting the speed limit
setting
You do not have to switch the speed l
imiter   on   in   order   to   set   the   speed.
Pause
F You  can   temporarily   stop   the   the   speed  l
imiter   by   pulling   the   control   stalk   towards  
y

ou   again:   the   display   confirms   that   it   has  
b

een   stopped   (Pause).
F
 
P
ull   the   control   stalk   towards   you   again   to  
r

estore   the   speed   limiter.
4
Driving

88
C1_en_Chap04_conduite_ed01-2016
Switching off
F Press  the   end   of   the   control   stalk. T
he   display   of   information   related   to   the  
sp

eed
 l
imiter
 d
isappears.
Operating fault
Illumination of this warning lamp in the   instrument   panel   indicates   a   fault  
w

ith   the   speed   limiter.
Have
  it   checked   by   a   CITROËN  
d

ealer   or   a   qualified   workshop.
The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   speed   limiter.
To
 
avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Temporarily exceeding the
programmed speed
F Press f irmly  on   the   accelerator   pedal,  g
oing   beyond   the   point of resistance, to
exceed
  the   programmed   speed   limit.
The
  speed   limiter   is   deactivated   temporarily  
a

nd   the   displayed   programmed   speed   flashes.
As
  soon   as   the   vehicle's   speed   returns   to   the  
p

rogrammed   value,   the   limiter   operates   again:  
t

he   display   of   the   programmed   speed   becomes  
s

teady   again.
An
  audible   signal   accompanies   the  
f

lashing   of   the   programmed   speed  
w

hen   exceeding   the   speed   is   not   due   to  
a

n   action   by   the   driver   (steep   hill...).
Driving

89
C1_en_Chap04_conduite_ed01-2016
Speed limiter (VTi 68 engine)
System which prevents the vehicle from exceeding the speed programmed by the driver.
T he   speed   limiter   is   switched on
 m
anually:
 t

his   can   be   done   whatever   the   speed   of   the  
v

ehicle.   However,   if   you   are   driving   at   less   than  
2

0   mph   (30   km/h),   the   programmed   speed   will  
b

e   fixed   at   20   mph   (30   km/h).
The
  speed   limiter   is   paused by operation of the
control.
The
  programmed   speed   can   be   exceeded  
t

emporarily   by   pressing   the   accelerator   firmly  
b

eyond   the   point   of   resistance.
To
  return   to   the   programmed   speed,   simply  
r

elease   the   accelerator   pedal   until   the   vehicle  
r

eturns   to   the   programmed   speed   limit.
The
  programmed   limit   speed   is   erased  
w

hen   switching   off   the   ignition.
Steering mounted controls
The controls are grouped together on this control   stalk   at   the   steering   wheel.
1.
 S

peed   limiter   on   /   off:   by   pressing   the   end  
o

f   the   control   stalk.
2.
 P

rogramming   the   speed
 D

ecrease   the   setting:   by   pushing   the  
c

ontrol   stalk   down.
3.
 R

estore   speed   limiter
 I

ncrease   the   setting:   by   pushing   the   control  
s

talk   up.
4.
 P

ause   speed   limiter:   by   pulling   the   control  
s

talk   towards   you.
Displays in the instrument panel
The information is grouped together in the instrument   panel   screen.
5.
 S

peed   limiter   on   /   pause   indication.
6.
 S

peed   value   setting.
The speed limiter cannot, in any circumstances,   replace   the   need   to   observe s

peed   limits,   nor   can   it   replace   the   need   for
 v

igilance   on   the   part   of   the   driver.
If you choose to display other information (trip  A
  for   example),   the   speed   limiter  
i

nformation   is   automatically   displayed   again  
a

fter   about   6   seconds.
4
Driving

90
C1_en_Chap04_conduite_ed01-2016
F Press  the   end   of   the   control   stalk:   the  s
peed   limiter   is   switched   on.
F
 
A
ccelerate   or   decelerate   to   attain   the  
de

sired
 s
peed.
F
 
P
ush   the   control   stalk   down   and   release,   to  
p

rogramme   the   speed.
 T

he   speed   at   which   the   vehicle   is   running  
a

t   the   moment   when   you   release   the  
c

ontrol   stalk   becomes   the   programmed  
s

peed.
Adjusting the speed limit
setting
Once a speed is programmed, you can modify it   by   pushing   and   releasing   the   control   stalk:
-
 
u
p   to   increase   the   speed   setting,
-
 
d
own   to   reduce   the   speed   setting.
A
  brief   push   on   the   control   stalk   modifies   the  
s

peed   setting   by   +   or   -   1   mph   (km/h).
A
  maintained   push   on   the   control   stalk   modifies  
t

he   speed   setting   by   +   or   -   5   mph   (km/h).
Switching on
This indicator lamp comes on in the instrument pan el.
Pause
F You  can   temporarily   stop   the   the   speed  l
imiter   by   pulling   the   control   stalk   towards  
yo

u.
F
 
P
ush   the   control   stalk   up   to   restore  
o

peration   of   the   speed   limiter   with   the  
s

ame   speed   setting.
Driving

91
C1_en_Chap04_conduite_ed01-2016
Switching off
F Press  the   end   of   the   control   stalk T
he   display   of   information   related   to   the  
sp

eed
 l
imiter
 d
isappears.
Operating fault
Illumination of this warning lamp in the   instrument   panel   indicates   a   fault  
w

