2020 DODGE GRAND CARAVAN Owners Manual

MULTIMEDIA335
THE DATA SHALL NOT EXCEED $1.00. Some
States, Territories and Countries do not allow
certain liability exclusions or damages
limitations, so to that extent the above may not
apply to you.
Disclaimer of Endorsement . Reference to any
products, services, processes, hypertext links to
third parties or other Data by trade name,
trademark, manufacturer, supplier or otherwise
does not necessarily constitute or imply its
endorsement, sponsorship or recommendation
by Garmin® or its licensor. Product and service
information are the sole responsibility of each
individual vendor. The NAVTEQ name and logo,
the NAVTEQ and NAVTEQ ON BOARD
trademarks and logos, and other trademarks
and trade names owned by NAVTEQ North
America LLC may not be used in any
commercial manner without the prior written
consent of NAVTEQ.
Export Control . You agree not to export from
anywhere any part of the Data provided to you
or any direct product thereof except in
compliance with, and with all licenses and
approvals required under, applicable export
laws, rules and regulations. Indemnity
. You agree to indemnify, defend and
hold Garmin® and its licensors (including their
respective licensors, suppliers, assignees,
subsidiaries, affiliated companies, and the
respective officers, directors, employees,
shareholders, agents and representatives of
each of them) free and harmless from and
against any liability, loss, injury (including
injuries resulting in death), demand, action,
cost, expense, or claim of any kind or character,
including but not limited to attorney’s fees,
arising out of or in connection with any use or
possession by you of the Product (including the
Data).
Canadian Map Data . The Map Data for Canada
may include or reflect data of licensors,
including Her Majesty and Canada Post. Such
data is licensed on an “as is” basis. The
licensors, including Her Majesty and Canada
Post, make no guarantees, representations or
warranties respecting such data, either express
or implied, arising by law or otherwise, including
but not limited to, effectiveness, completeness,
accuracy or fitness for a particular purpose. The
licensors, including Her Majesty and Canada
Post, shall not be liable in respect of any claim,
demand or action, irrespective of the nature of
the cause of the claim, demand or action alleging any loss, injury or damages, direct or
indirect, which may result from the use or
possession of the data or the Map Data. The
licensors, including Her Majesty and Canada
Post, shall not be liable in any way for loss of
revenues or contracts, or any other
consequential loss of any kind resulting from
any defect in the data or the Map Data. You
shall indemnify and save harmless the
licensors, including Her Majesty the Queen, the
Minister of Natural Resources of Canada and
Canada Post, and their officers, employees and
agents from and against any claim, demand or
action, irrespective of the nature of the cause of
the claim, demand or action, alleging loss,
costs, expenses, damages or injuries (including
injuries resulting in death) arising out of the use
or possession of the data or the Map Data. The
terms contained in this Section are in addition
to all of the rights and obligations of the parties
under the Agreement. To the extent that any of
the provisions of this Section are inconsistent
with, or conflict with, any other provisions of the
Agreement, the provisions of this Section shall
prevail.
9

