2021 KIA SELTOS navigation update

10
Configuring the voice recognition settings 9-27
Guidance 9-27
Configuring the navigation settings 9-28
Display 9-28
Guidance 9-30
Alerts 9-31
Others 9-32
Configuring the UVO settings 9-33
Activate UVO 9-33
911 Connect 9-34
Modem Information 9-35
Modem Status 9-35
Configuring the user profile settings 9-35
Profile Settings 9-36
Configuring the general system settings 9-37
SW Info/Update 9-37
System Info 9-38
My Data 9-39
Date/Time 9-39
Language 9-40
Keyboard 9-40
Units 9-41
Configuring the device connection settings 9-14
Bluetooth 9-15
Android Auto 9-16
Apple CarPlay 9-16
Configuring the advanced system settings 9-17
Return to Map: Set Time 9-17
TUNE Knob Function 9-18
Custom Button ☆ 9-18
Steering Wheel MODE Button 9-19
Home Screen 9-19
Split Screen 9-20
My Data 9-20
Extend Rear Camera Use 9-21
Configuring the button settings 9-21
TUNE Knob Function 9-22
Custom Button ☆ 9-22
Steering Wheel MODE Button 9-23
Configuring the sound settings 9-23
Premium Sound 9-24
Sound Tuning 9-24
Driving Guidance 9-25
System Volumes 9-25
FM Radio Noise Control 9-26
Reset 9-27
Turning on/off the screen touch sound 9-27

1-2
NAV button Moves to the navigation/route screen.
When you press and hold the
button, the Places screen appears.
> See “
Searching by keyword.”
RADIO button  Turns on the radio.
When you press the button
repeatedly with the radio turned
on, it toggles between FM, AM and
SiriusXM modes.
MEDIA button
 Run the media.
Press and hold to display the media
selection window.
SEEK/TRACK
button
 While listening to the radio, change
the station.
While playing media, change the
track/file. Press and hold to rewind or
fast forward (except for the Bluetooth
audio mode).
Custom button
(
)
 Runs the user-defined function.
Press and hold the button to display
the Custom Button settings screen.
SETUP button
 Displays the Settings screen.
When you press and hold the button
the SW Info/Update screen appears.
> See “
SW Info/Update.”
Component names and
functions
The following describes the part names and controls on the
control panel and steering wheel.
Control panel
A
A
The shape may differ depending on the vehicle model and
specifications. For more information, see “Quick Reference
Guide” that is separately provided.
POWER button
(POWER/PWR)/
VOLUME knob
(VOLUME/VOL) Press the button to turn on or off the
Radio/Media.
Press and hold the button to turn off
the screen and sound.
Turn the knob to adjust the system
volume (except for navigation sound).
MAP button
 Returns to the current location on the
map.
When pressed while in guidance on
the map screen, the voice guidance is
repeated.

2-21
Seeing notifications (if equipped)
You can view UVO notifications including the navigation and map
update information.A
A
Subscribe to UVO to check the function.
> See “Subscribing to
the service.”
1 On the All Menus screen, press Notifications.
2 Select to view the item.
ca
b
a Returns to the previous step.
b View the list of received notifications. Select from the list
to view details.
A
A
Important notifications are marked with
next to
the title.
A
A
You cannot display notification details while driving.
Stop the vehicle first to view notifications.
Seeing the driving information
(if equipped)
You can analyze the driving patterns by checking the driving
information such as driving time, distance, idle time, and vehicle
speed distribution. Use this information to ensure safe and
economical driving.
A
A
This function is available only when your vehicle is stationary
with the vehicle started.
1 On the All Menus screen, press Driving Info.
2 Check the driving information of your vehicle.
A
A
To see the latest information, press .
AATo access the online user’s manual on the driving information
screen, press Menu >
User's Manual on Web (QR Code) and
then scan the displayed QR code.

5-5
A
A
Navigation service may not be provided correctly under the
following conditions:

When the vehicle drives on a straight road continuously,
the system may guide you to drive straight. It is not a
malfunction.

Guidance may not be followed immediately after the
vehicle makes a turn at an intersection or drives through an
intersection.

The system may guide you to make a U-turn in a prohibited
area.

The system may guide you to a traffic-blocked road (e.g. no-
entry road or road under construction).

The system may guide you to a road away from the
destination when there is no road to the destination or
there are only narrow roads on the way.

Guidance may not be proper when the vehicle is off the
route.

