#
Pull there lease handles forre ar seat anchor‐
age 2up and tilt there ar ben chseat. #
Grasp there ar ben chseat bygrab handles 1
and fold the seat forw ards.
Installing and removing the comfort rear
ben chseat &
WARNING Risk of accident and inju ryas
a re sult of rear ben chseat not being
engaged
If th ere ar ben chseat is not engaged, it may
be flung around during tra vel. #
Always make sure that there ar ben ch
seat is engaged as described. Ke
ep the seat anchorages in theve hicle floor free
of dirt and objects at all times toensure that the
re ar ben chseat engages securel y.
If th e indicator tab of the anchorage is not retrac‐
te d into the seat leg, the seat is not cor rectly
engaged. Engage the seat again.
Re moving the rear ben chseat %
In
vehicles with a seat rail sy stem, car ryout
th ere lease, remo val and subsequent reins tal‐
lation of there ar ben chseats at the mar ked
basic position only (/ page 79).#
Make sure that all sliders forfo re -and-aft
adjustment are engaged on bo thsides.
It should not be possible tomo vethere ar
ben chseat. #
Foldthere ar ben chseat forw ards
(/ page 80). #
Pull release handle 3upwards. #
Grasp there ar ben chseat bygrab handles 1
and lift it out of seat anchorages 4.
% If
th e second rear seat rowisto be remo ved
or tilted, the seat or bench seat in thefirst
re ar seat rowmust firs t be til tedfo rw ard to
avo id damage tothe seats.
Installing there ar ben chseat #
Grasp there ar ben chseat bygrab handles 1
and insert it into front seat anchorages 4
from the front and abo veat an angle. #
Tilt th ere ar ben chseat back and allow it to
engage.
Re lease handles 2fold down towa rdsthe
ve hicle floor. #
Foldthere ar ben chseat back into the seat
position.
The rear seat legs of there ar ben chseat are cor‐
re ctly engaged when the seat legs engage audibly
and the indicator tabs on the seat legs are no lon‐
ge r visible and ha vefully retracted into the seat
legs. #
Slide there ar ben chseat into the basic set‐
ting (/ page 79).
Using the EAS Y-ENT RYeasy entry and exit
fe ature (rear seat) &
WARNING Risk of accident‑ and injury if
th e seat is not engaged
If a seat is not engaged, it may be thrown
about while theve hicle is moving. #
Always make sure that all seats are
engaged as desc ribed. In order
toensure that the seats can securely
engage, keep the seat guide rails and anchorages
in theve hicle floor free from dirt and fore ign
objects. &
WARNING Risk of becoming trapped
when adjusting the seats
When you adjust a seat, you may trap your‐
self or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. Seats and
stowage 81
1
Release handle for seat fore -and-aft adjust‐
ment
2 Fore-and-aft setting marking
0049 Basic setting marking
St arting from the basic setting 0049,there ar seats
fo r passengers can be mo vedfo rw ards or back‐
wa rdsby 5 cm. In doing so, make sure that pas‐
sen gers have suf ficient legroom toreduce the
ri sk of injury during braking. #
Pull release handle 1inthe direction of the
ar row. #
With th ere lease handle pulled, slide there ar
seat tothe desired position. #
Release there lease handle 1. #
Slide there ar seat forw ards and backwards
until the car riage is cor rectly engaged on bo th
sides.
It should not be possible tomo vethe seat.
Fo lding there ar seat forw ards and back‐
wa rds &
WARNING Risk of becoming trapped
when adjusting the seats
When you adjust a seat, you may trap your‐
self or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. &
WARNING Risk of accident‑ and injury if
th e seat is not engaged
If a seat is not engaged, it may be thrown
about while theve hicle is moving. #
Always make sure that all seats are
engaged as desc ribed. In order
toensure that the seats can securely
engage, keep the seat guide rails and anchorages
in theve hicle floor free of dirt and fore ign
objects. &
WARNING Risk of becoming trapped if
th e seat is not engaged
The seat does not engage when folded for‐
wa rds. The seat can fold backwards unex‐
pectedl y,e.g. when accelerating, braking or in
th eev ent of an abrupt change of direction or
an accident.
