2020 MERCEDES-BENZ GLE Owners Manual

Set the desired color.%There are 64 colors available.
Adjustingthebrightness
Select Brightness .
Adjust the brightness.
Activatingthebrightnessforzones
Select Brightness .Select Brightness Zones .
The ACCENT and AMBIANCE zones can be
set separately.
Activatingmulti-colorlighting
Select Color.Select Multi-color .
There are ten preset color combinations
available.Select a color combination.
Activatingmulti-coloranimation
Select Color.Select Multi-color Animation .
The chosen color combination will change at
predefined intervals.
Activatingwelcomelighting
Select Color.Select Welcome .
When the vehicle is unlocked, a special ambi

Windshieldwiperandwindshieldwashersystem
Switchingthewindshieldwiperson/off
0047005A Windshield wipers off00480062 Automatic wiping, normal00490063 Automatic wiping, frequent004A00AA Continuous wiping, slow004B00A9 Continuous wiping, fastTurn the combination switch to the correct
position 0047 - 004B .Singlewipe/washing: push the button on
the combination switch in the direction of
arrow 1.
= 00D3 Single wipe
= 00D4 Wipes with washer fluid
VehicleswithMAGICVISIONCONTROL: in
position 0048 or 0049, the windshield washing proc

Toswitchintermittentwipingonoroff:press button 2.
Vehicleswithrainsensor: The wipe inter

InstallingthewiperbladesInsert the new wiper blade into the wiper
arm in the direction of arrow 1.Slide catch 2 in the direction of arrow 3
until it engages in the locking position.Make sure that the wiper blade is seated cor

RemovingthewiperbladesTobringthewiperbladeintopositionto
beremoved: hold the wiper arm firmly in
one hand. With the other hand, turn the
wiper blade in the direction of arrow 1
beyond the point of resistance.
The wiper blade will engage in the removal
position with a click.Toremovethewiperblade: press release
knob 2, pull the wiper blade in the direction
of arrow 3 and remove.
Installingthewiperblades
Push the new wiper blade onto the wiper arm
in the direction of arrow 1 until release
knob 2 engages.Press the wiper blade onto the wiper arm in
the direction of arrow 3 beyond the point of
resistance.
The wiper blade will engage with a noticeable
click and move freely again.Fold the wiper arm back onto the windshield.
Replacingtherearwindowwiperblade
&WARNING Risk of becoming trapped if
the windshield wipers are switched on
while wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
Always switch off the windshield wipers
and the ignition before changing the
wiper blades.
Removingthewiperblade
Switch the ignition off.Light and visibility147

Fold wiper arm 2 away from the rear win

&WARNING Risk of accident due to mis

Automaticanti-glaremirrorsfunction&WARNING Risk of acid burns and poi