2021 KIA SELTOS set

2-7
Using the Apple CarPlay
1 On the All Menus screen, press Apple CarPlay.
2 Perform the desired function.
To run any of functions (phone, messaging, navigation,
etc.) on your iPhone, press the corresponding function
icon.
A
A
When you are using your smartphone′s navigation
via phone projection, sounds from both the system′s
radio/media function and the navigation will be output
through your vehicle′s speakers. When you turn the
Volume knob while both sounds are being output, the
navigation volume is adjusted first.
To run the Siri voice recognition, press and hold the Voice
Recognition button on the steering wheel.
A
A
To display the system Home screen, press
.
A
A
By pressing the [ MODE] button on the steering wheel, you
can run the media application on your smartphone as well as
the Radio/Media mode of the system.
A
A
To specify which functions to run when the [ MODE] button
on the steering wheel is pressed, press and hold the [ MODE]
button to display the settings screen.
A
A
When you receive a call, press the Call button on the steering
wheel to answer it.
A
A
When phone projection is active, you cannot change the
phone projection settings. To change the settings, remove the
USB cable from your system.
3 Connect an iPhone to the USB port on the vehicle
by using the provided USB cable.
A
A
When the connection is made for the first time, the system
screen displays a notification window. Check the details
and then press OK.
A
A
To end the Apple CarPlay and disconnect from the iPhone,
remove the USB cable from the system.
ÜCaution
Do not repeatedly connect and remove the USB connector
within a short time. It may cause device errors or system
failures.
4 When the iPhone is locked, unlock it first and then
consent to the use of Apple CarPlay.
When the iPhone is recognized successfully, the Apple
CarPlay menu is activated on the All Menus screen.

2-8
Using the driving assist display
You can see the view around the vehicle through the system
screen.A
A
The displayed screen may differ depending on the vehicle
model.
ÝWarning
When backing up, make sure to follow the guidelines below:
Before entering your vehicle, always check the area behind
your vehicle.
Do not solely rely on the rear view camera when backing up.
Always ensure that it is safe to back up by checking behind
you and looking in the rearview mirrors.
Always back up slowly and stop immediately if you suspect
that a person, especially a child, might be behind you.
ÜCaution
Objects on the screen may not be as close or far as they appear.
Be sure to check the rear, left, and right sides with your own eyes
for safety.
A
A
Applications or functions used through Apple CarPlay
are subject to change according to the policy of Apple
Corporation. For supportable functions, visit the Apple
Corporation website at http://www.apple.com/ios/carplay .
A
A
To use the functions on your smartphone with the minimized
system settings, update the smartphone OS to the latest
version.
A
A
The recognition time may differ depending on the device
type, firmware, and OS version.
A
A
Charges may apply for any mobile data used while Apple
CarPlay is running.
A
A
Some functions may not work properly depending on the
network signal strength.
A
A
Avoid interacting with the smartphone while using Apple
CarPlay.
A
A
You cannot use the following functions when Apple CarPlay is
in use.

Bluetooth

USB mode

Android Auto

Browse function using the [TUNE/
FILE] knob

2-10
Viewing the rear top view display (if equipped)
You can look down the rear view from the top through the rear-
view display.
1 On the rear-view screen, press .
2 Check the top view display and assist guide lines.
A
A
The guide lines appear on the rear top view.

Displays the space required to open the trunk. After a
parking, check whether the space is sufficient to open
the trunk and there is no obstacle.

Displays the extension line from the center of the
vehicle. According to the steering direction, the moving
direction of the center is displayed on the screen.
A
A
Available settings may differ depending on the vehicle model
and specifications.
A
A
You can change the motion settings of the rear camera. On
the All Menus screen, press Setup >
Display >
Extend Rear
Camera Use and then check Extend Rear Camera Use to
turn on the function. The rear view appears continuously even
when you change the shift position other than “R” (Reverse)
after reversing (if equipped).
A
A
Noting the parking assist guide lines based on the steering,
you can see the moving direction.
AAA warning sound is heard when the vehicle approaches
obstacles while parking. When you set to automatically lower
the audio volume while parking, it can prevent accidents
caused by failure to hear the warning sound. On the All
Menus screen, press Setup >
Sound >
Driving Guidance >

Parking Safety Priority.
> See “Parking Safety Priority.”

2-11
2 Press the icon to get a view in the desired
direction.
IconDescription
Displays the zoom-in front top view and top view.
Displays the front wide view and top view (default).
Display the front blind spot view and top view.
Used to adjust the brightness and contrast of the
camera images.
Displays the surround view settings.
A
A
When any door or trunk is open or outside rear-view
mirrors are folded, an alert icon appears on the screen.
A
A
To turn off the surround view screen, press the [
]
button.
Surround View Monitor (if equipped)
You can check the surroundings by using multiple cameras on the
vehicle.
A
A
Use the +/- button on the right of the screen to zoom in or
out.
Viewing the surround view while driving
1 In order to see the surround view, press the []
button.
The system displays both the front view and surround view.
A
A
The surround view monitor function operates only when
any of the following conditions are met.