Pe ople in the seat's sweep can become trap‐
ped. #
If a seat is folded forw ards, alw aysfo ld
it back before driving off. #
Make sure that the seat is engaged. *
NO
TEDama getothefo lding table or the
armrest when there ar seats are folded
fo rw ards or backwards If
th efo lding table is not positioned all the
wa y back when there ar seats are folded for‐
wa rds or backwards, thefo lding table and/or
th e armrest of there ar seat may be damaged. #
Slide thefo lding table all thewa y back
before folding there ar seats forw ards or
backwards. *
NO
TEDama getothe cup holder from the
re ar seat Fo
lding there ar seat in theth ird row of seats
fo rw ards can damage the cup holder. #
Remo vethe cup holder before folding
th e seat. Fo
lding the seat backrest forw ards (table
position) #
Fold up the armrests (/ page74). #
Pull there lease handle for seat backrest 1
up and fold the seat backrest forw ards. Seats and
stowage 83
Fo
lding there ar seat forw ards %
Pictogram
4onthe seat reminds you not to
tr ave l sitting behind a seat that has been fol‐
ded forw ards. #
Slide thefo lding tableto its rearmost position
(/ page 98). #
Remo vethe head restra int (/ page 92). #
Foldthe seat backrest forw ards into theta ble
position. #
Pull release handle 3upwards. #
Grasp the seat bygrab handle 2and fold
th e seat forw ards. #
Tofold back there ar seat: using grab han‐
dle 2, pull the seat backwards forc efully.
The rear seat anchorages will engage.
The rear seat legs of there ar ben chseat are cor‐
re ctly engaged when the seat legs engage audibly
and indicator tabs 5 onthe seat legs are no lon‐
ge r visible and ha vefully retracted into the seat
legs.
Installing and removing the rear seat &
WARNING Risk of accident and inju ryas
a re sult of rear ben chseat not being
engaged
If th ere ar ben chseat is not engaged, it may
be flung around during tra vel. #
Always make sure that there ar ben ch
seat is engaged as described. In order
toensure that there ar ben chseat can
securely engage, keep the seat guide rails and
anchora ges in theve hicle floor free of dirt and
fo re ign objects.
If th e indicator tab of the seat anchorage is not
re tracted into the seat leg, the seat is not cor‐
re ctly engaged. Engage the seat again. &
WARNING Risk of injury ‑ orfatal injury
when the last rowof seats is rotated
18 0 °
The vehicle occupants in there ar seats can
be injured byunsecured loads.
This poses an inc reased risk of injury or even
fa ta l injur y. #
If loads are being transpor ted, ne ver
ins tallth ere ar seats in the last row of
seats rotatedby 180 °. #
Alwaysst ore and secure objects and
loads properly in theve hicle. &
WARNING Risk of becoming trapped
when adjusting the seats
When you adjust a seat, you may trap your‐
self or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. Re
moving
When ins talling and removing there ar seats with
seat heating and seat ventilation or the luxury
re ar seats, no tethero uting of the cables and
th eir original ins tallation positions. Otherwise,
yo u may damage the cables and the on-board
computer may de tect the seat position incor‐
re ctly.
Use only rear seats with seat heating and seat
ve ntilation or luxury rear seats that we resupplied
with theve hicle. Due tothe high-quality design
and thete ch nical equipment, Mercedes-Benz rec‐
ommends that you ha veluxury rear seats ins tal‐
led at a qualified specialist workshop. Re
ar seat folded forw ard (e xample:standard rear
seat) 84
Seats and stowage
#
Make sure that all sliders forfo re -and-aft
adjustment are engaged on bo thsides.
It should not be possible tomo vethere ar
seat. #
Foldthe seat forw ards (/ page 83).
% Fo
r luxu ryrear seats, the electrical connector
must also be disconnected. #
Remo vecover4 ofthefloor soc ket. #
Remo vethe dummy cap from the brac ket on
th e seat. #
Press in the sides of electrical connector 5
in soc ket6 and remo ve. #
Insert the dummy cap into soc ket6 and
close thefloor soc ket wi thcover4. #
Secure electrical connector 5onto brac ket
7 onthe seat. #
Grasp the seat bygrab handle 1and fold
two release handles 2upwards. #
Movethefo lded seat towa rdsth e front and
lift it out. Fi
tting #
Hold the seat bygrab handle 1. #
From abo ve, guide the seat in a tilted position
into front seat anchorages 3and allow it to
engage.
% Fo
r luxu ryrear seats, the electrical connector
must also be connected. #
Remo vecover4 ofthefloor soc ket and
re mo vethe dummy cap from soc ket6. #
Remo veelectrical connector 5forth e seat
ve ntilation and seat heating from brac ket7
and insert into soc ket6. #
Attach the dummy cap tobrac ket7 onthe
seat. #
Close thefloor soc ket wi thcover4. #
Foldthe seat back totheta ble or seat posi‐
tion (/ page 83) and slide into the basic set‐
ting (/ page 82).
