2019 MERCEDES-BENZ CLA COUPE mirror

X
To start programmode :pre ssand holdone
of buttons 0044to0085 onthe integrated garag e
do or opene r.
The garag edo or opene ris now inpro gram
mod e.After asho rttime ,ind icator lamp 0043
li ghts upyellow .
Indi cato rla mp 0043lights upyellow assoo nas
bu tton 0044,0087or0085 isstor edfor the first time .
If the selecte dbu tton hasal rea dybeen pro -
gra med ,ind icator lamp 0043willonl ylight up
ye llow afte rten seco ndshave elap sed .
X Re leas ebu tton 0044,0087or0085. Indicato r
la mp 0043flashe sye llow .
X To prog ramtheremo tecontro l:po int
ga rag edo or rem otecontro l0083 tow ardsbu t-
tons 0044to0085 onthe rear-view mirror atadi s-
tance of2to 8in (5 to 20 cm).
X Pre ssand holdbu tton 0084onrem otecontro l
0083 unti lind icator lamp 0043lights upgre en.
Whe nind icator lamp 0043lights upgre en: pro-
gra mmi ngisfini she d.
Whe nind icator lamp 0043flashe sgre en: pro-
gra mmi ngwassu cces sful.The next step isto
sy nchro nizetherolling cod e(Y page 256 ).
X Re leas ebu tton 0084onrem otecontro l0083 for
the garag edo or drive system .
If ind icator lamp 0043lights upred :rep eatthe
pro graming proced urefor the corr espond ing
bu tton onthe rear-view mirror. Whe ndo ing
so, varythe dista nce betwe enrem otecontro l
0083 and therear-view mirror.
The required dista nce betwe enrem otecon-
trol 0083and theinte grated garag edo orop ene r
de pends onthe garag edo or drive system .
Seve ralatte mpts mightbe nece ssary.Yo u
sho uld test everypositio nfor atleas t
25 seco ndsbefore trying ano ther positio n.
Syn chro nizin gthe rolling code
Pa yatte ntionto the "Impo rtant safety notes "
(Y page 255 ).
If the garag edo or system uses arol ling cod e,
yo uwi llal so have tosynchro nizethegarag e
do or system with the integrated garag edo or
op ene rin the rear-view mir ror. Todo thisyo uwi ll
nee dto usethe programmi ngbutton onthe door
dri ve contro lpa nel .The programmi ngbutton
ma ybe locate din differ ent place sde pe ndi ngon
the manufa cturer.Itis us ua lly lo cate don the
do or drive uni ton the garag ecei ling.
Fam ilia rize yoursel fwi th the garag edo or drive
op era ting instruc tions, e.g.und er"Prog ram - ming
additio nal rem otecontro ls", be fore carry-
ing outthe followi ng step s.
Yo ur veh iclemu stbe withi nrea chofthe garag e
do or or gate opene rdri ve. Makesure tha tnei -
ther your veh iclenor any perso ns/ob jectsare
pre sent withi nthe sweepof the door orgate.
X Tu rn the Sma rtKey topo sitio n2 in the igniti on
lo ck (Ypage 123) .
X Ge tou tof the vehicle.
X Pre ssthe programmi ngbutton onthe door
dri ve uni t.
Usu ally,yo unow have 30 seco ndstoinitia te
the next step.
X Ge tinto thevehicle.
X Pre sspre viouslypro gramed button 0044,0087
or 0085 onthe integrated garag edo or opene r
rep eated lyand inqu ick succes sion unti lthe
do or clo ses .
The rolling cod esy nchro nizationis then com-
pl ete.
Note son prog rammin gthe remo tecon-
trol
Ca nad ianrad iofreq uency laws req uire a"b rea k"
(o rinte rruption) ofthe trans mission signa ls
afte rbro adcas ting forafew seco nds.Therefo re,
thes esigna lsma ynot last long enou ghfor the
inte grated garag edo or opene r.The signa lis not
de tecte ddu ring programmi ng.Compa rablewi th
Ca nad ian law, som eU.S. garag edo or opene rs
al so fea ture a"b rea k".
Pro cee das follows :
R ifyo ulive inCa nad a
R ifyo uha ve diffi cul tiespro grammi ngthe
ga rag edo or opene r(re gardl ess ofwh ere you
li ve) asyoufol low the programmi ngstep s.
X Pre ssand holdone ofbu ttons 0044to0085 onthe
inte grated garag edo or opene r.
