2021 KIA STINGER Owners Manual

Specifications, Consumer information, Reporting safety defects
4 8
TIRES AND WHEELS
*1: Load Index
*2: Speed Symbol
*3: Normal load : Up to 3 persons
*4: It is applied to Lambda II PE 3.3L T-GDI AWD vehicle.
ItemTire sizeWheel size
Load
CapacitySpeed
capacityInflation pressure [bar (psi, kPa)]Wheel lug
nut torque
kgf·m
(lbf·ft,
N·m)
Normal load *3Maximum load or Over
100 mph (160 km/h)
LI *1lbs
(kg)SS *2mph
(km/h)FrontRearFrontRear
Full size tire
225/45R188.0J X 18951,521
(690)V149
(240)2.5
(36, 250)2.7
(39, 270)2.6
(38, 260)2.7
(39, 270)
11~13
(79 ~ 94,
107 ~ 127
225/40R198.0J X 19931,433
(650)W167
(270)
2.5
(36, 250)-2.6
(38, 260)-
2.6 *4
(38, 260)-2.6
(38, 260)-
255/35R198.5J X 19961,565
(710)W167
(270)-2.5
(36, 250)-2.7
(39, 270)
225/40ZR198.0J X 19931,433
(650)Y186
(300)
2.5
(36, 250)-2.6
(38, 260)-
2.6 *4
(38, 260)-2.6
(38, 260)-
255/35ZR198.5J X 19961,565
(710)Y186
(300)-2.5
(36, 250)-2.7
(39, 270)
Compact
spare tire
(if equipped)T135/80R184.0T X 181041,984
(900)M80
(130)4.2
(60, 420)4.2
(60, 420)4.2
(60, 420)4.2
(60, 420)

85
Specifications, Consumer information, Reporting safety defects
CAUTION
When replacing tires, use the same size originally supplied with the vehicle.
Using tires of a different size can damage the related parts or make them work irregularly.
✽ ✽
NOTICE
• It is permissible to add 3 psi (21 kPa) to the standard tire pressure specification if colder temperatures are expect-
ed soon.
Tires typically loose 1 psi (7 kPa) for every 12°F (-11°C) temperature drop. If extreme temperature variations are
expected, re-check your tire pressure as necessary to keep them properly inflated.
• We recommend that when replacing tires, use the same originally supplied with the vehicles. If not, that affects
driving performance.
• When driving in high altitude grades, it is natural for the atmospheric pressure to decrease. Therefore, please
check the tire pressure and add more air when necessary.
Additionally required tire air pressure per km above sea level: 1.5 psi (10.5 kPa)/km
• Speeds above 100 mph (160 km/h)
In order to drive at maximum speeds in excess of 100 mph (160 km/h), please observe, and, if necessary, adjust
tire pressures for speeds exceeding 100 mph (160 km/h) from the above table. Otherwise tire damage and acci-
dents could occur.

Specifications, Consumer information, Reporting safety defects
6 8
GROSS VEHICLE WEIGHT
AIR CONDITIONING SYSTEM LUGGAGE VOLUME
We recommend that you contact an authorized Kia dealer for more details.
ITEMVolume
SAE23.31 cu ft (660 L)
ITEMlbs (kg)
Theta II 2.0L T-GDI2WD4,773 (2,165)
AWD4,927 (2,235)
Lambda II PE 3.3L T-GDI2WD5,004 (2,270)
AWD5,148 (2,335)
ITEMWeight of volumeClassification
RefrigerantR-1234yf
oz. (g) 20.1 ± 0.9
(570 ± 25g)R-1234yf
Compressor lubricant
oz. (g) 3.5 ± 0.4
(100 ± 10g)FD46XG (IDEMITSU)

87
Specifications, Consumer information, Reporting safety defects
RECOMMENDED LUBRICANTS AND CAPACITIES
To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant VolumeClassification
Engine oil *1*2
(drain and refill)
Recommends
Gasoline Engine
Lambda II PE 3.3L T-GDI7.29 US qt. (6.9 l)ACEA A5/B5 *3
Theta II 2.0L T-GDI6.02 US qt. (5.7 l)API Latest (ILSAC Latest)
or ACEA C2
Automatic transmis-
sion fluidGasoline
Engine Theta II 2.0L T-GDI
9.71 US qt. (9.2 l)GS ATF SP-IV-RR
KIA genuine ATF SP-IV-RR
Lambda II PE 3.3L T-GDI
CoolantGasoline
EngineTheta II 2.0L T-GDI9.29 US qt. (8.8 l)Mixture of antifreeze and distilled
water
(Ethylene glycol base coolant
for aluminum radiator)
Lambda II PE 3.3L T-GDI12.25 US qt. (11.6 l)
Brake fluid0.42 US qt. (0.395 l)FMVSS116 DOT 3 or DOT 4