Using the EAS Y-ENT RYeasy entry and exit
fe ature (luxury rear seat) &
WARNING Risk of accident‑ and injury if
th e seat is not engaged
If a seat is not engaged, it may be thrown
about while theve hicle is moving. #
Always make sure that all seats are
engaged as desc ribed. In order
toensure that the seats can securely
engage, keep the seat guide rails and anchorages
in theve hicle floor free of dirt and fore ign
objects. &
WARNING Risk of becoming trapped
when adjusting the seats
When you adjust a seat, you may trap your‐
self or a vehicle occupant. #
When adjusting a seat, make sure that
no one has any body parts in the sweep
of the seat. &
WARNING Risk of becoming trapped if
th e seat is not engaged
The seat does not engage when folded for‐
wa rds. The seat can fold backwards unex‐
pectedl y,e.g. when accelerating, braking or in
th eev ent of an abrupt change of direction or
an accident. Seats and
stowage 85
#
Always make sure that there ar ben ch
seat is engaged as described. In order
toensure that there ar ben chseat can
securely engage, keep the seat guide rails and
anchora ges in theve hicle floor free from dirt and
fo re ign objects.
If th e indicator tab of the seat anchorage is not
re tracted into the seat anchorage, the seat is not
cor rectly engaged. Engage the seat again.
Re moving the seat/bunk combination
A seat/bunk combination may not be fitted in the
fa ce-to-face position. %
In
vehicles with a seat rail sy stem, car ryout
th ere lease, remo val and subsequent reins tal‐
lation of a rear ben chseat at the mar ked at
th e mar ked basic setting. #
If necessar y,remo vethe bed extension
(/ page 90). #
Remo vethestow age compartments
(/ page 98). #
Foldthere lease handle forth ere ar seat
anchorage 1up. #
Tilt th e seat/bunk combination forw ard using
th e upper edge of the seat backrest. #
Pull there lease handle for front seat ancho‐
ra ge s2 up. #
Hold the seat/bunk combination bythe lo wer
edge of the seat cushion. #
Foldthe seat/bunk combination forw ards
and lift it out of seat anchorages 3.Installing
the seat/bunk combination #
Hold the seat/bunk combination bythe lo wer
edge of the seat cushion. #
Place the seat/bunk combination into the
front seat anchorages 3from abo veatthe
front and allow toengage. #
Make sure that release handles for front seat
legs 2are folded underneath in the direc‐
tion of thefloor of theve hicle. #
Foldthe seat/bunk combination back into
th e seat position. #
Press there lease handle forth ere ar seat
anchorage 1down wards until the indicator
ta bs 4 have fully retracted into there ar seat
anchorages.
The rear seat anchorages of the seat/bunk com‐
bination are cor rectly engaged when the seat
anchorages engage audibly and the indicator tabs
4 onthe seat anchorages are no longer visible
and ha vefully retracted into the seat anchorages. Head
restra ints Ad
justing the head restra int mechanically &
WARNING Risk of injury ifve hicle set‐
tings are adjus ted while theve hicle is in
motion
Yo u could lose control of theve hicle in partic‐
ular in thefo llowing situations:
R Ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion.
R Ifyo ufast enyour seat belt while theve hi‐
cle is in motion. #
Before starting the engine: adjust the
driver's seat, head restra ints, steering
wheel and mir ror in particular and fas‐
te nyo ur seat belt. 92
Seats and stowage
The
following can be found in thestow age com‐
partment of the cent reconsole depending on the
car's equipment:
R A12 V soc ket (/ page 102) or the cigar ette
lighter (/ page102)
R The Media In terface with two USB ports or
with two USB ports and one SD card slot
R The holder forth e mobile phone cradle
R The ashtray (/ page101)
R Astow age compartment or a device ins talla‐
tion frame for auxiliary equipment, e.g. a
ta ch ograph
Opening and closing thest ow age comp art‐
ment under the armrest #
Toopen: press button 1.
The stow age compartment opens. #
Toclose: presstoclose the caps of thestow‐
age compartment in any order.
Opening and closing thegl ove compa rtment &
WARNING Risk of injury duetoobjects
being stowed incor rectly
If objects in theve hicle interior are stowed
incor rectly, they can slide or be thrown
around and hit vehicle occupants. In addition,
cup holders, open stowage spaces and
mobile phone brac kets cannot al waysretain
all objects they contain.
The reis a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Alwaysstow objects in such a wayth at
th ey cannot be thro wn around in such
situations. #
Always make sure that objects do not
pr otru de from stowage spaces, luggage
nets or stowage nets. #
Close the loc kable stow age spaces
before starting a journe y. #
Alwaysstow and secure heavy, hard,
poin ted, sharp-edged, fragile or bulky
objects in the boot. Comply with
the instructions for loading theve hi‐
cle. 0047
Unloc ked
0048 Locked
3 Glovecompa rtment handle #
Tolock/unlock: turnthe emer gency key a
qu arter turn anti-clockwise 0048(to lock) or
clockwise 0047(to unlock). #
Toopen: pullglov e compartment handle 3
in the direction of the ar row. #
Toclose: fold theglove compa rtment handle
up and press it until it engages.