After asho rttime ,ind icator lamp 0043lights up
ye llow .
X Re leas ethe button.
Indi cato rla mp 0043flashe sye llow .
X Pre ssbutton 0084ofgarag edo or rem otecon-
trol 0083for two seco nds,then release itfor two
seco nds.
X Pre ssbutton 0084again for two seco nds.
X Re peatthi sseq uence onbutton 0084ofrem ote
contro l0083 unti lind icator lamp 0043lights up
gre en.
Whe nind icator lamp 0043lights upgre en: pro-
gra mmi ngisfini she d. 25
6 Fe
aturesSto wag ean dfe ature s

When
indicator lamp0043flashes green:pro-
gramming wassuccessf ul.The next step isto
synchr onizetherolling code.
X Release button0084ofremot econt rol0083 ofthe
garage doordrive.
If indicator lamp0043lights upred: repeat the
programmin gprocess forthe corr esponding
button onthe rear-v iewmirror. Whendoing
so, vary thedistanc ebetween remotecont rol
0083 and therear-v iewmirror.
The required distancebetween remotecon-
trol 0083and theintegr atedgarage dooropener
depends onthe garage doordrive system.
Several attemptsmight beneces sary.You
should testevery position foratleast
25 secon dsbefore tryinganother position.
Problems whenprogram ming
If you areexperien cingproblems programmin g
the integr atedgarage dooropener onthe rear-
view mirror, takenoteof the following instruc-
tions :
R Check thetran smitt erfrequenc yused by
garage doordrive remot econt rol0083 and
whether itis supported. Thetransmitt erfre-
quency canusually befound onthe back of
remot econt rol0083 for the garage doordrive.
The integr atedgarage dooropener iscom-
patible withdevices thathave units which
operate inthe frequenc yrange of280 to
433 MHz.
R Replace thebatter iesingarage doorremot e
cont rol0083. This increases thelikelihood that
garage doorremot econt rol0083 will tran smit a
stron gand precise signaltothe integr ated
garage dooropener.
R When programmin g,hold remot econt rol0083
at varying distancesand angles frombut-
ton s0044 to0085 which youareprogrammin g.Try
various anglesatadistanc ebetween 2and
8 inches (5to20cm) oratthe same angle but
at varying distances.
R Ifanother remotecont rol0083 isavailable for
the same garage doordrive, repeat thesame
programmin gsteps withthisremot econt rol
0083. Before perform ingthese steps, makesure
that new batter ieshave been installed in
garage doordrive remot econt rol0083.
R Note thatsome remot econt rolsonly transmit
for alimited amount oftime (theindicator
lamp onthe remot econt rolgoes out).Press button
0084onremot econt rol0083 again before
tran smission ends.
R Align theanten nacable ofthe garage door
opener unit.Thiscanimprove signalrecep-
tion/ transmission.
Opening/closi ngthe gara gedoor Aft
erithas been programmed, theintegr ated
garage dooropener perform sthe funct ionofthe
garage doorsystem remotecont rol.Please also
read theoperating instruction sfor the garage
door system.
X Turn theSmart Keytoposition 2in the ignition
lock (Ypage 123).
X Press button 0044,0087or0085 which youhave
programmed tooperate thegarage door.
Garage doorsystem withafixed code: indi-
cator lamp0043lights upgreen.
Garage doorsystem witharolling code:indi-
cator lamp0043flashes green.
The transmitt erwill tran smit asignal aslong
as the button ispressed. Thetransmission is
halted afteramaximum often secon dsand
indicator lamp0043lights upyellow.
X Press button 0044,0087or0085 again ifneces sary.
Clearing thememor y Make
surethatyouclear thememory ofthe
integr atedgarage dooropener beforesellingthe
vehicle.
X Turn theSmart Keytoposition 2in the ignition
lock (Ypage 123).
X Press andhold button s0044 and 0085.
The indicator lampinitially lightsupyellow
and then green.
X Release buttons0044 and 0085.
The memory ofthe integr atedgarage door
opener inthe rear-v iewmirror iscleared. Featur
es
257Stowage andfeatures Z

Comp
ass
Callin gup thecomp ass 0043
Rear viewmirror
0044 Comp assdispl ay
0087 Open ing
The com pass displaysinwhic hcom pass direc-
tio nth eveh icle iscur ren tlytraveli ng:N N,
NE NE,
E E,
SE SE,
S S,
SW SW,
W W
or NW NW.