ith   the   speed   limiter.
The
  use   of   mats   not   approved   by  
C

ITROËN   may   inter fere   with   the  
o

peration   of   the   speed   limiter.
To
 
avoid   any   risk   of   jamming   of   the  
ped

als:
-
 
e
nsure   that   the   mat   is   secured  
c

o r r e c t l y,
-
 
d
o   not   fit   one   mat   on   top   of   another.
Temporarily exceeding the
programmed speed
F Press f irmly  on   the   accelerator   pedal,  g
oing   beyond   the   point of resistance,
to
exceed
  the   programmed   speed   limit.
The
  speed   limiter   is   deactivated   temporarily  
a

nd   the   displayed   programmed   speed   flashes.Have
  it   checked   by   a   CITROËN   dealer   or   a  
q

ualified
 w
orkshop.
An
  audible   signal   accompanies   the  
f

lashing   of   the   programmed   speed  
w

hen   exceeding   the   speed   is   not   due   to  
a

n   action   by   the   driver   (steep   hill...).
As
  soon   as   the   vehicle's   speed   returns   to   the  
p

rogrammed   value,   the   limiter   operates   again:  
t

he   display   of   the   programmed   speed   becomes  
s

teady   again.
4
Driving

92
C1_en_Chap04_conduite_ed01-2016
Reversing camera
The reversing camera is activated automatically when reverse gear is engaged.
T he   reversing   camera   cannot   in   any  
c

ircumstances   replace   the   need   for   the  
v

igilance   on   the   part   of   the   driver.The
  image   is   provided   in   the   touch   screen  
o

nly,   with   an   indication   of   the   limit   of   the   rear  
b

umpers   (red   line)   and   the   general   direction   of  
t

he   vehicle   (blue   lines).Clean
  the   reversing   camera   regularly  
u

sing   a   soft,   dry   cloth.
The
  field   of   vision   covered   by   the   camera   is  
l

imited:   objects   in   the   immediate   proximity   of  
t

he   bumper   or   located   below   it   are   not   visible.
The
  camera's   wide-angle   lens   deforms   the  
i

mage   presented   in   the   screen:   the   distances  
v

isible   in   the   screen   may   be   different   from  
t

he   true   distances.   This   deformation   varies  
a

ccording   to   the   loading   of   the   vehicle   and   the  
s

lope   of   the   road.
High pressure jet washing
When
  washing   your   vehicle,   do   not  
d

irect   the   lance   within   30   cm   of   the  
c

amera   lens.
Never
  reverse   the   vehicle   looking   only  
a

t   the   screen.
It
  is   normal   to   be   able   to   see   part   of   the   number  
p

late   at   the   bottom   of   the   screen.
Driving

93
C1_en_Chap04_conduite_ed01-2016
Lane departure warning system
System which detects the unintended crossing of longitudinal traffic lane markings on the ground, using a camera that recognises both solid and broken   lines.
To
  improve   your   safety,   the   camera   analyses   the   image   and   then   triggers   a   warning   if   the   vehicle   wanders   over   a   lane   marking   (speed   higher   than  
3

0 mph   (50   km/h)).
This
  system   is   particularly   suitable   for   motor ways   and   dual   carriageways.
The
  lane   departure   warning   system  
c

annot   in   any   circumstances   replace  
t

he   need   for   vigilance   on   the   part   of   the  
d

river.
It
  is   necessary   to   observe   driving  
r

egulations   and   take   a   break   every  
two
  hours.
Activation
F Press  this   button,   located   on   the   steering  w
heel.
Detection
You are alerted by an audible signal and the display   of   a   warning   lamp   in   the   instrument   panel.
No
  alert   is   given   if   the   direction  
i

ndicators   are   on   and   for   around  
20
  seconds   after   they   stop   flashing.
The
 
s

ystem
 
s

hould
 
b

e
 
d

eactivated
 
w

hen
 
d

riving
 
with
 
snow
 
chains
 
or
 
the
 
spare
 
w

heel
 
fitted.
4
Driving

94
C1_en_Chap04_conduite_ed01-2016
Deactivation
Operating faultDisplays in the instrument panel
The detection may be impeded:
-  i f   the   ground   markings   are   worn,
-
 
i
f   there   is   little   contrast   between   the   markings   on   the   ground   and   the   road   sur face,
-
 
i
f   the   windscreen   is   dirty,
-
 
i
n   certain   extreme   weather   conditions:   fog,   heavy   showers,   bright   sunlight   or   direct  
e

xposure   to   the   sun   (low   sun,   leaving   a   tunnel...)   and   shadows.F
 
P
ress   this   button   again.
The   status   of   the   system   remains   in   the  
m

emory   when   the   ignition   is   switched   off.
In the event of a malfunction, this (orange) w
arning   lamp   comes   on   in   the   instrument   panel.
Contact a CITROËN dealer or a qualified workshop   without   delay.
Display
 
in
 
the
 
instrument
 
panel
Comments
The
 
function
 
has
 
been
 
activated
 
(green
 
indicator).
The
 
system
 
has
 
identified
 
a
 
marking
 
on
 
the
 
ground
 
(green
 
i

ndicator).
The
 
system
 
is
 
alerting
 
you
 
that
 
a
 
road
 
marking
 
is
 
being
 
crossed
 (

green
 
and
 
orange
 
warning).
The
 
display
 
of
 
this
 
warning
 
is
 
accompanied
 
by
 
an
 
audible
 
signal.
Driving