20_RT_OM_EN_USC_t.book Page 335

336MULTIMEDIA
United States Map Data . NAVTEQ holds a
non-exclusive license from the United States
Postal Service to publish and sell
ZIP+4 information. ©United States Postal
Service 2010. Prices are not established,
controlled or approved by the United States
Postal Service. The following trademarks and
registrations are owned by the USPS: United
States Postal Service, USPS, and ZIP+4.
Canadian Map Data . Map Data for Canada
includes information taken with permission
from Canadian authorities, including © Her
Majesty, © Queen's Printer for Ontario, ©
Canada Post, GeoBase, © Department of
Natural Resources Canada. All rights reserved.
Australian Map Data . Map Data for Australia is
based on data NAVTEQ has licensed from PSMA
Australia Limited (www.psma.com.au). In
addition, the Product incorporates data which is
© 2019 Telstra Corporation Limited, GM Holden
Limited, Intelematics Australia Pty Ltd, Sentinel
Content Pty Limited and Continental Pty Ltd. If
your Product uses RDS-TMC Codes contained in
the Map Data, the traffic location codes are ©
2019 Telstra Corporation Limited and its
licensors. Term
. This Agreement is effective until such
time as (i) if applicable, your subscription term
is either terminated (by you or by Garmin®) or
expires, or (ii) Garmin® terminates this
Agreement for any reason, including, but not
limited to, if Garmin® finds that you have
violated any of the terms of this Agreement. In
addition, this Agreement shall terminate
immediately upon the termination of an
agreement between Garmin® and any third
party from whom Garmin® licenses the Data.
Entire Agreement . These terms and conditions
constitute the entire agreement between
Garmin (and its licensors, including their
licensors and suppliers) and you pertaining to
the subject matter hereof, and supersedes in
their entirety any and all written or oral
agreements previously existing between us with
respect to such subject matter.
Governing Law.
(a) For European Union NAVTEQ Data
The above terms and conditions shall be
governed by the laws of the Netherlands,
without giving effect to (i) its conflict of laws
provisions, or (ii) the United Nations Convention
for Contracts for the International Sale of
Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the Netherlands for
any and all disputes, claims and actions arising
from or in connection with the NAVTEQ Data
provided to you hereunder.
(b) For North American NAVTEQ Data and other
non-European Union NAVTEQ Data
The above terms and conditions shall be
governed by the laws of Illinois, without giving
effect to (i) its conflict of laws provisions, or (ii)
the United Nations Convention for Contracts for
the International Sale of Goods, which is
explicitly excluded. You agree to submit to the
jurisdiction of Illinois for any and all disputes,
claims and actions arising from or in connection
with the NAVTEQ Data provided to you
hereunder.
(c) For disputes, claims and actions not related
to the NAVTEQ Data
The above terms and conditions shall be
governed by the laws of Kansas, without giving
effect to (i) its conflict of laws provisions, or (ii)
the United Nations Convention for Contracts for
the International Sale of Goods, which is
explicitly excluded. You agree to submit to the
jurisdiction of Kansas for any and all disputes,
claims and actions arising from or in connection
with the Data provided to you hereunder.

20_RT_OM_EN_USC_t.book Page 336

MULTIMEDIA337
Government End Users. If End User is an
agency, department, or other entity of the
United States Government, or funded in whole
or in part by the U.S. Government, then use,
duplication, reproduction, release, modifi -
cation, disclosure or transfer of the Product and
accompanying documentation is subject to
restrictions as set forth in DFARS
252.227-7014(a)(1) (JUN 1995) (DOD
commercial computer software definition),
DFARS 27.7202-1 (DOD policy on commercial
computer software), FAR 52.227-19 (JUN
1987) (commercial computer software clause
for civilian agencies), DFARS 252.227-7015
(NOV 1995) (DOD technical data – commercial
items clause); FAR 52.227-14 Alternates I, II,
and III (JUN 1987) (civilian agency technical
data and noncommercial computer software
clause); and/or FAR 12.211 and FAR 12.212
(commercial item acquisitions), as applicable.
In case of conflict between any of the FAR and
DFARS provisions listed herein and this
License, the construction that provides greater
limitations on the Government’s rights shall
control. The contractor/manufacturer is
Garmin® International, Inc., 1200 East 151st
Street, Olathe, KS 66062, USA and NAVTEQ North America LLC, 425 West Randolph Street,
Chicago, Illinois 60606 USA.
Garmin® is a trademark of Garmin® Ltd. or its
subsidiaries, registered in the USA and other
countries. These trademarks may not be used
without the express permission of Garmin®.
NAVTEQ is a trademark in the U.S. and other
countries. All other company names and
trademarks mentioned or referenced in this
documentation are the properties of their
respective owners. All rights reserved.
DMTI Spatial, Inc. End User License Agreement
The software embedded in your Garmin®
product is owned by Garmin® Ltd. or its subsid
-
iaries (“Garmin®”). The third-party postal code
data (the “Licensed Product”) embedded in or
accompanying your Garmin® product is owned
by DMTI Spatial, Inc. and is licensed to
Garmin®. Both the software and Licensed
Product are protected under copyright laws and
international copyright treaties.
THIS is a legal Agreement between you, the end
user, and DMTI Spatial, Inc. BY LOADING THE
PRODUCT(S) WITH THIS AGREEMENT YOU ARE
AGREEING TO BE BOUND BY THE TERMS OF
THIS AGREEMENT. IF YOU DO NOT AGREE TO
THE TERMS OF THIS AGREEMENT, PROMPTLY (within 7 days of purchase) RETURN THE
PRODUCTS AND ANY ACCOMPANYING ITEMS
(including written materials) TO Garmin®
INTERNATIONAL, INC. CUSTOMER SERVICE,
1200 EAST 151ST STREET, OLATHE, KANSAS
66062, FOR A REFUND.
DMTI Spatial hereby grants to you a
non-exclusive, non-transferable license to use
the data contained on the media in this
package (the “Licensed Product”) solely for
personal non-commercial use or internal use in
your business, on a single computer, Pocket PC,
or Palm device in conjunction with Garmin®
software, and with compatible Garmin®
products that you personally own. Your use of
the data is subject to the following terms and
conditions:
You acknowledge that the Licensed Product(s)
belong to DMTI Spatial and its third party
supplier, and that the Licensed Product(s) are
copyrighted. Unauthorized copying of the
Licensed Product(s), is expressly forbidden and
you may be held legally responsible for
copyright infringement which is caused or
encouraged by your failure to abide by the terms
of this agreement. You may make one archival
copy of the Licensed Product(s), solely for your
own use, subject to the following restrictions:
9

