2021 GENESIS G80 Premium Navigation Manual

241
Using Voice Recognition System
operaTing V oice command
condiTion for V oice command s YsTem
Most of the functions can be operated by voice.
Please follow the instructions below for optimal voice recognition performance.
䠐To improve the voice recognition performance, keep your car interior quiet by closing all
windows and the sunroof.
䠐Press the voice recognition button and say the desired voice command after the beep
sound.
䠐The microphone is positioned above the driver. Voice commands should be spoken by
driver practicing proper posture.
䠐Pronounce the voice commands naturally and clearly as if in a normal conversation.
䠐Special symbols of Phonebook Name are not considered in voice recognition.
Ex) James-Smith : “James Smith”
䠐House number or digits in Phonebook Name should be spoken discretely.
Ex) S1234 : “South one two three four”
䠐Depending on the specifications, some commands may not be supported.

242
Using Voice Recognition System
sTar Ting V oice recogniTion
1. Press the [i] button on the steering wheel remote control.
2. Say the desired voice command after the beep sound.
,noTe
䠐For proper recognition, please say the command after the voice instruction and beep
sound.
䠐When starting voice recognition, the voice command entry window with four
representative commands is displayed.
䠐If voice recognition is in [Beginner], then the system will provide the detailed voice
recognition guidance. If voice recognition is in [Standard], then the system will provide
the simple version of voice recognition guidance. If voice recognition is in [Expert], then
you will only hear a beep.
sKipping prompT messages
While a prompt is playing, press the [i] button on the steering wheel remote control quickly.
The prompt is immediately ended and a beep will sound.
After the beep, please say the voice command.
re-s Tar Ting V oice recogniTion
While the system waits for input, press the [i] button on the steering wheel remote control
quickly.
The beep tone will sound, indicating the system is listening for a new input.
Say a voice command.
ending Voice recogniTion
䠐While voice recognition is operating, press and hold the [i ] button on the steering wheel
remote control, or say "Exit".
䠐While using voice recognition, pressing other button except on the steering wheel remote
control or a different button on head unit will end voice recognition.
adjusTing V oice recogniTion V olume
While voice recognition is operating, turn [:/VOL] the wheel up/down on the front seat
control key or press [J/I] on the steering wheel remote control.

243
Using Voice Recognition System
basic opera Tion for Voice command ( seTTing fm)
1. Press the [i] button on the steering wheel remote control.
The system waits for your command and displays a list of available commands on the
screen.
2. If you hear a beep sound after voice guidance, say “Tune to FM”.

244
Using Voice Recognition System
abouT Voice command “help”
1. Press the [i] button on the steering wheel remote control.
2. If you hear a beep sound after voice guidance, say “Help”. The available commands are
displayed on the screen.
3. Select or say the displayed command on the screen.

245
Using Voice Recognition System
Voice command lisT
Voice recognition commands are classified as “Global Commands” and “Local Commands”.
䠐Global commands (●) : Commands that can be used immediately after activating voice
recognition.
䠐Local commands (□) : Commands that can be used in specific multimedia/navigation/
Bluetooth mode states.
,noTe
Some global and local commands will operate properly only when a USB, iPod, Bluetooth or
other device has been connected.
phone commands
䠐Voice commands related to phone calls can be used after connecting the Bluetooth phone
device.
䠐To call a person, you must first download the mobile phone contacts. (Up to 5,000 mobile
phone contacts can be downloaded.)
䠐After downloading the Bluetooth phone contacts, it will take some time to convert the
phone contacts into voice data during which time you cannot make a call by name yet. The
time that it taken to convert voice data may vary depending on the number of contacts
downloaded.
CommandOperation
●CallDownloaded mobile phone contacts is displayed on the screen, and afterwards, you can make a call by speaking the name.
●Call You can immediately make a call to (name) in the downloaded mobile phone contacts.
Ex) “Call John Smith”
●Call on MobileYou can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘mobile’.
Ex) “Call John Smith on mobile”
●Call at WorkYou can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘office’.
Ex) “Call John Smith at work”
●Call at HomeYou can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘home’.
Ex) “Call John Smith at home”
●Call on OtherYou can immediately make a call to (name) in the downloaded mobile phone contacts saved as another phone category except ‘mobile, home, office’.
Ex) “Call John Smith on other”

246
Using Voice Recognition System
●Dial numberDisplays a screen where you can say a phone number to dial.
●Dial You can make a call by directly speaking the number you want to call.
Ex) Dial 123-456-7890 : “Dial one two three four five six seven eight nine zero”
●Change Bluetooth deviceIt can disconnect from the Bluetooth device currently connected and connect to other Bluetooth devices already paired.
radio commands
CommandOperation
●FMIt runs FM radio.
●AMIt runs AM radio.
●SiriusXM™It runs SiriusXM™ radio.

247
Using Voice Recognition System
naViga Tion commands
Check the following before you use navigation commands :
1. Search for and find addresses located in the state or province your car is currently in.
If you want to search in another state, say the name of state/province and then say the
address. "Find Address" command is classified by states/provinces to provide you with
faster service.
2. Some commands such as “Cancel Route” are available only when the destination is fixed.
CommandOperation
●Find Address in
Finds the address in and sets it as the destination.
Ex) Find Address in California.
To find an address, you should say “House Number → Street → City” (in order, excluding the state).
Ex) 300 (Three Zero Zero), Main Street, Almond
●Find Immediately finds of POI nearest to your current location.
Ex) Find “Parking”
●Previous DestinationsDisplays a list of recent destinations and you can set a destination by saying the number on the list.
●Traffic InformationMoves to the Traffic Information menu screen.
●Go HomeSet your home as the destination. Your home address must be set up in the Navigation System.
●Change HomeChanges location for Home.
●Go to Work Set the destination to your office/place of work. Your office/place of work must be set up in the Navigation System.
●Change WorkChanges location for Work.
●Turn Guidance OnTurns on the voice guidance system.
●Turn Guidance OffTurns off the voice guidance system.
●Cancel RouteCancels the route to the fixed destination and exits guidance.
●Destination InformationTells you the remaining distance and time to your destination.
●Route OptionsMoves to the Route Options screen.
●Pause RoutePauses the route guidance.
●Resume RouteRestarts the route guidance.
●Frequently Visited PointsDisplays a list of frequently visiting points.
●Show RouteDisplays a map overview of the entire route to your destination.
●Address BookDisplays a list of the address book. You can set a destination by saying number on the list.

248
Using Voice Recognition System
oTher commands
CommandOperation
●HelpGoes to the voice recognition help screen. All available commands can then be identified and used.
□Yes/NoWhen voice recognition is active, this command is used when an answer is requested for a confirmation question.
□Line 1-4 (One-Four)When you cannot select a certain name, such as in Call History, you can select it using line number.
Simple numbers, such as “one” and “two”, can be recognized.
□Next/PreviousWhen five or more searched items are listed, you can move to the previous or next page using a voice command.
□Manual InputWhen Dial or Destination search results are displayed, this command is used to search manually rather than searching using a voice command.
Voice recognition stops after this command is used.
□Go BackGoes back to the previous screen.
●ExitEnds the voice recognition.