The driving speed is below 9mph with the shift position
in “D” (Drive).

The vehicle is stationary and the shift position is in “D”
(Drive) or “N” (Neutral).

2-12
Configuring the surround view monitor
settings
1 On the surround view screen, press .
2 Select and then change the settings.
To select the information to appear on the video, press
Display Contents. (e.g. Top view parking guidance, rear
view parking guidance, parking distance warning).
To select the default view for top view monitoring, press
Top View Default Mode.
To select the default view for using the surround view
monitor function while driving, press Front View Default
Mode.
Viewing the surround view while reversing
1 Press the “R” (Reverse) button shifter (or move the
shift lever to “R” in a previous vehicle model) with
the vehicle turned on.
The system displays the rear view of the vehicle.
A
A
The surround view monitor function is not available when
you change the shift position to “P” (Park).
2 Press the icon to get a view in the desired
direction.
Icon Description
Displays the zoom-in rear top view and top view.
Displays the rear wide view and top view (default).
Display the rear blind spot view and top view.
Used to adjust the brightness and contrast of the
camera images.
Displays the surround view settings.

2-13
g Can turn on or off the automatic temperature control
function.
h Can turn on or off the air conditioner.
i Can turn on or off the function that adjusts the temperatures
for the driver’s seat and passenger’s seat equally.
j The list of menu items appears.
User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
Split Screen: Can turn on or off the split screen mode.
When you manipulate the climate control system while using
the product, the climate settings appear on the upper part of the
screen.
icdefgh
AA The temperature of the climate system can be adjusted by
1 ℉ increments. When the temperature is set to the lower
limit or upper limit, “LOW” or “HIGH” appears on the screen.
A
A
In Auto mode, the mode turns off in the following situations:

The fan speed or air direction is changed.

The air conditioner is turned on or off.

The Auto Defog function is turned on to ensure driver’s
visibility.
A
A
Available settings may differ depending on the vehicle model
and specifications.
Using the climate control
system
(if equipped)
You can check and adjust the climate system settings on the
screen.
Press the [ CLIMATE] button on the climate control
system.
A
A
For more information about how to use the heater and air
conditioner, refer to Owner’s Manual of the vehicle.
cdef
b
ghi
ja
a Returns to the previous step.
b Displays the outside temperature.
c Can adjust the driver’s seat temperature.
d Can to adjust the passenger’s seat temperature.
e Can adjust the fan speed.
f Can adjust the air direction.

2-14
bcd
f
g
ha
For manual temperature control
a Returns to the previous step.
b Can set the inside temperature.
c Can adjust the air direction.
d Can adjust the fan speed.
e Can turn on or off the automatic temperature control
function of the rear seat.
f The climate for the rear seat is turned off.
g Can lock to prevent any occupant from controlling the
climate control system.
h The list of menu items appears.
User's Manual on Web (QR Code): Displays the QR
code that provides access to the online user manual
for the system.
Split Screen: Can turn on or off the split screen mode.
A
A
Available settings may differ depending on the vehicle
model and specifications.
Using the rear-seat climate
control system
(if equipped)
You can check or set the rear-seat climate status on the system
screen.
1 Perform any of the following methods:
Press the [
REAR] button on the climate control system.
On the All Menus screen, press Rear Climate Controls.
2 Select and then change the settings.
bcd
ef
g
ha
For automatic temperature control

2-16
Using the Quiet mode in the
rear seat
(if equipped)
To allow occupants in the rear seat to have rest and sleep, you
can set to adjust the system volume.
1 On the All Menus screen, press Quiet Mode.
2 Press Quiet Mode.
The audio volume in the rear seat is muted. When the volume
for the front seats is set too high, the volume decreases
automatically.
A
A
To end the Quiet mode, press Quiet Mode once more.
A
A
To access the online user’s manual on the Quiet mode screen,
press Menu >
User's Manual on Web (QR Code) and then
scan the displayed QR code.
Using the sound mood lamp
(if equipped)
You can set to implement various lighting effects by synchronizing
with the playing music.
1 On the All Menus screen, press Sound Mood
Lamp.
2 Select and then change the settings.
c
d
e
f
b
ag
a Returns to the previous step.
b Can turn on or off the sound mood lamp.
c Can select various color themes. Based on the selected
color theme, the interior lighting changes its colors in
various patterns.
d Can select the color of the light. The selected lighting color
changes into a soft glow effect.