20_RT_OM_EN_USC_t.book Page 337

338MULTIMEDIA
(1) The archival copy must be treated in the
same way as the original copy; (2) No copy may
be used while any other copy is in use. If you
make an archival copy of the Licensed
Product(s), you must include on it the copyright
notice that is on the original media.
You may not reproduce, sell, rent, lease, loan,
distribute or sublicense the Licensed Product(s)
or otherwise transfer the Licensed Product(s) to
any third party, use the Licensed Product for
commercial purposes except for internal use in
your business, decompile, disassemble,
reverse-engineer the Licensed Product(s), or
use the Licensed Product to create any derived
product for any of these prohibited purposes.
You may not place the Licensed Product(s) on
the Internet without a prior written agreement
with DMTI Spatial.
In no event shall DMTI Spatial or its third party
supplier(s) be liable to you or your organization
for any indirect damages including any lost
profits, lost savings, interruption of business,
loss of business opportunities or other
incidental or consequential damages, arising
out of your possession, use of, or inability to use
the Licensed Product(s), even if DMTI Spatial,
its third party supplier(s), or any authorized
dealer, has been advised of the possibility of the damages, or for any claim by any other party. In
no event shall DMTI Spatial have any liability for
damage in excess of the license fee paid for the
Licensed Product(s).
You shall indemnify and hold DMTI Spatial, its
third party supplier(s) and their officers,
employees and agents, harmless from and
against any claim, demand or action,
irrespective of the nature of the claim, demand
or action, alleging loss, costs, damages,
expenses, or injury (including injury from death)
resulting from your authorized or unauthorized,
use, possession, modification, or alteration of
the Licensed Product(s).
THE LICENSED PRODUCT(S) AND THE
ASSOCIATED WRITTEN MATERIALS IN
CONNECTION THEREWITH ARE PROVIDED “AS
IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, ARISING BY LAW OR
OTHERWISE, INCLUDING BUT NOT LIMITED TO
WARRANTIES OF EFFECTIVENESS,
COMPLETENESS, ACCURACY, MERCHANT
-
ABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE
QUALITY AND PERFORMANCE OF THE
LICENSED PRODUCT(S) IS WITH YOU, THE END
USER. NO ORAL OR WRITTEN ADVICE GIVEN BY
DMTI SPATIAL OR ITS DEALERS, DISTRIBUTORS, AGENTS OR EMPLOYEES CREATES A
WARRANTY OR IN NAY WAY INCREASES DMTI
SPATIAL’S LIABILITY AND YOU MAY NOT RELY
ON ANY SUCH INFORMATION OR ADVICE.
No statement or recommendation made or
assistance given by DMTI Spatial or by its
representatives or employees shall constitute a
waiver by DMTI Spatial or any of the provisions
herein. Nor does or will DMTI Spatial warrant
any services it may provide in connection with
the use of the Licensed product(s), to include
any assistance, training, or other consultation
with you.
This license is effective until terminated. This
license will terminate automatically without
notice from DMTI Spatial if you fail to comply
with any provision of this License Agreement.
Upon termination, you shall destroy or return
the Licensed Product(s) including any written
materials and all copies of the Licensed
Product(s) and any written materials in
connection therewith have been destroyed or
returned to DMTI Spatial.
This Agreement shall be governed by the laws of
the Province of Ontario.
©2007 DMTI Spatial Inc. (except for data
licensed from third parties).

