2019 YAMAHA FX HO CRUISER Owners Manual

Description
19
EJU43331
Watercraft glossary
Trolling speed
“Trolling” is the lowest maneuvering speed. You are applying little or no throttle. The water-
craft is down in the water, and there is no wake.
Sub-planing speed
“Sub-planing” is a medium speed. The bow of the watercraft is slightly up from the water sur-
face, but you are still traveling through the water. There is a wake.
Planing speed
“Planing” is a faster speed. The watercraft is more level and is skimming on top of the water.
There is a wake.
Bow
The front end of the watercraft.
Stern
The rear end of the watercraft.
Starboard
The right side of the watercraft when facing forward.
Port
The left side of the watercraft when facing forward.
Bilge water
Water that has collected in the engine compartment.
Yamaha Engine Management System (YEMS)
YEMS is an integrated, computerized management system that controls and adjusts ignition
timing, fuel injection, engine diagnostics, and the off-throttle steering (OTS) system.
Reverse with Intuitive Deceleration Electronics (RiDE)
RiDE is an electronic system that controls the reverse, neutral, and deceleration operations of
the watercraft.
UF3V70E0.book Page 19 Tuesday, August 28, 2018 10:16 AM

Description
20
EJU31012
Location of main components
Exterior
1
6
78
910
5
234
1Hood
2Beverage holder (page 53)
3Pull-up cleat (FX Cruiser HO) (page 51)
4Footwell
5Optional part mounting bracket
6Fuel filler cap (page 56)
7Front seat (page 48)
8Rear seat (page 48)
9Cooling water pilot outlet (page 28)
10Bow eye (page 50)
UF3V70E0.book Page 20 Tuesday, August 28, 2018 10:16 AM

Description
21
1
2
3
4
5
6
8
13
12
6
8
111097
1Handgrip (page 49)
2Cleat (page 50)
3Stern storage compartment (page 52)
4Reboarding grip (page 49)
5Boarding platform
6Stern eye (page 50)
7Intake grate
8Stern drain plug (page 59)
9Ride plate
10Jet thrust nozzle
11Reverse gate (page 29)
12Reboarding step (page 49)
13Flushing hose connector (page 85)
UF3V70E0.book Page 21 Tuesday, August 28, 2018 10:16 AM

Description
22
1
2
1
10
111213
20
1918
17
1614
15
2
8
394
567
1Handlebar
2Rearview mirror
3RiDE lever (page 29)
4Start switch (page 25)
5Engine shut-off switch (page 25)
6Clip (page 25)
7Engine shut-off cord (lanyard) (page 25)
8Multifunction information center (page 39)
9Throttle lever (page 26)
10“SPEED CONTROL” up switch (page 33,
34, 37)
11“SPEED CONTROL” down switch (page 33,
34, 37)12“SET” switch (page 37)
13“NO-WAKE MODE” switch (page 34)
14Tilt lever (page 27)
15Glove compartment (page 52)
16“ALARM MUTE” button (page 40)
17“MENU SCROLL” button (page 40)
18Engine stop switch (page 25)
19“TRIM/T.D.E.” down switch (page 31, 33)
20“TRIM/T.D.E.” up switch (page 31, 33)
UF3V70E0.book Page 22 Tuesday, August 28, 2018 10:16 AM

Description
23
Engine compartment
12
5
7
8
910
6
43
1Dipstick (page 58)
2Engine oil filler cap (page 58)
3Electrical box
4Battery (page 66)
5Removable watertight storage compart-
ment (page 53)
6Spark plug/Ignition coil
7Fuel tank
8Water separator (page 28)
9Air filter case
10Engine cover
UF3V70E0.book Page 23 Tuesday, August 28, 2018 10:16 AM