Specifications, Consumer information, Reporting safety defects
8 8
Lubricant VolumeClassification
Rear differential oil (without LSD)
(Theta II 2.0L T-GDI) *41.27 US qt. (1.2 l)HYPOID GEAR OIL API GL-5 SAE 75W/85
(SK HK SYN GEAR OIL 75W85)
Rear differential oil (without LSD)
(Lambda II PE 3.3L T-GDI) *41.37 US qt. (1.3 l)
Rear differential oil (with LSD)
(Theta II 2.0L T-GDI) *4*51.37 US qt. (1.3 l)HYPOID GEAR OIL API GL-5 SAE 75W/85
(SK HK JL SYN LSD GEAR OIL 75W85 PLUS)
Rear differential oil (with LSD)
(Lambda II PE 3.3L T-GDI) *4*51.48 US qt. (1.4 l)
Front differential oil (AWD) *40.74 US qt. (0.7 l)HYPOID GEAR OIL API GL-5 SAE 75W/85
(SK HK SYN GEAR OIL 75W85)
Transfer oil
(AWD)Gear/ Clutch0.60 US qt. (0.57 l)
SHELL TF 0870B
Actuator0.26 US qt. (0.25 l)
FuelGasoline Engine63.36 US qt. (60 l)Refer to Fuel requirements in chapter 1
*1: Refer to the recommended SAE viscosity numbers on the next page.
*2: Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing
the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s
time, they can offer significant cost and energy savings.
*
3: If the ACEA A5/B5 engine oil is not available in your country, you are able to use API Latest, ILSAC Latest.
*4: Regardless of oil change intervals, replace oil immediately if Rear-Differential or Front-Differential is submerged.
*5: Be sure to inject oil for exclusive use of LSD when replacing Rear Differential (for LSD) Oil.

89
Specifications, Consumer information, Reporting safety defects
Recommended SAE viscosity
number
Engine oil viscosity (thickness) has an
effect on fuel economy and cold
weather operating (engine start and
engine oil flowability). Lower viscosity
engine oils can provide better fuel
economy and cold weather perform-
ance; however, higher viscosity
engine oils are required for satisfacto-
ry lubrication in hot weather. Using
oils of any viscosity other than those
recommended could result in engine
damage. When choosing an oil, con-
sider the range of temperature your
vehicle will be operated in before the
next oil change. Proceed to select the
recommended oil viscosity from the
chart.
An engine oil displaying this API Certification Mark con-
forms to the international Lubricant Specification Advisory
Committee (ILSAC). It is recommended to only use engine
oils that uphold this API Certification Mark.
Temperature Range for SAE Viscosity Numbers
Temperature°C
(°F)-30 -20 -10 0 10 20 30 40 50
-10 0 20 40 60 80 100 120
Gasoline
Engine Oil
10W-30
5W-30
Lambda II
PE 3.3L
T-GDI *
1
Theta II
2.0L
T-GDI *
2
20W-50
10W-30
15W-40
0/5W-30, 5W-40
*1: For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W
30 (ACEA A5/B5). However, if the engine oil is not available in your country, select the proper
engine oil using the engine oil viscosity chart.
*
2 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 0W
30 (API Latest (ILSAC Latest) or ACEA C2). However, if the engine oil is not available in your
country, select the proper engine oil using the engine oil viscosity chart.

Specifications, Consumer information, Reporting safety defects
10 8
VEHICLE IDENTIFICATION NUMBER (VIN)
The vehicle identification number
(VIN) is the number used in register-
ing your vehicle and in all legal mat-
ters pertaining to its ownership, etc.
The number is punched under driver
or front passenger seat.
To check the number, open the
cover.The VIN is also on a plate attached
to the top of the dashboard. The
number on the plate can easily be
seen through the windshield from
outside.The vehicle certification label
attached on the driver’s side center
pillar gives the vehicle identification
number (VIN).
VEHICLE CERTIFICATION
LABEL
OCK087001
■Frame number
OUM084005
■VIN label
OCK087005

811
Specifications, Consumer information, Reporting safety defects
The tires supplied on your new vehi-
cle are chosen to provide the best
performance for normal driving.
The tire label located on the driver's
side center pillar gives the tire pres-
sures recommended for your vehicle.
The engine number is stamped on
the engine block as shown in the
drawing.The refrigerant label is located on
the underside of the hood.
❈For more details, refer to “Air
Conditioning refrigerant label” in
chapter 4.
ENGINE NUMBER TIRE SPECIFICATION AND
PRESSURE LABEL
OMG055004
OCK089002
OCK089003
■Lambda II PE 3.3L T-GDI (Gasoline engine)
■THETA II 2.0L T-GDI (Gasoline engine)
REFRIGERANT LABEL
OCK087007L