130
Removable snow shield 
Depending on country, the removable snow 
shield is installed on the lower part of the front 
bumper, to avoid the accumulation of snow at 
the radiator cooling fan.Do not forget to remove the removable 
snow shield when the exterior temperature 
is higher than 10°C (no risk of snowfall) or 
if you are towing.
Fitting
F Put the removable snow shield in front of its centring pin A on the front bumper.
F
 
F
 it it in place by pressing every clip B at the 
four corners.
Removal
F Place a screwdriver at the hole near each  clip.
F
 
M
 ake a lever movement to unclip the four 
clips B .
Changing a wiper blade
Putting the windscreen 
wiper blades in the special 
position
Changing a windscreen wiper blade
F Within one minute after switching off 
the ignition, move the wiper stalk down 
to position the wiper blades along the 
windscreen pillars (special position). 
Practical information