Guidance may not match the actual distance on an
overpass or underpass due to the difference of the start
point.

When you are driving at high speeds, route recalculations
may take longer.
A
A
Because the navigation system is used for information
purposes only, Kia does not assume responsibility of the
accuracy of the information.
A
A
When the traffic information is not received, the status icon
appears at the top of the map screen.

HD Radio: The system is using the HD radio data. If no
traffic information is available, the status icon (
)
will be
displayed instead.

The vehicle is driving in a rugged mountain area or on a
steep curve road.

The vehicle is entering a public road after making a turn
through the turntable in an underground parking lot or
multi-story parking lot.

The vehicle stops and starts repeatedly or moves slowly in
front of an intersection.

The system reboots after the vehicle battery has been
recharged or replaced.

The vehicle is driving on a slippery road due to heavy snow,
etc.

The tires have been replaced recently or spare tires (or
studless tires) are used.

Improper-sized tires are used or the pressure of each tire is
different.

The replaced tire is worn out or the studless tires have been
used for over two seasons.

A roof carrier is installed on the vehicle.

On a highway. continued driving causes the system to
perform map matching or apply the updated GPS data.

5-16
2 On the map for a search, press Add Waypoint.
The selected waypoint is immediately added to the route.
3 After adding waypoints, press Reroute.
A
A
To access the online user’s manual on the Edit Route
screen, press Menu >
User's Manual on Web (QR Code)
and then scan the displayed QR code.
4 Select the updated route and then press Start
Guidance.
Editing the route
You can edit the current route so that you can travel via waypoints
on the way to the destination. You can add up to two waypoints.
Setting a waypoint
You can search for the desired place and set it as a waypoint.
1 On the Navigation Menu screen, press the
desired search method to search for a waypoint.
A
A
Available icons and their arrangement may differ
depending on the vehicle model and specifications.
A
A
For more information about the waypoint search:
> see “Searching by keyword,” “Searching by previous
destinations,” “Searching the nearby points of interest,”
“ Searching for restaurants (if equipped),” “Searching for
emergency services (if equipped).”

5-17
Deleting a waypoint
You can delete a waypoint from the route.
1 On the Navigation Menu screen, press Edit
Route.
2 Select a waypoint to delete from the route and
then press
.
3 To search the route again after removing the
waypoint, press Reroute.
4 Select the updated route and then press Start
Guidance.
Changing the order of waypoints
You can change the order of waypoints on the route.
1 On the Navigation Menu screen, press Edit
Route.
2 To change the order of waypoints, select a
waypoint and then press
or .
A
A
To add another waypoint on the Edit Route screen, press
Add waypoint.
A
A
To see on the map, press
next to the name.
3 After editing the route, press Reroute.
4 Select the updated route and then press Start
Guidance.

5-18
3 Select the roads to avoid and press Avoid the
Selected Road.
4 Select the updated route and then press Start
Guidance.
A
A
When there is any zone under construction ahead on the way,
you are prompted to confirm whether or not to exclude the
zone from the route. To avoid the zone, press Yes to resume
routing.
Avoiding specific zones (if equipped)
You can resume routing after excluding the specified roads such
as congested roads or roads under construction.
1 On the Navigation Menu screen, press Route
Overview.
2 Press Route Info. / Avoid.
AA The screen may differ depending on the vehicle model
and specifications.

5-20
Searching for restaurants (if equipped)
1 On the Navigation Menu screen, press
Restaurants.
AAAvailable icons and their arrangement may differ
depending on the vehicle model and specifications.
2 Select a destination from the search result.
A
A
To sort the search results in a different order, press on the
attribute to toggle between options.
A
A
To access the online user’s manual on the Restaurants
screen, press Menu >
User's Manual on Web (QR Code)
and then scan the displayed QR code.
Avoiding specific zones (if equipped)
You can resume routing after excluding the specified roads such
as congested roads or roads under construction.
1 On the Navigation Menu screen, press Route
Info. / Avoid.
2 Select the roads to avoid and then press Avoid
the Selected Road.
A
A
To access the online user’s manual on the Route Info
screen, press Menu >
User's Manual on Web (QR Code)
and then scan the displayed QR code.
3 Select the updated route and then press Start
Guidance.
A
A
When there is any zone under construction ahead on the way,
you are prompted to confirm whether or not to exclude the
zone from the route. To avoid the zone, press Yes to resume
routing.