20_RT_OM_EN_USC_t.book Page 338

MULTIMEDIA339
DMTI Spatial is an authorized user and
distributor of selected Statistics Canada
Computer files under Licensing Agreement
6230.
© Copyright, HER MAJESTY THE QUEEN IN
RIGHT OF CANADA, as represented by the
Minister of Industry, Statistics Canada 1996.
Digital Topographic Data produced under
license from Her Majesty the Queen in Right of
Canada, with permission of Natural Resources
Canada.
Governing Law. The above terms and conditions
shall be governed by the laws of the State of
Illinois, without giving effect to (i) its conflict of
laws provisions, or (ii) the United Nations
Convention for Contracts for the International
Sale of Goods, which is explicitly excluded. You
agree to submit to the jurisdiction of the State of
Illinois for any and all disputes, claims and
actions arising from or in connection with the
Traffic Data provided to you hereunder. Government End Users. If the Traffic Data is
being acquired by or on behalf of the United
States government or any other entity seeking
or applying rights similar to those customarily
claimed by the United States government, this
Data is a “commercial item” as that term is
defined at 48 C.F.R. (“FAR”) 2.101, is licensed
in accordance with this Agreement, and the
Traffic Data delivered or otherwise furnished
shall be marked and embedded as appropriate
with the following “Notice of Use,” and shall be
treated in accordance with such Notice:
Notice of Use
Contractor (Manufacturer/ Supplier) Name:
NAVTEQ
Contractor (Manufacturer/supplier) Address:
425 West Randolph Street, Chicago, Illinois
60606.
This Data is a commercial item as defined in
FAR 2.101 and is subject to the NAVTEQ Traffic
End User License Agreement under which this
Data was provided.
© 2019 NAVTEQ; © 2019 Traffic.com – All
rights reserved.If the Contracting Officer, federal government
agency, or any federal official refuses to use the
legend provided herein, the Contracting Officer,
federal government agency, or any federal
official must notify NAVTEQ prior to seeking
additional or alternative rights in the Traffic
Data.
NAVTEQ and Traffic.com are trademarks in the
U.S. and other countries. © 2019 NAVTEQ; ©
2019 Traffic.com. All rights reserved.
HD Radio™ Technology manufactured under
license from iBiquity Digital Corporation. U.S.
and Foreign Patents. HD Radio™ and the HD,
HD Radio™, and "Arc" logos are proprietary
trademarks of iBiquity Digital Corp.
Garmin® is a trademark of Garmin® Ltd. or its
subsidiaries, registered in the USA and other
countries. This trademark may not be used
without the express permission of Garmin®. All
other company names and trademarks
mentioned or referenced in this documentation
are the properties of their respective owners. All
rights reserved.
9

20_RT_OM_EN_USC_t.book Page 339

340MULTIMEDIA
STEERING WHEEL AUDIO CONTROLS — IF
EQUIPPED

Remote Sound System Controls (Back View Of Steering
Wheel)

The remote sound system controls are located
on the rear surface of the steering wheel, at the
three and nine o'clock positions.
The right-hand rocker switch has a push-button
in the center, and controls the volume and
mode of the sound system. Pushing the top of
the rocker switch will increase the volume.
Pushing the bottom of the rocker switch will
decrease the volume. Pushing the center
button changes the operation of the radio from
AM to FM, or to CD mode. The left-hand rocker switch has a push-button in
the center. The function of the left-hand switch
is different, depending on which mode you are
in.
The following describes the left-hand rocker
switch operation in each mode.
Radio Operation
Pushing the top of the switch will Seek Up for
the next listenable station, and pushing the
bottom of the switch will Seek Down for the next
listenable station.
The button located in the center of the left-hand
switch will tune to the next preset station that
you have programmed in the radio preset
push-button.
CD Player
Pushing the top of the switch once will go to the
next track on the CD. Pushing the bottom of the
switch once will go to the beginning of the
current track, or to the beginning of the previous
track if it is within one second after the current
track begins to play.
If you push the switch up or down twice it plays
the second track; three times, it will play the
third, etc.The button in the center of the left-hand switch
has no function in this mode.
USB/MP3 CONTROL — IF EQUIPPED
This feature allows a external USB device to be
plugged into the USB port, located in the glove
compartment. If equipped, there may also be
two USB ports located on the lower trim piece
right behind the driver’s sliding door that are for
charging devices only.
iPod® control supports Mini, 4G, Photo, iPod®
nano, 5G iPod® and iPhone® devices. Some
iPod® software versions may not fully support
the iPod® control features. Please visit
Apple’s® website for software updates.
NOTE:
Connecting a consumer electronic audio device
to the AUX port located in the radio faceplate,
plays media, but does not use the MP3 control
feature to control the connected device.

20_RT_OM_EN_USC_t.book Page 340

MULTIMEDIA341
Connecting The External USB Device
Use the connection cable to connect a external
USB device to the vehicle's USB connector port
which is located in the glove compartment.