Using thesto wage net on the seat backrest #
Store lightweight small parts in thestow age
nets.
% On front seats with seat
ventilation, make
su re that no objects pr otru de out of thestow‐
age net and co verth e seat ventilation air inl et
abo ve.
Opening thegl asses comp artment Seats and
stowage 97
#
Press the1 button.
Installing and removing stowage compa rt‐
ments unde rneath the seat/bunk combina‐
tion
Re moving %
The maximum load
that can be placed in
each stowage compartment is 13kg. #
Slide seat/bunk combination 1asfar back
as possible (/ page 90). #
Pull stow age compartment 2out as far as it
will go. #
Pull left-hand plast ictongue 3down and
ri ght-hand plastic tongue 3up, when vie wed
in the direction of tr avel. Pull out stowage
compartment 2a little each time.
The cor responding stop will be released. #
Pull out stowage compartment 2.
Fi tting #
Slide seat/bunk combination 1asfar back
as possible (/ page 90). #
Slide stowage compartment 2into guide
ra ils 4 underneath the seat/bunk combina‐
tion.
Plastic tongues 3will engage au tomatical ly. Fo
lding table Installing and
removing the folding table &
WARNING Risk of injury from unsecured
items in theve hicle
If objects, luggage or loads are not secured or
not secured suf ficiently, they could slip, tip ove
r or be throw n around and thereby hit
ve hicle occupants.
There is a risk of injur y,particular lyin the
eve nt of sudden braking or a sudden change
in direction. #
Alwaysstow objects in such a wayth at
th ey cannot be thro wn around. #
Before the journe y,secure objects, lug‐
ga ge or loads against slipping or tipping
ove r. &
WARNING Risk of accident‑ and injury
due tothefo lding table not being
engaged
The folding table can come loose and be flung
around while theve hicle is in motion. #
Installth efo lding table as described. #
Only mo vethefo lding table when the
ve hicle is stationar y. #
Ensu rethat thefo lding table is cor rectly
engaged. *
NO
TEDama getothefo lding table or the
armrest when there ar seats are folded
fo rw ards or backwards If
th efo lding table is not positioned all the
wa y back when there ar seats are folded for‐
wa rds or backwards, thefo lding table and/or
th e armrest of there ar seat may be damaged. #
Slide thefo lding table all thewa y back
before folding there ar seats forw ards or
backwards. Installing
thefo lding table 98
Seats and stowage
#
Obser vethe no tes on loading (/ page212). #
Push there ar seats back fully or, if necessar y,
re mo vethem. #
Lift off bo thcovers 1 from the guide rail
using a suitable tool, e.g. a scr ewdriver. #
Press bo thcovers 1 toge ther slightly and
re mo vethem from the guide rail.
The openings in thera ilfo rth e middle slide
on the underside of thefo lding table will be
open. #
Rotate thefo lding table until the ar row onthe
unde rside of thefo lding table is pointing in
th e direction of tr avel. Ins
tallation position #
Insert thefo lding table into guide rails 2 so
th at ar rows3 onthefo lding table point to
bo th markings 4on guide rail2.
The guides and sliding rail on the underside of
th efo lding tablefit into the guide rail. #
Pull le ver5 onthe front or rear side of the
fo lding table upwards and push thefo lding
ta ble backwards.
Press bo thcovers 1 toget her slightly and
engage them in the openings of the guide rails.
Moving thefo lding table #
Keep le ver5 pulled and mo vethefo lding
ta ble into the desired position. #
Release le ver5. #
Movethefo lding table until it automatically
engages in the next possible position. #
Afterre positioning theta ble, ensure that the
fo lding table is proper lysecured again.
Re moving the folding table #
Fold in theta ble panels and retract theta ble. #
Push there ar seats back fully or, if necessar y,
re mo vethem. #
Push thefo lding table back far enough so that
co vers 1 ofthe openings in thera il can be
re mo ved. #
Lift off bo thcovers 1 from the guide rail
using a suitable tool, e.g. a scr ewdriver. #
Press bo thcovers 1 toge ther slightly and
re mo vethem from guide rail2.
The openings in thera ilfo rth e middle slide
on the underside of thefo lding table will be
open. #
Push thefo lding tableforw ards into the
ins tallation position.
Ar row s3 onthefo lding table point toboth
markings 4on guide rail2. #
Lift thefo lding table out of guide rail2. Seats and
stowage 99