To rec eive acor rectcom pass displayread ing,
th emagn etic fiel dzo ne must beset and the
com pass calibrated.
Set tingth ecomp ass X
Set your locatio nusin gth emagn etic fiel d
zo ne maps (Ypage 258).
X Push aroun dpen intoopen ing0087for appro x-
imat elythree seconds.
The magn etic fiel dzo ne cur ren tlyselec ted
appear sin com pass display0044.
X To select thema gnet icfield zone:push a
roun dpen intoopen ing0087untilth edesir ed
magn etic fiel dzo ne isselec ted.
If ,aft erafew seconds, thedispl ayincom pass
displ ay0044 chang esdire ction ,th emagn etic
fiel dzo ne has been selected. Calib
ratin gth ecomp ass Not
es
In ord erto calib rateth ecom pass correctly, do
th efoll owin g:
R calib rateth ecom pass intheopen andnotin
th evic inity of steel struc turesorhigh -volt age
tr ans mis sion lines.
R swit choff elec trical consume rssuc has the
clim atecon trol, wind shieldwiper sor rear win-
dow defroster.
R clo sealldoor sand thetrunk lid.
Calib ratin g
X Mak esure that there issuff icientspac efor
you todriv ein acir cle without impedingtraf-
fic .
X Swit chon theign ition .
X Push aroun dpin intoopen ing0087for appro x-
imat elysixsec onds, untilsymb olC C
is sho wnin
com pass display0044.
X Dr ive your vehicle inafull circle atappro x-
imat ely3mph (5km /h)to 6mph (10km/h).
When thecalib ration has been successful ly
com pleted,thecur ren tdire ction issho wnin
com pass display0044.
Ma gnet icfield zone maps Nor
thAmer ica 258
Feat
uresSt owage andfeatures

Clean
ingwiper blades G
WAR
NING
You couldbec ome trapped bythewind shield
wiper sif th ey start mov ingwhile cleanin gth e
wind shieldor wiper blades .Ther eis aris kof
inj ury.
Always switchoff thewind shieldwiper sand
th eign ition bef ore cleanin gth ewind shieldor
wiper blades .
! On
lyfold thewind shieldwiper saway from
th ewind shieldwhen vertical. Other wise, you
will damag eth ehood .
! Do
notpull thewiper blade. Other wise, the
wiper bladecouldbe damag ed.
! Do
notcle an wiper blades toooft en and do
no trub them toohard .Ot her wise, thegrap h-
ite coa tingcoul dbe damag ed.This could
caus ewiper noise.
! Hol
dth ewiper armsecurely when folding
back .The wind shieldcoul dbe damag edifth e
wiper armsmac ksagain stitsudde nly.
X Fol dth ewind shieldwiper armsaway from the
wind shield.
X Caref ullyclean thewiper blades withadamp
clo th.
X Fol dth ewind shieldwiper armsback again
bef ore swit ching ontheign ition .
Clean ingtheext erior ligh ting !
On
lyuse cleanin gagen tsor cle anin gclo ths
whic hare suitable forplast iclight lenses .
Un suit able cleanin gagen tsor cle anin gclo ths
coul dsc rat ch ordamag eth eplast iclight len-
ses .
X Clean theplast iclen ses oftheex terior light s
wit hawet spon geand amild cleanin gagen t,
e.g .Mer cedes-Ben zcar sham pooorcle anin g
clo ths.
Clean ingthemir ror turn signa ls !
On
lyuse cleanin gagen tsor cle anin gclo ths
th at are suit able forplast iclen ses .Un suit able
cle anin gagen tsor cle anin gclo thscoul d
sc rat ch ordamag eth eplast iclen ses ofthe
mir ror turnsign als. X
Clean theplast iclen ses ofthemir ror turnsig-
nals intheex terior mirror hous ingusin gawet
spon geand mild cleanin gagen t,e.g .
Mer cedes-Ben zcar sham pooorcle anin g
clo ths.
Clean ingthesensor s !
If
you clean thesen sorswit hapower
washe r,mak esure that you keep adist ance
of at least 11.8in(30 cm)be tweenthe vehicle
and thepower washer nozzle. Infor mat ion
about thecor rectdist anceis availabl efrom
th eequipm entman ufacturer. X
Clean sensors0043 ofthedriv ingsyst ems with
wate r,car sham pooandasof tclo th.
Cleani ngtherea rview camera !
Do
notcle an thecam eralensand thearea
aroun dth erear view camerawith apower
washer . Car
e
269Maintenance andcare Z