USB Port

NOTE:
The glove compartment will have a position
where the consumer electronic audio device
cable can be routed through without damaging
the cable when closing the lid. This allows
routing of the cable without damaging it while
closing the lid. If a cut out is not available in the
glove compartment, route the cable away from
the lid latch and in a place that will allow the lid
to close without damaging the cable. Once the audio device is connected and
synchronized to the vehicle's USB/MP3 control
system (External USB device may take a few
minutes to connect), the audio device starts
charging and is ready for use by pushing radio
buttons.
NOTE:
If the audio device battery is completely
discharged, it may not communicate with the
USB/MP3 control system until a minimum
charge is attained. Leaving the audio device
connected to the USB/MP3 control system may
charge it to the required level.
Using This Feature
By using an external USB device to connect to
the USB port:
The audio device can be played on the
vehicle’s sound system, providing metadata
(artist, track title, album, etc.) information on
the radio display.
The audio device can be controlled using the
radio buttons to Play, Browse, and List the
audio device’s contents.
The audio device battery charges when
plugged into the USB connector (if supported
by the specific audio device).
Controlling The External USB Device Using
Radio Buttons
To enter the AUX/USB/MP3 control mode and
access a connected audio device, either push
the Aux button on the radio faceplate or push
the VR button and say "USB" or "Switch to USB."
Once in the AUX/USB/MP3 control mode, audio
tracks (if available from audio device) start
playing over the vehicle's audio system.
Play Mode
When switched to AUX/USB/MP3 control mode,
the external USB device automatically starts
Play mode. In Play mode, the following buttons
on the radio faceplate may be used to control
the external USB device and display data:
Use the TUNE control knob to select the next
or previous track.
Turning it clockwise (forward) by one
click, while playing a track, skips to the
next track or push the Voice Recognition
(VR) button and say "Next Track".
9

20_RT_OM_EN_USC_t.book Page 341

342MULTIMEDIA
Turning it counterclockwise (backward)
by one click will jump to the previous
track in the list or push the VR button and
say "Previous Track".
Jump backward in the current track by
pushing and holding the << RW button.
Holding the << RW button long enough will
jump to the beginning of the current track.
Jump forward in the current track by pushing
and holding the FF >> button.
A single push backward << RW or forward FF
>> will jump backward or forward respec -
tively, for five seconds.
Use the << SEEK and SEEK >> buttons to
jump to the previous or next track. Pushing
the SEEK >> button during play mode will
jump to the next track in the list, or push the
VR button and say "Next or Previous Track."
While a track is playing, push the INFO button
to see the associated metadata (artist, track
title, album, etc.) for that track. Pushing the
INFO button again jumps to the next screen
of data for that track. Once all screens have
been viewed, the last INFO button push will
go back to the play mode screen on the radio.
Pushing the Repeat button will change the
audio device mode to repeat the current
playing track or push the VR button and say
"Repeat On" or "Repeat Off".
Push the Scan button to use AUX/USB/MP3
device scan mode, which will play the first 10
seconds of each track in the current list and
then forward to the next song. To stop Scan
mode and start playing the desired track,
when it is playing the track, push the Scan
button again. During Scan mode, pushing the
<< SEEK and SEEK >> buttons will select the
previous and next tracks.
RND button: Pushing this button toggles
between Shuffle ON and Shuffle OFF modes
for the external USB device, or push the VR
button and say "Shuffle On" or "Shuffle Off." If
the RND icon is showing on the radio display,
then the shuffle mode is On.
List Or Browse Mode
During Play mode, pushing any of the buttons
described below will bring up List mode. List
mode enables scrolling through the list of
menus and tracks on the audio device. Tune control knob: The Tune control knob
functions in a similar manner as the scroll
wheel on the audio device or external USB
device.
Turning it clockwise (forward) and counter-
clockwise (backward) scrolls through the
lists, displaying the track detail on the radio
display. Once the track to be played is high-
lighted on the radio display, push the Tune
control knob to select and start playing the
track. Turning the TUNE control knob fast will
scroll through the list faster. During fast
scroll, a slight delay in updating the informa
-
tion on the radio display may be noticeable.
In List mode, the radio Preset buttons are used
as shortcuts to the following lists on the
external USB device:
Preset 1 – Playlists
Preset 2 – Artists
Preset 3 – Albums
Preset 4 – Genres
Preset 5 – Audiobooks
Preset 6 – Podcasts

20_RT_OM_EN_USC_t.book Page 342