Page 1297 of 1808
to
switch to the high beams. The high-beam
indicator light illuminates. (
Page 1298 of 1808
switch is pushed to the OFF position.position, the headlight must be off. Turn
the headlight switch to the
position
for full illumination when driving at night.
If the parking brake is applied before the
engine is started, the daytime running
lights do not illuminate. The daytime
running lights illuminate once the parking
brake is released. The daytime running
lights will remain on until the ignition
switch is pushed to the OFF position or
the headlights turn on.
Turn signal
Move the lever up or down to signal the
turning direction. When the turn is com-
pleted, the turn signals cancel automati-
cally.
Page 1299 of 1808
CAUTION
.Do not put anything on the seat
which insulates heat, such as a
blanket, cushion, seat cover, etc.
Otherwise, the seat may become
overheated.
. Do not place anything hard or
heavy on the seat or pierce it with
a pin or similar object. This may
result in damage to the heater.
. Any liquid spilled on the heated
seat should be removed immedi-
ately with a dry cloth.
HORN HEATED SEATS
Page 1300 of 1808
on the
switch will turn off when the system is
turned off. If the indicator light flashes it
may indicate a malfunction in the sonar
system.
(
Page 1301 of 1808
Next to the steering wheel
Pull out the cap to use the outlet.
Replace the cap after use.
POWER OUTLETS
Page 1302 of 1808
Instruments and controls
2-61
E-CALL (SOS) BUTTON
Page 1303 of 1808
Page 1304 of 1808
CAUTION
.Avoid abrupt starting and braking
when the cup holder is being
used to prevent spilling the drink.
If the liquid is hot, it can scald you
or your passenger.
. Use only soft cups in the cup
holder. Hard objects can injure
you in an accident.
FrontSlide the cover toward the rear of the
vehicle to open.
To close, slide the cover back toward the
front of the vehicle.
Instruments and controls
2-63
STORAGE