Control function operation
24
EJU31026
Watercraft control functionsEJU45090Yamaha Security System
The Yamaha Security System functions to
help prevent unauthorized use or theft of the
watercraft. The lock and unlock modes of the
security system can be selected using the
engine lock screen of the multifunction infor-
mation center. The engine cannot be started
if the lock mode of the security system is se-
lected. The engine can only be started if the
unlock mode is selected.
TIP:
The Yamaha Security System setting can
only be selected while the engine is stopped.
EJU45100Yamaha Security System setting
The Yamaha Security System setting can be
confirmed by the lock or unlock mode indica-
tor on the multifunction information center.
To select the lock or unlock mode of the
Yamaha Security System:
(1) Stop the engine.
TIP:
If the multifunction information center is
turned off because the engine is stopped,
perform one of the following operations to
turn on the center without starting the engine.
Push the start switch briefly.
While pushing the engine stop switch,
push the start switch.(2) Tap the lock or unlock mode indicator on
the multifunction information center.
(3) Flick up or down to set each digit of the
4-digit PIN, and then tap the “Enter” but-
ton.
TIP:
The default setting for the PIN is “1234”. The
PIN can also be changed. (See page 43 for in-
formation on changing the PIN.)
(4) Tap “ON” to select the lock mode of the
Yamaha Security System or tap “OFF” to
select the unlock mode, and then tap
“Save”.
(5) The beeper sounds once when the lock
mode of the Yamaha Security System is
selected and two times when the unlock
mode is selected, and the multifunction
information center returns to the home
screen.
1Lock mode indicator
2Unlock mode indicator
1
2
Enter
Enter PIN
0
9
1
0
9
1
0
9
1
0
9
1
ONOFF
Engine Lock
Save
UF3V70E0.book Page 24 Tuesday, August 28, 2018 10:16 AM

Control function operation
25
EJU31153Engine stop switch “ ”
The engine stop switch (red button) stops the
engine when the switch is pushed.
EJU31164Engine shut-off switch “ ”
The engine shut-off switch automatically
stops the engine when the clip, on the end of
the engine shut-off cord (lanyard), is removed
from the switch, such as if the operator falls
off the watercraft.
Insert the clip under the engine shut-off
switch before starting the engine.
When the engine is not running, remove the
clip from the engine shut-off switch to pre-vent accidental starting or unauthorized op-
eration by children or others.
EJU42323Start switch “ ”
NOTICE
ECJ01311
Do not run the engine over 4000 r/min on
land. Also, do not run the engine for more
than 15 seconds without supplying water,
otherwise the engine could overheat.
The start switch (green button) starts the en-
gine when the switch is pushed.
Release the start switch as soon as the en-
gine starts to run. If the engine does not start
in 5 seconds, release the start switch, wait 15
seconds, and then try again. NOTICE: Never
push the start switch while the engine is
running. Do not operate the start switch
for more than 5 seconds, otherwise the
battery will be discharged and the engine
1Engine stop switch
1Engine shut-off switch
2Clip
3Engine shut-off cord (lanyard)
1
1
2
3
UF3V70E0.book Page 25 Tuesday, August 28, 2018 10:16 AM

Control function operation
26
will not start. Also, the starter motor could
be damaged.
[ECJ01041]
The engine will not start under any of the fol-
lowing conditions:
Lock mode of the Yamaha Security System
has been selected. (See page 24 for
Yamaha Security System setting proce-
dures.)
Clip is removed from the engine shut-off
switch.
Throttle lever is squeezed.
Throttle lever is malfunctioning.
RiDE lever is squeezed.
RiDE lever is malfunctioning.EJU31212Throttle lever
The throttle lever increases the engine speed
when the lever is squeezed.
The throttle lever returns automatically to its
fully closed (idle) position when released.
EJU43342RiDE lever
When the RiDE lever is squeezed, the reverse
gate lowers and the watercraft starts moving
in reverse. If the watercraft is moving forward,
the watercraft gradually slows down until it
stops, and then the watercraft starts moving
in reverse.
When the RiDE lever is released, it automati-
cally returns to its fully closed (idle) position
and the reverse gate moves to the neutral po-
sition.
EJU31262Steering system
By turning the handlebars in the direction you
wish to travel, the angle of the jet thrust noz-
1Start switch
1Throttle lever
1
1
1RiDE lever
1
UF3V70E0.book Page 26 Tuesday, August 28, 2018 10:16 AM